demistify_config_pkg.vhd

-- DeMiSTifyConfig_pkg.vhd
-- Copyright 2021 by Alastair M. Robinson

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;


package demistify_config_pkg is
constant demistify_romspace : integer := 15; -- 32k address space to accommodate 8k + 8K of ROM
constant demistify_romsize1 : integer := 14; -- 16k for the first chunk
constant demistify_romsize2 : integer := 13; -- 8k for the second chunk

-- Core-specific button mapping.
-- Joysticks are (currently) 8 bits width, with the directions in the lower four bits.
-- Button 1 is the main fire button, Button 2 is the secondary fire button to the right of button 1
-- Button 3 is a third (possibly less conveniently placed) button 
-- Button 4 is mapped as a "start" or "run" button.

-- By adjusting the following constants you can assign each button a place in the joystick bitmap.
-- The Megadrive core, for instance, expects the following bitmap:
-- start(7) C(6) B(5) A(4) directions(3:0)
-- Since Megadrive button B is the most important, we map button 1 -> B, button 2 -> C, button 3 -> A
-- and button 4 -> Start, hence button1 = 5, button2 = 6, button3 = 4 and button4 = 7,

constant demistify_button1 : integer := 4;
constant demistify_button2 : integer := 5;
constant demistify_button3 : integer := 6;
constant demistify_button4 : integer := 7;

constant demistify_serialdebug : std_logic := '0';

-- Declare guest component
	
COMPONENT mistery_top
	PORT
	(
		CLOCK_27 :	IN STD_LOGIC_VECTOR(1 downto 0);
--		RESET_N :   IN std_logic;
		LED	: out STD_LOGIC;
		SDRAM_DQ		:	 INOUT STD_LOGIC_VECTOR(15 DOWNTO 0);
		SDRAM_A		:	 OUT STD_LOGIC_VECTOR(12 DOWNTO 0);
		SDRAM_DQML		:	 OUT STD_LOGIC;
		SDRAM_DQMH		:	 OUT STD_LOGIC;
		SDRAM_nWE		:	 OUT STD_LOGIC;
		SDRAM_nCAS		:	 OUT STD_LOGIC;
		SDRAM_nRAS		:	 OUT STD_LOGIC;
		SDRAM_nCS		:	 OUT STD_LOGIC;
		SDRAM_BA		:	 OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
		SDRAM_CLK		:	 OUT STD_LOGIC;
		SDRAM_CKE		:	 OUT STD_LOGIC;
		SPI_DO_IN	:	 IN STD_LOGIC;
		SPI_DO		:	 OUT STD_LOGIC;
		SPI_DI		:	 IN STD_LOGIC;
		SPI_SCK		:	 IN STD_LOGIC;
		SPI_SS2		:	 IN STD_LOGIC;
		SPI_SS3		:	 IN STD_LOGIC;
		SPI_SS4		:	 IN STD_LOGIC;
		CONF_DATA0		:	 IN STD_LOGIC;
		VGA_HS		:	 OUT STD_LOGIC;
		VGA_VS		:	 OUT STD_LOGIC;
		VGA_R		:	 OUT STD_LOGIC_VECTOR(5 DOWNTO 0);
		VGA_G		:	 OUT STD_LOGIC_VECTOR(5 DOWNTO 0);
		VGA_B		:	 OUT STD_LOGIC_VECTOR(5 DOWNTO 0);
		UART_TX	:	OUT STD_LOGIC;
		UART_RX	:	IN STD_LOGIC := '1';
		AUDIO_L  : out std_logic;
		AUDIO_R  : out std_logic;
		DAC_L		: OUT SIGNED(15 DOWNTO 0);
		DAC_R		: OUT SIGNED(15 DOWNTO 0);
		DAC_MIDI_L		: IN SIGNED(15 DOWNTO 0);
		DAC_MIDI_R		: IN SIGNED(15 DOWNTO 0);

		PS2K_CLK : in std_logic;
		PS2K_DAT : in std_logic;
		PS2M_CLK : in std_logic;
		PS2M_DAT : in std_logic
	);
END COMPONENT;
	
end package;