RTK5RX65Ndemo08

RTK65RX65Ndemo08:

This demo is inspired by the function of the yellow communication LED in a Modbus-RTU slave, that blinks shortly at receiving a message and longer when the slave responds to a message from the Modbus-master. For the demo a short key-press on SW1, less than a second, will be used for reception, and 1 second or more for responding with a long blink.

functionality: LED1 initially off, poll SW1

• HOCO clock 16 MHz, PLL / 1 * 15 = 240 MHz
• ICLK / 2 = 120 MHz, PCLKB / 4 = 60 MHz
• main(): poll SW1 every 0,1s
• release after press blinks LED1: long or short

create the project as a C++-project with GCC:

make the HardwareDebug settings:

Debug/Run:

take a look at readme.md of RTK5RX65Ndemo07 or see GCC_e2studio_RX65N.md

taking over code from RTK65RX65Ndemo04 and demo07:

• rename RTK65RX65Ndemo08.cpp to main.cpp.
• copy contents of main.cpp from demo07 into this projects main.cpp.
• take hardware_setup() and the Arduino-style functions from demo04.
• make some more changes to arrive at the main.cpp aas inside this project.
• change inthandler.c by commenting out vector 149 (line 381) to //void INT_Excep_PERIB_INTB149(void){ }.

result:

• prog: 3340
• constant: 1212
• data: 4
• bss: 18
• other: 28