-
-
Notifications
You must be signed in to change notification settings - Fork 3
/
Copy pathcmd_ide.c
1575 lines (1323 loc) · 38.9 KB
/
cmd_ide.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
* (C) Copyright 2000-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* IDE support
*/
#include <common.h>
#include <config.h>
#include <watchdog.h>
#include <command.h>
#include <image.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA)
# include <pcmcia.h>
#endif
#include <ide.h>
#include <ata.h>
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
#ifdef __PPC__
# define EIEIO __asm__ volatile ("eieio")
# define SYNC __asm__ volatile ("sync")
#else
# define EIEIO /* nothing */
# define SYNC /* nothing */
#endif
/* ------------------------------------------------------------------------- */
/* Current I/O Device */
static int curr_device = -1;
/* Current offset for IDE0 / IDE1 bus access */
ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS] = {
#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
CONFIG_SYS_ATA_IDE0_OFFSET,
#endif
#if defined(CONFIG_SYS_ATA_IDE1_OFFSET) && (CONFIG_SYS_IDE_MAXBUS > 1)
CONFIG_SYS_ATA_IDE1_OFFSET,
#endif
};
static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS];
block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_RESET
static void ide_reset (void);
#else
#define ide_reset() /* dummy */
#endif
static void ide_ident (block_dev_desc_t *dev_desc);
static uchar ide_wait (int dev, ulong t);
#define IDE_TIME_OUT 2000 /* 2 sec timeout */
#define ATAPI_TIME_OUT 7000 /* 7 sec timeout (5 sec seems to work...) */
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
#ifndef CONFIG_SYS_ATA_PORT_ADDR
#define CONFIG_SYS_ATA_PORT_ADDR(port) (port)
#endif
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
static ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt,
void *buffer);
#endif
/* ------------------------------------------------------------------------- */
int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
int rcode = 0;
switch (argc) {
case 0:
case 1:
return CMD_RET_USAGE;
case 2:
if (strncmp(argv[1], "res", 3) == 0) {
puts("\nReset IDE"
#ifdef CONFIG_IDE_8xx_DIRECT
" on PCMCIA " PCMCIA_SLOT_MSG
#endif
": ");
ide_init();
return 0;
} else if (strncmp(argv[1], "inf", 3) == 0) {
int i;
putc('\n');
for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) {
if (ide_dev_desc[i].type == DEV_TYPE_UNKNOWN)
continue; /* list only known devices */
printf("IDE device %d: ", i);
dev_print(&ide_dev_desc[i]);
}
return 0;
} else if (strncmp(argv[1], "dev", 3) == 0) {
if ((curr_device < 0)
|| (curr_device >= CONFIG_SYS_IDE_MAXDEVICE)) {
puts("\nno IDE devices available\n");
return 1;
}
printf("\nIDE device %d: ", curr_device);
dev_print(&ide_dev_desc[curr_device]);
return 0;
} else if (strncmp(argv[1], "part", 4) == 0) {
int dev, ok;
for (ok = 0, dev = 0;
dev < CONFIG_SYS_IDE_MAXDEVICE;
++dev) {
if (ide_dev_desc[dev].part_type !=
PART_TYPE_UNKNOWN) {
++ok;
if (dev)
putc('\n');
print_part(&ide_dev_desc[dev]);
}
}
if (!ok) {
puts("\nno IDE devices available\n");
rcode++;
}
return rcode;
}
return CMD_RET_USAGE;
case 3:
if (strncmp(argv[1], "dev", 3) == 0) {
int dev = (int) simple_strtoul(argv[2], NULL, 10);
printf("\nIDE device %d: ", dev);
if (dev >= CONFIG_SYS_IDE_MAXDEVICE) {
puts("unknown device\n");
return 1;
}
dev_print(&ide_dev_desc[dev]);
/*ide_print (dev); */
if (ide_dev_desc[dev].type == DEV_TYPE_UNKNOWN)
return 1;
curr_device = dev;
puts("... is now current device\n");
return 0;
} else if (strncmp(argv[1], "part", 4) == 0) {
int dev = (int) simple_strtoul(argv[2], NULL, 10);
if (ide_dev_desc[dev].part_type != PART_TYPE_UNKNOWN) {
print_part(&ide_dev_desc[dev]);
} else {
printf("\nIDE device %d not available\n",
dev);
rcode = 1;
}
return rcode;
}
return CMD_RET_USAGE;
default:
/* at least 4 args */
if (strcmp(argv[1], "read") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
#ifdef CONFIG_SYS_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf("\nIDE read: device %d block # %lld, count %ld ... ",
curr_device, blk, cnt);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf("\nIDE read: device %d block # %ld, count %ld ... ",
curr_device, blk, cnt);
#endif
n = ide_dev_desc[curr_device].block_read(curr_device,
blk, cnt,
(ulong *)addr);
/* flush cache after read */
flush_cache(addr,
cnt * ide_dev_desc[curr_device].blksz);
printf("%ld blocks read: %s\n",
n, (n == cnt) ? "OK" : "ERROR");
if (n == cnt)
return 0;
else
return 1;
} else if (strcmp(argv[1], "write") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
#ifdef CONFIG_SYS_64BIT_LBA
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
printf("\nIDE write: device %d block # %lld, count %ld ... ",
curr_device, blk, cnt);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf("\nIDE write: device %d block # %ld, count %ld ... ",
curr_device, blk, cnt);
#endif
n = ide_write(curr_device, blk, cnt, (ulong *) addr);
printf("%ld blocks written: %s\n",
n, (n == cnt) ? "OK" : "ERROR");
if (n == cnt)
return 0;
else
return 1;
} else {
return CMD_RET_USAGE;
}
return rcode;
}
}
int do_diskboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
return common_diskboot(cmdtp, "ide", argc, argv);
}
/* ------------------------------------------------------------------------- */
void __ide_led(uchar led, uchar status)
{
#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */
static uchar led_buffer; /* Buffer for current LED status */
uchar *led_port = LED_PORT;
if (status) /* switch LED on */
led_buffer |= led;
else /* switch LED off */
led_buffer &= ~led;
*led_port = led_buffer;
#endif
}
void ide_led(uchar led, uchar status)
__attribute__ ((weak, alias("__ide_led")));
#ifndef CONFIG_IDE_LED /* define LED macros, they are not used anyways */
# define DEVICE_LED(x) 0
# define LED_IDE1 1
# define LED_IDE2 2
#endif
/* ------------------------------------------------------------------------- */
inline void __ide_outb(int dev, int port, unsigned char val)
{
debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
dev, port, val,
(ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)));
#if defined(CONFIG_IDE_AHB)
if (port) {
/* write command */
ide_write_register(dev, port, val);
} else {
/* write data */
outb(val, (ATA_CURR_BASE(dev)));
}
#else
outb(val, (ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)));
#endif
}
void ide_outb(int dev, int port, unsigned char val)
__attribute__ ((weak, alias("__ide_outb")));
inline unsigned char __ide_inb(int dev, int port)
{
uchar val;
#if defined(CONFIG_IDE_AHB)
val = ide_read_register(dev, port);
#else
val = inb((ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)));
#endif
debug("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
dev, port,
(ATA_CURR_BASE(dev) + CONFIG_SYS_ATA_PORT_ADDR(port)), val);
return val;
}
unsigned char ide_inb(int dev, int port)
__attribute__ ((weak, alias("__ide_inb")));
#ifdef CONFIG_TUNE_PIO
inline int __ide_set_piomode(int pio_mode)
{
return 0;
}
inline int ide_set_piomode(int pio_mode)
__attribute__ ((weak, alias("__ide_set_piomode")));
#endif
void ide_init(void)
{
unsigned char c;
int i, bus;
#ifdef CONFIG_IDE_8xx_PCCARD
extern int ide_devices_found; /* Initialized in check_ide_device() */
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_IDE_PREINIT
WATCHDOG_RESET();
if (ide_preinit()) {
puts("ide_preinit failed\n");
return;
}
#endif /* CONFIG_IDE_PREINIT */
WATCHDOG_RESET();
/*
* Reset the IDE just to be sure.
* Light LED's to show
*/
ide_led((LED_IDE1 | LED_IDE2), 1); /* LED's on */
/* ATAPI Drives seems to need a proper IDE Reset */
ide_reset();
#ifdef CONFIG_IDE_INIT_POSTRESET
WATCHDOG_RESET();
if (ide_init_postreset()) {
puts("ide_preinit_postreset failed\n");
return;
}
#endif /* CONFIG_IDE_INIT_POSTRESET */
/*
* Wait for IDE to get ready.
* According to spec, this can take up to 31 seconds!
*/
for (bus = 0; bus < CONFIG_SYS_IDE_MAXBUS; ++bus) {
int dev =
bus * (CONFIG_SYS_IDE_MAXDEVICE /
CONFIG_SYS_IDE_MAXBUS);
#ifdef CONFIG_IDE_8xx_PCCARD
/* Skip non-ide devices from probing */
if ((ide_devices_found & (1 << bus)) == 0) {
ide_led((LED_IDE1 | LED_IDE2), 0); /* LED's off */
continue;
}
#endif
printf("Bus %d: ", bus);
ide_bus_ok[bus] = 0;
/* Select device
*/
udelay(100000); /* 100 ms */
ide_outb(dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev));
udelay(100000); /* 100 ms */
i = 0;
do {
udelay(10000); /* 10 ms */
c = ide_inb(dev, ATA_STATUS);
i++;
if (i > (ATA_RESET_TIME * 100)) {
puts("** Timeout **\n");
/* LED's off */
ide_led((LED_IDE1 | LED_IDE2), 0);
return;
}
if ((i >= 100) && ((i % 100) == 0))
putc('.');
} while (c & ATA_STAT_BUSY);
if (c & (ATA_STAT_BUSY | ATA_STAT_FAULT)) {
puts("not available ");
debug("Status = 0x%02X ", c);
#ifndef CONFIG_ATAPI /* ATAPI Devices do not set DRDY */
} else if ((c & ATA_STAT_READY) == 0) {
puts("not available ");
debug("Status = 0x%02X ", c);
#endif
} else {
puts("OK ");
ide_bus_ok[bus] = 1;
}
WATCHDOG_RESET();
}
putc('\n');
ide_led((LED_IDE1 | LED_IDE2), 0); /* LED's off */
curr_device = -1;
for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) {
int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
ide_dev_desc[i].if_type = IF_TYPE_IDE;
ide_dev_desc[i].dev = i;
ide_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
ide_dev_desc[i].blksz = 0;
ide_dev_desc[i].log2blksz =
LOG2_INVALID(typeof(ide_dev_desc[i].log2blksz));
ide_dev_desc[i].lba = 0;
ide_dev_desc[i].block_read = ide_read;
ide_dev_desc[i].block_write = ide_write;
if (!ide_bus_ok[IDE_BUS(i)])
continue;
ide_led(led, 1); /* LED on */
ide_ident(&ide_dev_desc[i]);
ide_led(led, 0); /* LED off */
dev_print(&ide_dev_desc[i]);
if ((ide_dev_desc[i].lba > 0) && (ide_dev_desc[i].blksz > 0)) {
/* initialize partition type */
init_part(&ide_dev_desc[i]);
if (curr_device < 0)
curr_device = i;
}
}
WATCHDOG_RESET();
}
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_PARTITIONS
block_dev_desc_t *ide_get_dev(int dev)
{
return (dev < CONFIG_SYS_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL;
}
#endif
/* ------------------------------------------------------------------------- */
void ide_input_swap_data(int dev, ulong *sect_buf, int words)
__attribute__ ((weak, alias("__ide_input_swap_data")));
void ide_input_data(int dev, ulong *sect_buf, int words)
__attribute__ ((weak, alias("__ide_input_data")));
void ide_output_data(int dev, const ulong *sect_buf, int words)
__attribute__ ((weak, alias("__ide_output_data")));
/* We only need to swap data if we are running on a big endian cpu. */
#if defined(__LITTLE_ENDIAN)
void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
ide_input_data(dev, sect_buf, words);
}
#else
void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
volatile ushort *pbuf =
(ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
ushort *dbuf = (ushort *) sect_buf;
debug("in input swap data base for read is %lx\n",
(unsigned long) pbuf);
while (words--) {
#ifdef __MIPS__
*dbuf++ = swab16p((u16 *) pbuf);
*dbuf++ = swab16p((u16 *) pbuf);
#else
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
#endif /* !MIPS */
}
}
#endif /* __LITTLE_ENDIAN */
#if defined(CONFIG_IDE_SWAP_IO)
void __ide_output_data(int dev, const ulong *sect_buf, int words)
{
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
dbuf = (ushort *) sect_buf;
while (words--) {
EIEIO;
*pbuf = *dbuf++;
EIEIO;
*pbuf = *dbuf++;
}
}
#else /* ! CONFIG_IDE_SWAP_IO */
void __ide_output_data(int dev, const ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_write_data(dev, sect_buf, words);
#else
outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, words << 1);
#endif
}
#endif /* CONFIG_IDE_SWAP_IO */
#if defined(CONFIG_IDE_SWAP_IO)
void __ide_input_data(int dev, ulong *sect_buf, int words)
{
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
dbuf = (ushort *) sect_buf;
debug("in input data base for read is %lx\n", (unsigned long) pbuf);
while (words--) {
EIEIO;
*dbuf++ = *pbuf;
EIEIO;
*dbuf++ = *pbuf;
}
}
#else /* ! CONFIG_IDE_SWAP_IO */
void __ide_input_data(int dev, ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_read_data(dev, sect_buf, words);
#else
insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, words << 1);
#endif
}
#endif /* CONFIG_IDE_SWAP_IO */
/* -------------------------------------------------------------------------
*/
static void ide_ident(block_dev_desc_t *dev_desc)
{
unsigned char c;
hd_driveid_t iop;
#ifdef CONFIG_ATAPI
int retries = 0;
#endif
#ifdef CONFIG_TUNE_PIO
int pio_mode;
#endif
#if 0
int mode, cycle_time;
#endif
int device;
device = dev_desc->dev;
printf(" Device %d: ", device);
ide_led(DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
dev_desc->if_type = IF_TYPE_IDE;
#ifdef CONFIG_ATAPI
retries = 0;
/* Warning: This will be tricky to read */
while (retries <= 1) {
/* check signature */
if ((ide_inb(device, ATA_SECT_CNT) == 0x01) &&
(ide_inb(device, ATA_SECT_NUM) == 0x01) &&
(ide_inb(device, ATA_CYL_LOW) == 0x14) &&
(ide_inb(device, ATA_CYL_HIGH) == 0xEB)) {
/* ATAPI Signature found */
dev_desc->if_type = IF_TYPE_ATAPI;
/*
* Start Ident Command
*/
ide_outb(device, ATA_COMMAND, ATAPI_CMD_IDENT);
/*
* Wait for completion - ATAPI devices need more time
* to become ready
*/
c = ide_wait(device, ATAPI_TIME_OUT);
} else
#endif
{
/*
* Start Ident Command
*/
ide_outb(device, ATA_COMMAND, ATA_CMD_IDENT);
/*
* Wait for completion
*/
c = ide_wait(device, IDE_TIME_OUT);
}
ide_led(DEVICE_LED(device), 0); /* LED off */
if (((c & ATA_STAT_DRQ) == 0) ||
((c & (ATA_STAT_FAULT | ATA_STAT_ERR)) != 0)) {
#ifdef CONFIG_ATAPI
{
/*
* Need to soft reset the device
* in case it's an ATAPI...
*/
debug("Retrying...\n");
ide_outb(device, ATA_DEV_HD,
ATA_LBA | ATA_DEVICE(device));
udelay(100000);
ide_outb(device, ATA_COMMAND, 0x08);
udelay(500000); /* 500 ms */
}
/*
* Select device
*/
ide_outb(device, ATA_DEV_HD,
ATA_LBA | ATA_DEVICE(device));
retries++;
#else
return;
#endif
}
#ifdef CONFIG_ATAPI
else
break;
} /* see above - ugly to read */
if (retries == 2) /* Not found */
return;
#endif
ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev,
sizeof(dev_desc->revision));
ident_cpy((unsigned char *) dev_desc->vendor, iop.model,
sizeof(dev_desc->vendor));
ident_cpy((unsigned char *) dev_desc->product, iop.serial_no,
sizeof(dev_desc->product));
#ifdef __LITTLE_ENDIAN
/*
* firmware revision, model, and serial number have Big Endian Byte
* order in Word. Convert all three to little endian.
*
* See CF+ and CompactFlash Specification Revision 2.0:
* 6.2.1.6: Identify Drive, Table 39 for more details
*/
strswab(dev_desc->revision);
strswab(dev_desc->vendor);
strswab(dev_desc->product);
#endif /* __LITTLE_ENDIAN */
if ((iop.config & 0x0080) == 0x0080)
dev_desc->removable = 1;
else
dev_desc->removable = 0;
#ifdef CONFIG_TUNE_PIO
/* Mode 0 - 2 only, are directly determined by word 51. */
pio_mode = iop.tPIO;
if (pio_mode > 2) {
printf("WARNING: Invalid PIO (word 51 = %d).\n", pio_mode);
/* Force it to dead slow, and hope for the best... */
pio_mode = 0;
}
/* Any CompactFlash Storage Card that supports PIO mode 3 or above
* shall set bit 1 of word 53 to one and support the fields contained
* in words 64 through 70.
*/
if (iop.field_valid & 0x02) {
/*
* Mode 3 and above are possible. Check in order from slow
* to fast, so we wind up with the highest mode allowed.
*/
if (iop.eide_pio_modes & 0x01)
pio_mode = 3;
if (iop.eide_pio_modes & 0x02)
pio_mode = 4;
if (ata_id_is_cfa((u16 *)&iop)) {
if ((iop.cf_advanced_caps & 0x07) == 0x01)
pio_mode = 5;
if ((iop.cf_advanced_caps & 0x07) == 0x02)
pio_mode = 6;
}
}
/* System-specific, depends on bus speeds, etc. */
ide_set_piomode(pio_mode);
#endif /* CONFIG_TUNE_PIO */
#if 0
/*
* Drive PIO mode autoselection
*/
mode = iop.tPIO;
printf("tPIO = 0x%02x = %d\n", mode, mode);
if (mode > 2) { /* 2 is maximum allowed tPIO value */
mode = 2;
debug("Override tPIO -> 2\n");
}
if (iop.field_valid & 2) { /* drive implements ATA2? */
debug("Drive implements ATA2\n");
if (iop.capability & 8) { /* drive supports use_iordy? */
cycle_time = iop.eide_pio_iordy;
} else {
cycle_time = iop.eide_pio;
}
debug("cycle time = %d\n", cycle_time);
mode = 4;
if (cycle_time > 120)
mode = 3; /* 120 ns for PIO mode 4 */
if (cycle_time > 180)
mode = 2; /* 180 ns for PIO mode 3 */
if (cycle_time > 240)
mode = 1; /* 240 ns for PIO mode 4 */
if (cycle_time > 383)
mode = 0; /* 383 ns for PIO mode 4 */
}
printf("PIO mode to use: PIO %d\n", mode);
#endif /* 0 */
#ifdef CONFIG_ATAPI
if (dev_desc->if_type == IF_TYPE_ATAPI) {
atapi_inquiry(dev_desc);
return;
}
#endif /* CONFIG_ATAPI */
#ifdef __BIG_ENDIAN
/* swap shorts */
dev_desc->lba = (iop.lba_capacity << 16) | (iop.lba_capacity >> 16);
#else /* ! __BIG_ENDIAN */
/*
* do not swap shorts on little endian
*
* See CF+ and CompactFlash Specification Revision 2.0:
* 6.2.1.6: Identfy Drive, Table 39, Word Address 57-58 for details.
*/
dev_desc->lba = iop.lba_capacity;
#endif /* __BIG_ENDIAN */
#ifdef CONFIG_LBA48
if (iop.command_set_2 & 0x0400) { /* LBA 48 support */
dev_desc->lba48 = 1;
dev_desc->lba = (unsigned long long) iop.lba48_capacity[0] |
((unsigned long long) iop.lba48_capacity[1] << 16) |
((unsigned long long) iop.lba48_capacity[2] << 32) |
((unsigned long long) iop.lba48_capacity[3] << 48);
} else {
dev_desc->lba48 = 0;
}
#endif /* CONFIG_LBA48 */
/* assuming HD */
dev_desc->type = DEV_TYPE_HARDDISK;
dev_desc->blksz = ATA_BLOCKSIZE;
dev_desc->log2blksz = LOG2(dev_desc->blksz);
dev_desc->lun = 0; /* just to fill something in... */
#if 0 /* only used to test the powersaving mode,
* if enabled, the drive goes after 5 sec
* in standby mode */
ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = ide_wait(device, IDE_TIME_OUT);
ide_outb(device, ATA_SECT_CNT, 1);
ide_outb(device, ATA_LBA_LOW, 0);
ide_outb(device, ATA_LBA_MID, 0);
ide_outb(device, ATA_LBA_HIGH, 0);
ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
ide_outb(device, ATA_COMMAND, 0xe3);
udelay(50);
c = ide_wait(device, IDE_TIME_OUT); /* can't take over 500 ms */
#endif
}
/* ------------------------------------------------------------------------- */
ulong ide_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer)
{
ulong n = 0;
unsigned char c;
unsigned char pwrsave = 0; /* power save */
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000ULL) {
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
device, blknr, blkcnt, (ulong) buffer);
ide_led(DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = ide_wait(device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
printf("IDE read: device %d not ready\n", device);
goto IDE_READ_E;
}
/* first check if the drive is in Powersaving mode, if yes,
* increase the timeout value */
ide_outb(device, ATA_COMMAND, ATA_CMD_CHK_PWR);
udelay(50);
c = ide_wait(device, IDE_TIME_OUT); /* can't take over 500 ms */
if (c & ATA_STAT_BUSY) {
printf("IDE read: device %d not ready\n", device);
goto IDE_READ_E;
}
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
printf("No Powersaving mode %X\n", c);
} else {
c = ide_inb(device, ATA_SECT_CNT);
debug("Powersaving %02X\n", c);
if (c == 0)
pwrsave = 1;
}
while (blkcnt-- > 0) {
c = ide_wait(device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
printf("IDE read: device %d not ready\n", device);
break;
}
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb(device, ATA_SECT_CNT, 0);
ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
#ifdef CONFIG_SYS_64BIT_LBA
ide_outb(device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb(device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
#else
ide_outb(device, ATA_LBA_MID, 0);
ide_outb(device, ATA_LBA_HIGH, 0);
#endif
}
#endif
ide_outb(device, ATA_SECT_CNT, 1);
ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
#ifdef CONFIG_LBA48
if (lba48) {
ide_outb(device, ATA_DEV_HD,
ATA_LBA | ATA_DEVICE(device));
ide_outb(device, ATA_COMMAND, ATA_CMD_READ_EXT);
} else
#endif
{
ide_outb(device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) | ((blknr >> 24) & 0xF));
ide_outb(device, ATA_COMMAND, ATA_CMD_READ);
}
udelay(50);
if (pwrsave) {
/* may take up to 4 sec */
c = ide_wait(device, IDE_SPIN_UP_TIME_OUT);
pwrsave = 0;
} else {
/* can't take over 500 ms */
c = ide_wait(device, IDE_TIME_OUT);
}
if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
ATA_STAT_DRQ) {
printf("Error (no IRQ) dev %d blk " LBAF ": status "
"%#02x\n", device, blknr, c);
break;
}
ide_input_data(device, buffer, ATA_SECTORWORDS);
(void) ide_inb(device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
buffer += ATA_BLOCKSIZE;
}
IDE_READ_E:
ide_led(DEVICE_LED(device), 0); /* LED off */
return (n);
}
/* ------------------------------------------------------------------------- */
ulong ide_write(int device, lbaint_t blknr, lbaint_t blkcnt, const void *buffer)
{
ulong n = 0;
unsigned char c;
#ifdef CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000ULL) {
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
ide_led(DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
while (blkcnt-- > 0) {
c = ide_wait(device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
printf("IDE read: device %d not ready\n", device);
goto WR_OUT;
}
#ifdef CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb(device, ATA_SECT_CNT, 0);
ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
#ifdef CONFIG_SYS_64BIT_LBA
ide_outb(device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb(device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
#else
ide_outb(device, ATA_LBA_MID, 0);
ide_outb(device, ATA_LBA_HIGH, 0);
#endif
}
#endif
ide_outb(device, ATA_SECT_CNT, 1);
ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);