This firmware is highly experimental and is not in a usable state right now, however contributions and testing are welcome and accepted.
To build and install the firmware, first clone this repository:
git clone https://github.com/n1zzo/OpenDMR
To build the firmware you need to have a toolchain for the ARM ISA installed on you system, you can install one using your package manager. You can then proceed in building the firmware:
cd OpenDMR
make
If everithing compiled without errors you can connect your radio via USB, put it in recovery mode (by powering it on with the PTT and the button above it pressed), and flash the firmware:
make flash
Now you can power cycle your radio and enjoy the new breath of freedom!
This software is released under the GNU GPL v3, the modified wrapping scripts from Travis Goodspeed are licensed in exchange of two liters of India Pale Ale, we still owe you the two liters, Travis!
OpenDMR was created by:
- Niccolò Izzo IU2KIN n@izzo.sh
- Silvano Seva IU2KWO silseva@fastwebnet.it
All this was made possible by the huge reverse engineering effort of Travis Goodspeed and all the contributors of md380tools. A huge thank goes to Roger Clark, and his OpenGD77 which inspired this project, and which we aspire becoming a part of.