Overlay vanished after night to day transition

[ByKryptox]

First of all, i will to say sorry for my English skills.
My Problem is, when i wake up in the morning, the overlay is gone. I checkt, that in the Moduls, the Daytime and NIghttime overlay is checked. Then I also checked if something is out of the frame and red marked.
I read that ther is an option to starte manualy the debug mode. Where I have to set the debug mode 4 or 3 and where I can finde the log. The overlay is set to "module"

I am using an Raspberry PI 3b Rev 1.2 with an charger 5V and 2.5A. Also i measure the MaxWatt - it was 7W.
Also i have a splitter with an transitor of 91 Ohm which generate a little bit heat an take max 2 W, so the charge ris no overloaded.

Webseit Version: v2023.05.01
Allsky Version: v2023.05.01_05

I also have no idea, how to update.

[EricClaeys]

@ByKryptox,

The Debug Level defaults to 1 which doesn't output much to the log file.
You can change it in the WebUI. Level 3 is what's needed to provide us enough detail for troubleshooting.
Level 4 is not needed unless we tell you to use it.
The log file is /var/log/allsky.log.
If you run grep ERROR /var/log/allsky.log you'll see what errors there are.

I suggest upgrading to the newest release. It fixes a lot of bugs and is easier to troubleshoot.
Look in the Installing / Upgrading -> Allsky Documentation page via the WebUI. It explains how to upgrade Allsky.
After the upgrade you'll want to upgrade the Website as well. The installation will tell you what to do, but it's also in the Documentation.

If you still have the problem after upgrading, let me know.

[ByKryptox]

Hey,
tanks for the reply.
I set the debug mode on 3 - and also changed in the module manager under settings, to disable the : "Enable the module watchdog. This will automatically disable slow running modules". I look tomorrow in the morning if the layout has been visible or invisble.

Thanks for the info how to update. I feel a littel bit unsure about it. I have an image from an Youtuiber "Daniel Nimmervoll" installed and a lot of people say, that work perfectly, and i dont know, if i install a new Version other errors occurse. I try to fix first the overlay problem.

Thanky You !

[ByKryptox]

Hello, as is say, i have deaktivating in the module manager "Enable the module watchdog. This will automatically disable slow running modules" and it looks like my problem i solved. I took day and night pictures, so it can be possible, that the overlay dosent respond equal to an image, and thats why the overlay was disabled. Thats exacty what i see, it was 10:30 and the overlay shows 10:25 and has something like an latency, but thats okay. I will be deactivating the day images, so the PI dont have to work that long. I look tomorrow if the overlay is still happen and when everything is fine, i will close this comment. Tanks

[EricClaeys]

@ByKryptox,
Thanks for the update.
What is the URL to the video from Daniel Nimmervoll?