modbus_sungrow.yaml

# Home Assistant Sungrow inverter integration
# https://github.com/mkaiser/Sungrow-SHx-Inverter-Modbus-Home-Assistant
# by Martin Kaiser
#
# last update: 2025-02-07
#
# Note: This YAML file will only work with Home Assistant >= 2024.10

modbus:
  - name: SungrowSHx
    type: tcp
    host: !secret sungrow_modbus_host_ip
    port: !secret sungrow_modbus_port
    delay: 5
    timeout: 10

    sensors:
      - name: Sungrow inverter serial
        unique_id: sg_inverter_serial
        device_address: !secret sungrow_modbus_slave
        address: 4989 # reg 4990
        input_type: input
        data_type: string
        count: 10
        scan_interval: 600

      # for Sungrow batteries only
      #      - name: Sungrow battery serial
      #        unique_id: sg_battery_serial
      #        device_address: !secret sbr_modbus_slave # Usually 200, only modbus-port, not via Winet-S
      #        address: 10710 # reg 10711
      #        input_type: input
      #        data_type: string
      #        count: 10
      #        scan_interval: 86400

      - name: Sungrow device type code
        unique_id: sg_dev_code
        device_address: !secret sungrow_modbus_slave
        address: 4999 # reg 5000
        input_type: input
        data_type: uint16
        scan_interval: 600

      - name: Daily PV generation & battery discharge
        unique_id: sg_daily_pv_gen_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 5002 # reg 5003
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total PV generation & battery discharge
        unique_id: sg_total_pv_gen_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 5003 # reg 5004
        input_type: input
        data_type: uint32
        swap: word
        unit_of_measurement: kWh
        precision: 1
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Inverter temperature
        unique_id: sg_inverter_temperature
        device_address: !secret sungrow_modbus_slave
        address: 5007 # reg 5008
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: °C
        device_class: Temperature
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT1 voltage
        unique_id: sg_mppt1_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5010 # reg 5011
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT1 current
        unique_id: sg_mppt1_current
        device_address: !secret sungrow_modbus_slave
        address: 5011 # reg 5012
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT2 voltage
        unique_id: sg_mppt2_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5012 # reg 5013
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: MPPT2 current
        unique_id: sg_mppt2_current
        device_address: !secret sungrow_modbus_slave
        address: 5013 # reg 5014
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Total DC power
        unique_id: sg_total_dc_power
        device_address: !secret sungrow_modbus_slave
        address: 5016 # reg 5017
        input_type: input
        data_type: uint32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Phase A voltage
        unique_id: sg_phase_a_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5018 # reg: 5019
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase B voltage
        unique_id: sg_phase_b_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5019 # reg: 5020
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase C voltage
        unique_id: sg_phase_c_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5020 # reg: 5021
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Reactive power
        unique_id: sg_reactive_power
        device_address: !secret sungrow_modbus_slave
        address: 5032 # reg 5033
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Power factor
        unique_id: sg_power_factor
        device_address: !secret sungrow_modbus_slave
        address: 5034 # reg 5035
        input_type: input
        data_type: int16
        precision: 3
        unit_of_measurement: "%"
        device_class: power_factor
        state_class: measurement
        scale: 0.001
        scan_interval: 10

      - name: Grid frequency
        unique_id: sg_grid_frequency
        device_address: !secret sungrow_modbus_slave
        address: 5241 # reg 5242
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: "Hz"
        device_class: frequency
        state_class: measurement
        scale: 0.01
        scan_interval: 10

      #https://www.photovoltaikforum.com/thread/166134-daten-lesen-vom-sungrow-wechselrichtern-modbus/?pageNo=13
      #Meter Active Power: 5601-5602 S32 W (Energiezähler Wirkleistung)
      #Meter Phase A Active Power: 5603-5604 S32 W (Stromzähler Phase A Wirkleistung)
      #Meter Phase B Active Power: 5605-5606 S32 W (Stromzähler Phase B Wirkleistung)
      #Meter Phase C Active Power: 5607-5608 S32 W (Stromzähler Phase C Wirkleistung)
      - name: Meter active power raw
        unique_id: sg_meter_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5600 # reg 5601
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Meter phase A active power raw
        unique_id: sg_meter_phase_a_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5602 # reg 5603
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Meter phase B active power raw
        unique_id: sg_meter_phase_b_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5604 # reg 5605
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Meter phase C active power raw
        unique_id: sg_meter_phase_c_active_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 5606 # reg 5607
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: BDC rated power
        unique_id: sg_bdc_rated_power
        device_address: !secret sungrow_modbus_slave
        address: 5627 # reg 5628
        input_type: input
        data_type: uint16
        unit_of_measurement: "W"
        device_class: power
        state_class: measurement
        scale: 100
        scan_interval: 600

      - name: BMS max. charging current
        unique_id: sg_bms_max_charging_current
        device_address: !secret sungrow_modbus_slave
        address: 5634 # reg 5635
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 1
        scan_interval: 60

      - name: BMS max. discharging current
        unique_id: sg_bms_max_discharging_current
        device_address: !secret sungrow_modbus_slave
        address: 5635 # reg 5636
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: A
        device_class: Current
        state_class: measurement
        scale: 1
        scan_interval: 60

      - name: Battery capacity # as in TI_20240924_Communication Protocol of Residential Hybrid Inverter-V1.1.5
        unique_id: sg_battery_capacity
        device_address: !secret sungrow_modbus_slave
        address: 5638 # reg 5639
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: kWh
        device_class: energy_storage
        scale: 0.01
        scan_interval: 600

      #https://www.photovoltaikforum.com/thread/166134-daten-lesen-vom-sungrow-wechselrichtern-modbus/?pageNo=13
      #Phase A Backup Power: 5723 S16 W (Backup Leistung Phase A)
      #Phase B Backup Power: 5724 S16 W (Backup Leistung Phase B)
      #Phase C Backup Power: 5725 S16 W (Backup Leistung Phase C)
      - name: Total backup power
        device_address: !secret sungrow_modbus_slave
        unique_id: sg_total_backup_power
        address: 5725 # reg 5726
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Backup phase A power
        unique_id: sg_backup_phase_a_power
        device_address: !secret sungrow_modbus_slave
        address: 5722 # reg 5723
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Backup phase B power
        unique_id: sg_backup_phase_b_power
        device_address: !secret sungrow_modbus_slave
        address: 5723 # reg 5724
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Backup phase C power
        unique_id: sg_backup_phase_c_power
        device_address: !secret sungrow_modbus_slave
        address: 5724 # reg 5725
        input_type: input
        data_type: int16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      # https://www.photovoltaikforum.com/thread/166134-daten-lesen-vom-sungrow-wechselrichtern-modbus/?postID=3324464#post3324464
      - name: Meter phase A voltage
        unique_id: sg_meter_phase_a_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5740 # reg 5741
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: V
        device_class: voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Meter phase B voltage
        unique_id: sg_meter_phase_b_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5741 # reg 5742
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: V
        device_class: voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Meter phase C voltage
        unique_id: sg_meter_phase_c_voltage
        device_address: !secret sungrow_modbus_slave
        address: 5742 # reg 5743
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: V
        device_class: voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Meter phase A current
        unique_id: sg_meter_phase_a_current
        device_address: !secret sungrow_modbus_slave
        address: 5743 # reg 5744
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.01
        scan_interval: 10

      - name: Meter phase B current
        unique_id: sg_meter_phase_b_current
        device_address: !secret sungrow_modbus_slave
        address: 5744 # reg 5745
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.01
        scan_interval: 10

      - name: Meter phase C current
        unique_id: sg_meter_phase_c_current
        device_address: !secret sungrow_modbus_slave
        address: 5745 # reg 5746
        input_type: input
        data_type: uint16
        precision: 2
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.01
        scan_interval: 10

      # Start monthly PV generation
      - name: Monthly PV generation (01 January)
        unique_id: sg_monthly_pv_generation_01_january
        device_address: !secret sungrow_modbus_slave
        address: 6226 # reg 6227
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (02 February)
        unique_id: sg_monthly_pv_generation_02_february
        device_address: !secret sungrow_modbus_slave
        address: 6227 # reg 6228
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (03 March)
        unique_id: sg_monthly_pv_generation_03_march
        device_address: !secret sungrow_modbus_slave
        address: 6228 # reg 6229
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (04 April)
        unique_id: sg_monthly_pv_generation_04_april
        device_address: !secret sungrow_modbus_slave
        address: 6229 # reg 6230
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (05 May)
        unique_id: sg_monthly_pv_generation_05_may
        device_address: !secret sungrow_modbus_slave
        address: 6230 # reg 6231
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (06 June)
        unique_id: sg_monthly_pv_generation_06_june
        device_address: !secret sungrow_modbus_slave
        address: 6231 # reg 6232
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (07 July)
        unique_id: sg_monthly_pv_generation_07_july
        device_address: !secret sungrow_modbus_slave
        address: 6232 # reg 6233
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (08 August)
        unique_id: sg_monthly_pv_generation_08_august
        device_address: !secret sungrow_modbus_slave
        address: 6233 # reg 6234
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (09 September)
        unique_id: sg_monthly_pv_generation_09_september
        device_address: !secret sungrow_modbus_slave
        address: 6234 # reg 6235
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (10 October)
        unique_id: sg_monthly_pv_generation_10_october
        device_address: !secret sungrow_modbus_slave
        address: 6235 # reg 6236
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (11 November)
        unique_id: sg_monthly_pv_generation_11_november
        device_address: !secret sungrow_modbus_slave
        address: 6236 # reg 6237
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly PV generation (12 December)
        unique_id: sg_monthly_pv_generation_12_december
        device_address: !secret sungrow_modbus_slave
        address: 6237 # reg 6238
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600
      # End monthly PV generation

      # Start yearly pv generation
      - name: Yearly PV generation (2019)
        unique_id: sg_yearly_pv_generation_2019
        device_address: !secret sungrow_modbus_slave
        address: 6257 # reg 6258
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2020)
        unique_id: sg_yearly_pv_generation_2020
        device_address: !secret sungrow_modbus_slave
        address: 6259 # reg 6260
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2021)
        unique_id: sg_yearly_pv_generation_2021
        device_address: !secret sungrow_modbus_slave
        address: 6261 # reg 6262
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2022)
        unique_id: sg_yearly_pv_generation_2022
        device_address: !secret sungrow_modbus_slave
        address: 6263 # reg 6264
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2023)
        unique_id: sg_yearly_pv_generation_2023
        device_address: !secret sungrow_modbus_slave
        address: 6265 # reg 6266
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2024)
        unique_id: sg_yearly_pv_generation_2024
        device_address: !secret sungrow_modbus_slave
        address: 6267 # reg 6268
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2025)
        unique_id: sg_yearly_pv_generation_2025
        device_address: !secret sungrow_modbus_slave
        address: 6269 # reg 6270
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2026)
        unique_id: sg_yearly_pv_generation_2026
        device_address: !secret sungrow_modbus_slave
        address: 6271 # reg 6272
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2027)
        unique_id: sg_yearly_pv_generation_2027
        device_address: !secret sungrow_modbus_slave
        address: 6273 # reg 6274
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2028)
        unique_id: sg_yearly_pv_generation_2028
        device_address: !secret sungrow_modbus_slave
        address: 6275 # reg 6276
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Yearly PV generation (2029)
        unique_id: sg_yearly_pv_generation_2029
        device_address: !secret sungrow_modbus_slave
        address: 6277 # reg 6278
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600
      # End yearly pv generation

      # Start monthly export
      - name: Monthly export (01 January)
        unique_id: sg_monthly_export_01_january
        device_address: !secret sungrow_modbus_slave
        address: 6595 # reg 6596
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (02 February)
        unique_id: sg_monthly_export_02_february
        device_address: !secret sungrow_modbus_slave
        address: 6596 # reg 6597
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (03 March)
        unique_id: sg_monthly_export_03_march
        device_address: !secret sungrow_modbus_slave
        address: 6597 # reg 6598
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (04 April)
        unique_id: sg_monthly_export_04_april
        device_address: !secret sungrow_modbus_slave
        address: 6598 # reg 6599
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (05 May)
        unique_id: sg_monthly_export_05_may
        device_address: !secret sungrow_modbus_slave
        address: 6599 # reg 6600
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (06 June)
        unique_id: sg_monthly_export_06_june
        device_address: !secret sungrow_modbus_slave
        address: 6600 # reg 6601
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (07 July)
        unique_id: sg_monthly_export_07_july
        device_address: !secret sungrow_modbus_slave
        address: 6601 # reg 6602
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (08 August)
        unique_id: sg_monthly_export_08_august
        device_address: !secret sungrow_modbus_slave
        address: 6602 # reg 6603
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (09 September)
        unique_id: sg_monthly_export_09_september
        device_address: !secret sungrow_modbus_slave
        address: 6603 # reg 6604
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (10 October)
        unique_id: sg_monthly_export_10_october
        device_address: !secret sungrow_modbus_slave
        address: 6604 # reg 6605
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (11 November)
        unique_id: sg_monthly_export_11_november
        device_address: !secret sungrow_modbus_slave
        address: 6605 # reg 6606
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Monthly export (12 December)
        unique_id: sg_monthly_export_12_december
        device_address: !secret sungrow_modbus_slave
        address: 6606 # reg 6607
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600
      # End monthly export

      # Start yearly export energy from PV
      - name: Yearly Export (2019)
        unique_id: sg_yearly_export_2019
        device_address: !secret sungrow_modbus_slave
        address: 6615 # reg 6616
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2020)
        unique_id: sg_yearly_export_2020
        device_address: !secret sungrow_modbus_slave
        address: 6617 # reg 6618
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2021)
        unique_id: sg_yearly_export_2021
        device_address: !secret sungrow_modbus_slave
        address: 6619 # reg 6620
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2022)
        unique_id: sg_yearly_export_2022
        device_address: !secret sungrow_modbus_slave
        address: 6621 # reg 6622
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2023)
        unique_id: sg_yearly_export_2023
        device_address: !secret sungrow_modbus_slave
        address: 6623 # reg 6624
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2024)
        unique_id: sg_yearly_export_2024
        device_address: !secret sungrow_modbus_slave
        address: 6625 # reg 6626
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2025)
        unique_id: sg_yearly_export_2025
        device_address: !secret sungrow_modbus_slave
        address: 6627 # reg 6628
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2026)
        unique_id: sg_yearly_export_2026
        device_address: !secret sungrow_modbus_slave
        address: 6629 # reg 6630
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2027)
        unique_id: sg_yearly_export_2027
        device_address: !secret sungrow_modbus_slave
        address: 6631 # reg 6632
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Yearly Export (2028)
        unique_id: sg_yearly_export_2028
        device_address: !secret sungrow_modbus_slave
        address: 6633 # reg 6634
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600
      # End yearly export energy from PV

      - name: System state
        unique_id: sg_system_state
        device_address: !secret sungrow_modbus_slave
        address: 12999 # reg 13000
        input_type: input
        data_type: uint16
        precision: 0
        scale: 1
        state_class: measurement
        scan_interval: 10

      # register running state is not available for certain SH*RS inverters
      # template sensors are used to determine the states based on other sensors
      - name: Running state
        unique_id: sg_running_state
        device_address: !secret sungrow_modbus_slave
        address: 13000 # reg 13001
        input_type: input
        data_type: uint16
        precision: 0
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Daily PV generation
        unique_id: sg_daily_pv_generation
        device_address: !secret sungrow_modbus_slave
        address: 13001 # reg 13002
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total PV generation
        unique_id: sg_total_pv_generation
        device_address: !secret sungrow_modbus_slave
        address: 13002 # reg 13003
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily exported energy from PV
        unique_id: sg_daily_exported_energy_from_PV
        device_address: !secret sungrow_modbus_slave
        address: 13004 # reg 13005
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total exported energy from PV
        unique_id: sg_total_exported_energy_from_pv
        device_address: !secret sungrow_modbus_slave
        address: 13005 # reg 13006
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Load power
        unique_id: sg_load_power
        device_address: !secret sungrow_modbus_slave
        address: 13007 # reg 13008
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      # this value returns a positive value when exporting and a negative value when importing power
      - name: Export power raw
        unique_id: sg_battery_export_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 13009 # reg 13010
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Daily battery charge from PV
        unique_id: sg_daily_battery_charge_from_pv
        device_address: !secret sungrow_modbus_slave
        address: 13011 # reg 13012
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total battery charge from PV
        unique_id: sg_total_battery_charge_from_pv
        device_address: !secret sungrow_modbus_slave
        address: 13012 # reg 13013
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily direct energy consumption
        unique_id: sg_daily_direct_energy_consumption
        device_address: !secret sungrow_modbus_slave
        address: 13016 # reg 13017
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total direct energy consumption
        unique_id: sg_total_direct_energy_consumption
        device_address: !secret sungrow_modbus_slave
        address: 13017 # reg 13018
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Battery voltage
        unique_id: sg_battery_voltage
        device_address: !secret sungrow_modbus_slave
        address: 13019 # reg 13020
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: V
        device_class: Voltage
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      # note: datasheet states that this value is unsigned, but it is acually signed:
      # https://github.com/mkaiser/Sungrow-SHx-Inverter-Modbus-Home-Assistant/issues/304
      - name: Battery current
        unique_id: sg_battery_current
        device_address: !secret sungrow_modbus_slave
        address: 13020 # reg 13021
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        state_class: measurement
        device_class: Current
        scale: 0.1
        scan_interval: 10

      # old firmware ( before october 2024): always positive battery power
      # use binary_sensor.battery_charging | discharging to retrieve the direction of the energy flow
      # new firmware: positive if charging and negative if discharging
      # with new firmware installed we could use this raw value directly as signed battery power
      # to support both firmwares we use the template sensor "signed battery power"
      - name: Battery power raw
        unique_id: sg_battery_power_raw
        device_address: !secret sungrow_modbus_slave
        address: 13021 # reg 13022
        input_type: input
        data_type: int16 #updated to signed int, see issue #406
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      # 0..100%  |  min_soc..max_soc
      - name: Battery level
        unique_id: sg_battery_level
        device_address: !secret sungrow_modbus_slave
        address: 13022 # reg 13023
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 0.1
        scan_interval: 60

      # 0..100% calculated internally by the BMS load balancing
      - name: Battery state of health
        unique_id: sg_battery_state_of_health
        device_address: !secret sungrow_modbus_slave
        address: 13023 # reg 13024
        input_type: input
        data_type: uint16
        precision: 0
        unit_of_measurement: "%"
        state_class: measurement
        scale: 0.1
        scan_interval: 600

      - name: Battery temperature
        unique_id: sg_battery_temperature
        device_address: !secret sungrow_modbus_slave
        address: 13024 # reg 13025
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: °C
        device_class: Temperature
        state_class: measurement
        scale: 0.1
        scan_interval: 60

      - name: Daily battery discharge
        unique_id: sg_daily_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 13025 # reg 13026
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total battery discharge
        unique_id: sg_total_battery_discharge
        device_address: !secret sungrow_modbus_slave
        address: 13026 # reg 13027
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Phase A current
        unique_id: sg_phase_a_current
        device_address: !secret sungrow_modbus_slave
        address: 13030 # reg 13031
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase B current
        unique_id: sg_phase_b_current
        device_address: !secret sungrow_modbus_slave
        address: 13031 # reg 13032
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Phase C current
        unique_id: sg_phase_c_current
        device_address: !secret sungrow_modbus_slave
        address: 13032 # reg 13033
        input_type: input
        data_type: int16
        precision: 1
        unit_of_measurement: A
        device_class: current
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Total active power
        unique_id: sg_total_active_power
        device_address: !secret sungrow_modbus_slave
        address: 13033 # reg 13034
        input_type: input
        data_type: int32
        swap: word
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Daily imported energy
        unique_id: sg_daily_imported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13035 # reg 13036
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total imported energy
        unique_id: sg_total_imported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13036 # reg 13037
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily battery charge
        unique_id: sg_daily_battery_charge
        device_address: !secret sungrow_modbus_slave
        address: 13039 # reg 13040
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total battery charge
        unique_id: sg_total_battery_charge
        device_address: !secret sungrow_modbus_slave
        address: 13040 # reg 13041
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      - name: Daily exported energy
        unique_id: sg_daily_exported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13044 # reg 13045
        input_type: input
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        scale: 0.1
        scan_interval: 600

      - name: Total exported energy
        unique_id: sg_total_exported_energy
        device_address: !secret sungrow_modbus_slave
        address: 13045 # reg 13046
        input_type: input
        data_type: uint32
        swap: word
        precision: 1
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        scale: 0.1
        scan_interval: 600

      #####################
      # holding registers
      #####################
      # mkaiser 2025-01-12 this is already included as a sensor "System state"
      # - name: Inverter start stop
      #   unique_id: sg_inverter_start_stop
      #   device_address: !secret sungrow_modbus_slave
      #   address: 12999 # reg 13000
      #   input_type: holding
      #   data_type: uint16
      #   precision: 0
      #   state_class: measurement
      #   scan_interval: 10

      - name: EMS mode selection raw
        unique_id: sg_ems_mode_selection_raw
        device_address: !secret sungrow_modbus_slave
        address: 13049 # reg 13050
        input_type: holding
        data_type: uint16
        state_class: measurement
        scan_interval: 10

      - name: Battery forced charge discharge cmd raw
        unique_id: sg_battery_forced_charge_discharge_cmd_raw
        device_address: !secret sungrow_modbus_slave
        address: 13050 # reg 13051
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

      - name: Battery forced charge discharge power
        unique_id: sg_battery_forced_charge_discharge_power
        device_address: !secret sungrow_modbus_slave
        address: 13051 # reg 13052
        input_type: holding
        data_type: uint16
        precision: 0
        # datasheet says:
        # 0 to 5000 W for SH*K-*
        # 0 to 100 % for SH*.0RT
        # for my SH10RT it is set in Watt, not in %
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scan_interval: 10

      - name: Max SoC
        unique_id: sg_max_soc
        device_address: !secret sungrow_modbus_slave
        address: 13057 # reg 13058
        input_type: holding
        data_type: uint16
        precision: 1
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Min SoC
        unique_id: sg_min_soc
        device_address: !secret sungrow_modbus_slave
        address: 13058 # reg 13059
        input_type: holding
        data_type: uint16
        precision: 1
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 0.1
        scan_interval: 10

      - name: Export power limit
        unique_id: sg_export_power_limit
        device_address: !secret sungrow_modbus_slave
        address: 13073 # reg 13074
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: "W"
        device_class: power
        state_class: measurement
        scale: 1
        scan_interval: 10

      # U16, 0x55:Disable, 0xAA:Enable
      - name: Backup mode raw
        unique_id: sg_backup_mode_raw
        device_address: !secret sungrow_modbus_slave
        address: 13074 # reg 13075
        input_type: holding
        data_type: uint16
        state_class: measurement
        scan_interval: 10

      - name: Export power limit mode raw
        unique_id: sg_export_power_limit_mode_raw
        device_address: !secret sungrow_modbus_slave
        address: 13086 # reg 13087
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

      #undocumented sensor (reverse engineered by some guys of photovoltaikforum.com and forum.iobroker.net )
      - name: Reserved SoC for backup
        unique_id: sg_reserved_soc_for_backup
        device_address: !secret sungrow_modbus_slave
        address: 13099 # reg 13100
        input_type: holding
        data_type: uint16
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        scale: 1
        scan_interval: 10

      - name: Battery max charge power
        unique_id: sg_battery_max_charge_power
        device_address: !secret sungrow_modbus_slave
        address: 33046 # reg 33047
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      - name: Battery max discharge power
        unique_id: sg_battery_max_discharge_power
        device_address: !secret sungrow_modbus_slave
        address: 33047 # reg 33048
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      #undocumented sensor (reverse engineered by some guys of photovoltaikforum.com and forum.iobroker.net )
      - name: Battery charging start power
        unique_id: sg_battery_charging_start_power
        device_address: !secret sungrow_modbus_slave
        address: 33148 # reg 33149
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      #undocumented sensor (reverse engineered by some guys of photovoltaikforum.com and forum.iobroker.net )
      - name: Battery discharging start power
        unique_id: sg_battery_discharging_start_power
        device_address: !secret sungrow_modbus_slave
        address: 33149 # reg 33150
        input_type: holding
        data_type: uint16
        precision: 0
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        scale: 10
        scan_interval: 10

      - name: Global mpp scan manual raw
        unique_id: sg_global_mpp_scan_manual_raw
        device_address: !secret sungrow_modbus_slave
        address: 30229 # reg 30230
        input_type: holding
        data_type: uint16
        precision: 0
        state_class: measurement
        scan_interval: 10

      ###################################
      # holding registers of charger
      ###################################

      - name: Charger system clock year
        unique_id: ac_system_clock_year
        device_address: !secret sungrow_modbus_slave
        address: 4999 # reg 5000
        input_type: holding
        data_type: uint16
        scan_interval: 600
        # Systemzeit Jahr unit:

      - name: Charger system clock month
        unique_id: ac_system_clock_month
        device_address: !secret sungrow_modbus_slave
        address: 5000 # reg 5001
        input_type: holding
        data_type: uint16
        scan_interval: 600
        # Systemzeit Monat unit:

      - name: Charger system clock day
        unique_id: ac_system_clock_day
        device_address: !secret sungrow_modbus_slave
        address: 5001 # reg 5002
        input_type: holding
        data_type: uint16
        scan_interval: 600
        # Systemzeit Tag unit:

      - name: Charger system clock hour
        unique_id: ac_system_clock_hour
        device_address: !secret sungrow_modbus_slave
        address: 5002 # reg 5003
        input_type: holding
        data_type: uint16
        scan_interval: 60
        # Systemzeit Stunde unit:

      - name: Charger system clock minute
        unique_id: ac_system_clock_minute
        device_address: !secret sungrow_modbus_slave
        address: 5003 # reg 5004
        input_type: holding
        data_type: uint16
        scan_interval: 60
        # Systemzeit Minute unit:

      - name: ac wb Unknown 33538
        unique_id: ac_wb_unknown_33538
        device_address: !secret sungrow_modbus_slave
        address: 33538 # reg 33539
        input_type: holding
        data_type: uint16
        scan_interval: 60

      - name: Charger wb charging enabled raw
        unique_id: ac_wb_charging_enabled_raw
        device_address: !secret sungrow_modbus_slave
        address: 33539 # reg 33540
        input_type: holding
        data_type: uint16
        scan_interval: 60
        # 85: disabled / 170: enabled

      - name: Charger wb charging mode raw
        unique_id: ac_wb_charging_mode_raw
        device_address: !secret sungrow_modbus_slave
        address: 33540 # reg 33541
        input_type: holding
        data_type: uint16
        scan_interval: 300
        # wb charging mode (160=fastCharge 161=surplusCharge 162=presetCharge 163=customizedCharge) unit:

      - name: Charger wb charging quantity
        unique_id: ac_wb_charging_quantity
        device_address: !secret sungrow_modbus_slave
        address: 33541 # reg 33542
        input_type: holding
        data_type: uint16
        precision: 1
        unit_of_measurement: kWh
        scale: 0.1
        scan_interval: 300
        # wb charging quantity (e.g. 12kwh = 120) unit:

      - name: Charger wb charging duration raw
        unique_id: ac_wb_charging_duration_raw
        device_address: !secret sungrow_modbus_slave
        address: 33542 # reg 33543
        input_type: holding
        data_type: uint32
        swap: word
        scan_interval: 300
        # wb charging duration unit:

      - name: Charger wb charging power customized charge raw
        unique_id: ac_wb_charging_power_customized_charge_raw
        device_address: !secret sungrow_modbus_slave
        address: 33544 # reg 33545
        input_type: holding
        data_type: uint16
        scan_interval: 300
        # wb customized charging (eg. 10A = 100) unit:

      - name: Charger wb customized charge start time raw
        unique_id: ac_wb_customized_charge_start_time_raw
        device_address: !secret sungrow_modbus_slave
        address: 33545 # reg 33546
        input_type: holding
        data_type: uint32
        swap: word
        scan_interval: 300
        # wb customized start time  unit:

      - name: Charger wb customized charge end time raw
        unique_id: ac_wb_customized_charge_end_time_raw
        device_address: !secret sungrow_modbus_slave
        address: 33547 # reg 33548
        input_type: holding
        data_type: uint32
        swap: word
        scan_interval: 300
        # wb customized charge end time  unit:

      - name: Charger wb surplus power from grid raw
        unique_id: ac_wb_surplus_power_from_grid_raw
        device_address: !secret sungrow_modbus_slave
        address: 33549 # reg 33550
        input_type: holding
        data_type: uint16
        scan_interval: 300
        # wb surplus 170=powerFromGrid 85=noPowerFromGrid unit:

      ###################################
      # end holding registers of charger
      ###################################

sensor:
  - platform: filter
    # NOTE: 2024-01-11: Unique id was adapted to match the sg_* uid pattern.
    # If the default dashboard does show an "unavailable" sensor, remove the unavailable one
    # and remove the suffix *_2 from daily_consumed_energy_2
    name: "Daily consumed energy (filtered)"
    entity_id: sensor.daily_consumed_energy
    unique_id: sg_daily_consumed_energy_filtered
    # commented following line, due to: 'device_class' is an invalid option for 'sensor.filter', check: device_class
    # device_class: energy
    # commented following line, due to: 'state_class' is an invalid option for 'sensor.filter', check: state_class
    # state_class: total_increasing
    filters:
      - filter: time_simple_moving_average
        window_size: "00:05"
        precision: 2

# 'virtual' template sensors for better readability
template:
  - binary_sensor:
      - name: PV generating
        unique_id: sg_pv_generating
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable') 
          and not is_state('sensor.total_dc_power', 'unavailable') 
          }}
        state: >-
          {% if states('sensor.running_state')|is_number and states('sensor.running_state')|float > 0 %}
            {# use available sensor running_state #}
            {{ states('sensor.running_state')|int |bitwise_and(0x1) }}
          {% else %} 
            {# workaround for SH*RS inverters without working running_state #}
            {% if states('sensor.total_dc_power')|int > 0 %}
              1
            {% else %} 
              0 
            {% endif %}
          {% endif %}

      - name: PV generating (delay)
        unique_id: sg_pv_generating_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.pv_generating', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.pv_generating') }}"

      - name: Battery charging
        unique_id: sg_battery_charging
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable')
          or
            (   not is_state('sensor.ems_mode_selection_raw', 'unavailable')
            and not is_state('sensor.battery_forced_charge_discharge_cmd_raw', 'unavailable') 
            and not is_state('sensor.battery_power_raw', 'unavailable') 
            and not is_state('sensor.total_dc_power', 'unavailable')
            and not is_state('sensor.load_power', 'unavailable') 
            )
          }}
        state: >-
          {% if states('sensor.running_state')|is_number and states('sensor.running_state')|float > 0 %}
            {# use available sensor running_state #}
            {% if states('sensor.running_state')|int|bitwise_and(0x2) > 0 %}
              on
            {% else %}
              off
            {% endif %}
          {% else %}
            {# workaround for SH*RS inverters without working running_state #}
            {% if (states('sensor.ems_mode_selection') ) == "Forced mode" %}
              {# EMS forced mode #}
              {% if (states('sensor.battery_forced_charge_discharge_cmd') == "Forced charge") %}
                {# in mode Forced charge #}
                {% if (states('sensor.battery_power_raw')|int > 0 ) %} 
                  {# power flow from/to battery #}
                  on
                {% else %} 
                  {# no power flow from/to battery #}
                  off
                {% endif %}
              {% else %}
                {# in EMS mode, but not in mode Forced charge #}
                off
              {% endif %}
            {% else %} 
              {# not in EMS forced mode, assuming self consumption mode #}
              {% if states('sensor.total_dc_power')|int > states('sensor.load_power')|int %}
                {# more power generated than consumed. assuming battery charging #}
                on
              {% else %} 
                off
              {% endif %}
            {% endif %}
          {% endif %}

      - name: Battery charging (delay)
        unique_id: sg_battery_charging_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.battery_charging', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.battery_charging') }}"

      - name: Battery discharging
        unique_id: sg_battery_discharging
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable')
          or
            (   not is_state('sensor.ems_mode_selection_raw', 'unavailable')
            and not is_state('sensor.battery_forced_charge_discharge_cmd_raw', 'unavailable')
            and not is_state('sensor.battery_power_raw', 'unavailable')
            and not is_state('sensor.total_dc_power', 'unavailable') 
            and not is_state('sensor.load_power', 'unavailable') 
            )
          }}
        state: >-
          {% if states('sensor.running_state')|is_number and states('sensor.running_state')|float > 0 %}
            {# use available sensor running_state #}
            {% if states('sensor.running_state')|int|bitwise_and(0x4) > 0 %}
              on
            {% else %}
              off
            {% endif %}
          {% else %}
            {# workaround for SH*RS inverters without working running_state #}
            {% if (states('sensor.ems_mode_selection') ) == "Forced mode" %}
              {# EMS forced mode #}
              {% if (states('sensor.battery_forced_charge_discharge_cmd') == "Forced discharge") %}
                {# in mode Forced discharge #}
                {% if (states('sensor.battery_power_raw')|int > 0 ) %}
                  {# power flow from/to battery #}
                  on
                {% else %} 
                  {# no power flow from/to battery #}
                  off
                {% endif %}
              {% else %} 
                {# in EMS mode, but not in mode Forced charge #}
                off
              {% endif %}
            {% else %} 
              {# not in EMS forced mode, assuming self consumption mode #}
              {% if ( ( states('sensor.total_dc_power')|int < states('sensor.load_power')|int ) ) and states('sensor.battery_power_raw')|int > 0 %}  
                {# more power consumed than generated and some battery power --> assuming battery discharging #}
                on
              {% else %} 
                off
              {% endif %}
            {% endif %}
          {% endif %}

      - name: Battery discharging (delay)
        unique_id: sg_battery_discharging_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.battery_discharging', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.battery_discharging') }}"

      - name: Exporting power
        unique_id: sg_exporting_power
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable') 
          and not is_state('sensor.export_power_raw', 'unavailable') 
          }}
        state: >-
          {% if states('sensor.running_state')|is_number and states('sensor.running_state')|float > 0 %}
            {# use available sensor running_state #}
            {{ states('sensor.running_state')|int|bitwise_and(0x10) > 0 }}
          {% else %} 
            {# workaround for SH*RS inverters without working running_state #}
            {% if states('sensor.export_power_raw')|int > 0 %}
              1
            {% else %} 
              0 
            {% endif %}
          {% endif %}

      - name: Exporting power (delay)
        unique_id: sg_exporting_power_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.exporting_power', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.exporting_power') }}"

      - name: Importing power
        unique_id: sg_importing_power
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.running_state', 'unavailable') 
          and not is_state('sensor.running_state', 'unavailable')
          }}
        state: >-
          {% if states('sensor.running_state')|is_number and states('sensor.running_state')|float > 0 %}
            {# use available sensor running_state #}
            {{ states('sensor.running_state')|int|bitwise_and(0x20) > 0 }}
          {% else %} 
            {# workaround for SH*RS inverters without working running_state #}
            {% if states('sensor.export_power_raw')|int < 0 %}
              1
            {% else %}
              0
            {% endif %}
          {% endif %}

      - name: Importing power (delay)
        unique_id: sg_importing_power_delay
        # TODO: test more with these parameters for template binary sensors
        # device_class: none / power
        # state_class: measurement
        availability: "{{ not is_state('binary_sensor.importing_power', 'unavailable') }}"
        delay_on:
          seconds: 60
        state: "{{ states('binary_sensor.importing_power') }}"

  - sensor:
      - name: MPPT1 power
        unique_id: sg_mppt1_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.mppt1_voltage', 'unavailable') 
          and not is_state('sensor.mppt1_current', 'unavailable') 
          }}
        state: "{{ (states('sensor.mppt1_voltage') | float * states('sensor.mppt1_current') | float) |int }}"

      - name: MPPT2 power
        unique_id: sg_mppt2_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.mppt2_voltage', 'unavailable') 
          and not is_state('sensor.mppt2_current', 'unavailable' ) 
          }}
        state: "{{ (states('sensor.mppt2_voltage') | float * states('sensor.mppt2_current') | float) |int }}"

      - name: Phase A power
        unique_id: sg_phase_a_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.phase_a_voltage', 'unavailable')
          and not is_state('sensor.phase_a_current', 'unavailable')
          }}
        state: "{{ (states('sensor.phase_a_voltage') | float * states('sensor.phase_a_current') | float) |int }}"

      - name: Phase B power
        unique_id: sg_phase_b_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.phase_b_voltage', 'unavailable') 
          and not is_state('sensor.phase_b_current', 'unavailable') 
          }}
        state: "{{ (states('sensor.phase_b_voltage') | float * states('sensor.phase_b_current') | float) |int }}"

      - name: Phase C power
        unique_id: sg_phase_c_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.phase_c_voltage', 'unavailable')
          and not is_state('sensor.phase_c_current', 'unavailable')
          }}
        state: "{{ (states('sensor.phase_c_voltage') | float * states('sensor.phase_c_current') | float) |int }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter active power
        unique_id: sg_meter_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_active_power_raw', 'unavailable')
          and states('sensor.meter_active_power_raw')|int != 0x7FFFFFFF
          }}
        state: "{{ states('sensor.meter_active_power_raw') }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter phase A active power
        unique_id: sg_meter_phase_a_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_phase_a_active_power_raw', 'unavailable')
          and states('sensor.meter_phase_a_active_power_raw')|int != 0x7FFFFFFF
          }}
        state: "{{ states('sensor.meter_phase_a_active_power_raw') }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter phase B active power
        unique_id: sg_meter_phase_b_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_phase_b_active_power_raw', 'unavailable') 
          and states('sensor.meter_phase_b_active_power_raw')|int != 0x7FFFFFFF 
          }}
        state: "{{ states('sensor.meter_phase_b_active_power_raw') }}"

      # template sensor in case the meter is not available (grid is off) and returns 0x7FFFFF
      - name: Meter phase C active power
        unique_id: sg_meter_phase_c_active_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.meter_phase_c_active_power_raw', 'unavailable')
          and states('sensor.meter_phase_c_active_power_raw')|int != 0x7FFFFFFF
          }}
        state: "{{ states('sensor.meter_phase_c_active_power_raw') }}"

      - name: Sungrow inverter state
        unique_id: sg_inverter_state
        device_class: enum
        availability: "{{ not is_state('sensor.system_state', 'unavailable') }}"
        state: >-
          {% if ((states('sensor.system_state') |int) in [0x0000,0x0040]) %}
            Running
          {% elif ((states('sensor.system_state') |int) == 0x0410) %}
            Off-grid Charge
          {% elif ((states('sensor.system_state') |int) == 0x0200) %}
            Update Failed
          {% elif ((states('sensor.system_state') |int) == 0x0400) %}
            Maintain mode
          {% elif ((states('sensor.system_state') |int) == 0x0800) %}
            Forced mode
          {% elif ((states('sensor.system_state') |int) == 0x1000) %}
            Off-grid mode
          {% elif ((states('sensor.system_state') |int) == 0x1111) %}
            Un-Initialized
          {% elif ((states('sensor.system_state') |int) in [0x0010,0x12000]) %}
            Initial Standby
          {% elif ((states('sensor.system_state') |int) in [0x1300,0x0002]) %}
            Shutdown
          {% elif ((states('sensor.system_state') |int) in [0x1400,0x0008] ) %}
            Standby
          {% elif ((states('sensor.system_state') |int) in [0x1500,0x0004] ) %}
            Emergency Stop
          {% elif ((states('sensor.system_state') |int) in [0x1600,0x0020]) %}
            Startup
          {% elif ((states('sensor.system_state') |int) == 0x1700) %}
            AFCI self test shutdown
          {% elif ((states('sensor.system_state') |int) == 0x1800) %}
            Intelligent Station Building Status
          {% elif ((states('sensor.system_state') |int) == 0x1900) %}
            Safe Mode
          {% elif ((states('sensor.system_state') |int) == 0x2000) %}
            Open Loop
          {% elif ((states('sensor.system_state') |int) == 0x2501) %}
            Restarting
          {% elif ((states('sensor.system_state') |int) == 0x4000) %}
            External EMS mode
          {% elif ((states('sensor.system_state') |int) == 0x4001) %} ### Emergency loading from grid when SOC is under BackUp SOC
            Emergency Battery Charging            
          {% elif ((states('sensor.system_state') |int) in [0x55000,0x0100]) %}
            Fault
          {% elif ((states('sensor.system_state') |int) in [0x8000,0x0001]) %}
            Stop
          {% elif ((states('sensor.system_state') |int) in [0x8100,0x0080]) %}
            De-rating Running
          {% elif ((states('sensor.system_state') |int) == 0x8200) %}
            Dispatch Run
          {% elif ((states('sensor.system_state') |int) == 0x9100) %}
            Warn Running
          {% else %}
            Unknown - should not see me! {{ (states('sensor.system_state') |int) }}
          {% endif %}

      - name: Sungrow device type
        unique_id: sg_device_type
        availability: "{{ not is_state('sensor.sungrow_device_type_code', 'unavailable') }}"
        device_class: enum
        state: >-
          {% if ((states('sensor.sungrow_device_type_code') |int)  == 0x0D06) %}
            SH3K6
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D07) %}
            SH4K6
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D09) %}
            SH5K-20  
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D03) %}
            SH5K-V13
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D0A) %}
            SH3K6-30
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D0B) %}
            SH4K6-30
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D0C) %}
            SH5K-30
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D17) %}
            SH3.RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D0D) %}
            SH3.6RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D18) %}
            SH4.0RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D0F) %}
            SH5.0RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D10) %}
            SH6.0RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D1A) %}
            SH8.0RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0D1B) %}
            SH10RS
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E00) %}
            SH5.0RT
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E01) %}
            SH6.0RT
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E02) %}
            SH8.0RT
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E03) %}
            SH10RT
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E10) %}
            SH5.0RT-20
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E11) %}
            SH6.0RT-20
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E12) %}
            SH8.0RT-20
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E13) %}
            SH10RT-20
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E0C) %}
            SH5.0RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E0D) %}
            SH6.0RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E0E) %}
            SH8.0RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E0F) %}
            SH10RT-V112
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E08) %}
            SH5.0RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E09) %}
            SH6.0RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E0A) %}
            SH8.0RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E0B) %}
            SH10RT-V122
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E20) %}
            SH5T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E21) %}
            SH6T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E22) %}
            SH8T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E23) %}
            SH10T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E24) %}
            SH12T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E25) %}
            SH15T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E26) %}
            SH20T-V11
          {% elif ((states('sensor.sungrow_device_type_code') |int) == 0x0E28) %}
            SH25T-V11
          {% else %}
            Unknown device code: {{ '%0x' % (states('sensor.sungrow_device_type_code') |int)  }}
          {% endif %}

      # make the sensor battery_forced_charge_discharge_cmd more human readable
      # Inverter States from modbus reference manual
      # 0xAA forced charge
      # 0xBB forced discharge
      # 0xCC Stop (default)
      - name: Battery forced charge discharge cmd
        unique_id: sg_battery_forced_charge_discharge_cmd
        availability: "{{ not is_state('sensor.battery_forced_charge_discharge_cmd_raw', 'unavailable') }}"
        # TODO: test state_class with enum
        # state_class: measurement
        device_class: enum
        state: >-
          {% if ((states('sensor.battery_forced_charge_discharge_cmd_raw') |int) == 0x00AA) %}
            Forced charge
          {% elif ((states('sensor.battery_forced_charge_discharge_cmd_raw') |int)  == 0x00BB) %}
            Forced discharge
          {% elif ((states('sensor.battery_forced_charge_discharge_cmd_raw') |int)  == 0x00CC) %}
            Stop (default)
          {% else %}
            Unknown - should not see me! code: {{ (states('sensor.battery_forced_charge_discharge_cmd_raw') |int) }}
          {% endif %}

      - name: Backup mode
        unique_id: sg_backup_mode
        availability: "{{ not is_state('sensor.backup_mode_raw', 'unavailable') }}"
        device_class: enum
        state: >-
          {% if ((states('sensor.backup_mode_raw') |int) == 0x00AA) %}
            Enabled
          {% elif ((states('sensor.backup_mode_raw') |int)  == 0x0055) %}
            Disabled
          {% else %}
            Unknown - should not see me! code: {{ (states('sensor.backup_mode_raw') |int) }}
          {% endif %}

      - name: Export power limit mode
        unique_id: sg_export_power_limit_mode
        availability: "{{ not is_state('sensor.export_power_limit_mode_raw', 'unavailable') }}"
        device_class: enum
        state: >-
          {% if ((states('sensor.export_power_limit_mode_raw') |int) == 0x00AA) %}
            Enabled
          {% elif ((states('sensor.export_power_limit_mode_raw') |int)  == 0x0055) %}
            Disabled
          {% else %}
            Unknown - should not see me! code: {{ (states('sensor.export_power_limit_mode_raw') |int) }}
          {% endif %}

      # make the sensor ems_selection_raw more human readable
      - name: EMS mode selection
        unique_id: sg_ems_mode_selection
        availability: "{{ not is_state('sensor.ems_mode_selection_raw', 'unavailable') }}"
        device_class: enum
        state: >-
          {% if ((states('sensor.ems_mode_selection_raw') |int) == 0) %}
            Self-consumption mode (default)
          {% elif ((states('sensor.ems_mode_selection_raw') |int) == 2) %}
            Forced mode
          {% elif ((states('sensor.ems_mode_selection_raw') |int) == 3) %}
            External EMS
          {% elif ((states('sensor.ems_mode_selection_raw') |int) == 4) %}
            VPP
          {% elif ((states('sensor.ems_mode_selection_raw') |int) == 8) %}
            MicroGrid
          {% else %}
            Unknown - should not see me! code: {{ (states('sensor.ems_mode_selection_raw') |int) }}
          {% endif %}

      # positive if charging and negative if discharging
      - name: Signed battery power
        unique_id: sg_signed_battery_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('binary_sensor.battery_charging', 'unavailable') 
          and not is_state('binary_sensor.battery_discharging', 'unavailable')
          and not is_state('sensor.battery_power_raw', 'unavailable')
          }}
        state: >-
          {% if is_state('binary_sensor.battery_charging', 'on') %}
            {{ (states('sensor.battery_power_raw') |float |abs)}} 
          {% elif is_state('binary_sensor.battery_discharging', 'on') %} 
            {{ (states('sensor.battery_power_raw') |float |abs * -1)}} 
          {% else %} 
            0 
          {% endif %}

      # positive if charging else zero
      - name: Battery charging power
        unique_id: sg_battery_charging_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('binary_sensor.battery_charging', 'unavailable') 
          and not is_state('sensor.battery_power_raw', 'unavailable')
          }}
        state: >-
          {% if is_state('binary_sensor.battery_charging', 'on') %}
            {{ states('sensor.battery_power_raw')|int |abs }}
          {% else %}
            0
          {% endif %}

      # positive if discharging else zero
      - name: Battery discharging power
        unique_id: sg_battery_discharging_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: >-
          {{ 
          not is_state('binary_sensor.battery_discharging', 'unavailable') 
          and not is_state('sensor.battery_power_raw', 'unavailable') 
          }}
        state: >-
          {% if is_state('binary_sensor.battery_discharging', 'on') %}
            {{ states('sensor.battery_power_raw')|int |abs }}
          {% else %}
            0
          {% endif %}

      # power from grid: positive if importing, else zero
      - name: Import power
        unique_id: sg_import_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: "{{ not is_state('sensor.export_power_raw', 'unavailable') }}"
        state: >-
          {% if states('sensor.export_power_raw')|int < 0 %}
            {{ states('sensor.export_power_raw')|int *-1 }}
          {% else %}
            0
          {% endif %}

      # power to grid: positive if exporting, else zero
      - name: Export power
        unique_id: sg_export_power
        unit_of_measurement: W
        device_class: power
        state_class: measurement
        availability: "{{states('sensor.export_power_raw')|is_number }}"
        state: >-
          {% if states('sensor.export_power_raw')|int > 0 %}
            {{ states('sensor.export_power_raw') }}
          {% else %}
            0
          {% endif %}

      - name: "Monthly PV generation (current)"
        unique_id: sg_monthly_pv_generation_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currMonth = 'monthly_pv_generation_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth)|is_number }}
        state: >
          {% set currMonth = 'monthly_pv_generation_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth) }}

      - name: "Yearly PV generation (current)"
        unique_id: sg_yearly_pv_generation_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currYear = 'yearly_pv_generation_' ~ now().year %}
          {{ states('sensor.' ~ currYear)|is_number }}
        state: >
          {% set currYear = 'yearly_pv_generation_' ~ now().year %}
          {{ states('sensor.' ~ currYear) }}

      - name: "Monthly export (current)"
        unique_id: sg_monthly_export_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currMonth = 'monthly_export_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth)|is_number }}
        state: >
          {% set currMonth = 'monthly_export_' ~ '%0.2d' % now().month ~ '_' ~ now().timestamp() | timestamp_custom('%B') | lower %}
          {{ states('sensor.' ~ currMonth) }}

      - name: "Yearly export (current)"
        unique_id: sg_yearly_export_current
        unit_of_measurement: kWh
        device_class: energy
        state_class: total_increasing
        availability: >-
          {% set currYear = 'yearly_export_' ~ now().year %}
          {{ states('sensor.' ~ currYear)|is_number }}
        state: >
          {% set currYear = 'yearly_export_' ~ now().year %}
          {{ states('sensor.' ~ currYear) }}

      # If min_soc is set to 15 and max soc is set to 90,
      # this "nominal battery level" will be between 15% and 90%
      # while the "battery level" is between 0 and 100%
      - name: "Battery level (nominal)"
        unique_id: sg_battery_level_nom
        unit_of_measurement: "%"
        device_class: battery
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_level', 'unavailable') 
          and not is_state('sensor.min_soc', 'unavailable') 
          and not is_state('sensor.max_soc', 'unavailable') 
          }}
        state: >-
          {% set soc_min = states('sensor.min_soc') | float %}
          {% set soc_max = states('sensor.max_soc') | float %}
          {% set soc_cur = states('sensor.battery_level') | float %}
          {{
            (soc_min + ((soc_max - soc_min) * (soc_cur / 100))) | round(1)
          }}

      # If min_soc is set to 15 and max soc is set to 90,
      # this "nominal battery charge" will be between 15% and 90% of the capacity value,
      # reflecting the limits set by min_soc and max_soc
      - name: "Battery charge (nominal)"
        unique_id: sg_battery_charge_nom
        unit_of_measurement: kWh
        device_class: energy_storage
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_capacity', 'unavailable')
          and not is_state('sensor.battery_level_nominal', 'unavailable')
          }}
        state: >-
          {{
            ( states('sensor.battery_capacity') | float *
            states('sensor.battery_level_nominal') | float / 100 )| round(1)
          }}

      # this is the actually **usable energy ** of the battery
      # with respect to min/ max soc, but WITHOUT the battery health.
      # If min_soc is set to 15 and max soc is set to 90,
      # this value is 0.75 * capacity
      - name: "Battery charge"
        unique_id: sg_battery_charge
        unit_of_measurement: kWh
        device_class: energy_storage
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_capacity', 'unavailable') 
          and not is_state('sensor.battery_level', 'unavailable') 
          and not is_state('sensor.min_soc', 'unavailable') 
          and not is_state('sensor.max_soc', 'unavailable') 
          }}
        state: >-
          {{ 
            ( states('sensor.battery_capacity')|float 
            * ( states('sensor.max_soc')|float - states('sensor.min_soc')|float ) /100 
            * states('sensor.battery_level')|float /100 
            ) |round(2)
          }}

      # this is the actually **usable energy ** of the battery
      # with respect to min/ max soc, including the battery health.
      # This value is determined by multiplying Battery charge
      # with the health factor (battery_health), which is often a value
      # starting at 100 and decreases over time. Mine is 98% after 2 years.
      - name: "Battery charge (health-rated)"
        unique_id: sg_battery_charge_health_rated
        unit_of_measurement: kWh
        device_class: energy_storage
        state_class: measurement
        availability: >-
          {{ 
          not is_state('sensor.battery_charge', 'unavailable') 
          and not is_state('sensor.battery_state_of_health', 'unavailable') 
          }}
        state: >-
          {{ 
            ( states('sensor.battery_charge')|float 
            * states('sensor.battery_state_of_health')|float / 100 
            ) |round(2)
          }}

      # NOTE: 2024-01-11: Unique id was adapted to match the sg_* uid pattern.
      # If the default dashboard does show an "unavailable" sensor, remove the unavailable one
      # and remove the suffix *_2 from daily_consumed_energy_2
      - name: Daily consumed energy
        unique_id: sg_daily_consumed_energy
        unit_of_measurement: kWh
        device_class: energy
        # the state class is not total_increasing, because sometimes the read value are read at different times,
        # resulting in decreasing values.
        # "measurement" does not work, because it is incompatible with "energy"
        state_class: total
        availability: >-
          {{ 
          not is_state('sensor.daily_pv_generation', 'unavailable') 
          and not is_state('sensor.daily_exported_energy', 'unavailable') 
          and not is_state('sensor.daily_imported_energy', 'unavailable') 
          and not is_state('sensor.daily_battery_charge', 'unavailable') 
          and not is_state('sensor.daily_battery_discharge', 'unavailable') 
          }}
        state: >-
          {{ 
            (
              states('sensor.daily_pv_generation')|float 
              - states('sensor.daily_exported_energy')|float 
              + states('sensor.daily_imported_energy')|float 
              - states('sensor.daily_battery_charge')|float 
              + states('sensor.daily_battery_discharge')|float
            ) 
          }}

      # NOTE: 2024-01-11: Unique id was adapted to match the sg_* uid pattern.
      # If the default dashboard does show an "unavailable" sensor, remove the unavailable one
      # and remove the suffix *_2 from daily_consumed_energy_2
      - name: Total consumed energy
        unique_id: sg_total_consumed_energy
        unit_of_measurement: kWh
        device_class: energy
        state_class: total
        availability: >-
          {{ 
          not is_state('sensor.total_pv_generation', 'unavailable') 
          and not is_state('sensor.total_exported_energy', 'unavailable') 
          and not is_state('sensor.total_imported_energy', 'unavailable') 
          and not is_state('sensor.total_battery_charge', 'unavailable') 
          and not is_state('sensor.total_battery_discharge', 'unavailable') 
          }}
        state: >-
          {{ 
            (
              states('sensor.total_pv_generation')|float 
              - states('sensor.total_exported_energy')|float 
              + states('sensor.total_imported_energy')|float 
              - states('sensor.total_battery_charge')|float 
              + states('sensor.total_battery_discharge')|float
            )
          }}

      ###################################
      # charger templates
      ###################################
      
      - name: Charging mode
        unique_id: ac_wb_charging_mode
        state: >-
          {% if ((states('sensor.charger_wb_charging_mode_raw') | int(default=0))  == 160) %}
            Fast charging
          {% elif ((states('sensor.charger_wb_charging_mode_raw') | int(default=0))  == 161) %}
            Surplus charging
          {% elif ((states('sensor.charger_wb_charging_mode_raw') | int(default=0))  == 162) %}
            Preset charging
          {% elif ((states('sensor.charger_wb_charging_mode_raw') | int(default=0)) == 163) %}
            Customized charging
          {% else %}
            Unknown charging mode!
          {% endif %}

      - name: Charging power customized charge
        unique_id: ac_wb_charging_power_customized_charge
        state: >-
          {% if ((states('sensor.charger_wb_charging_power_customized_charge_raw') | int(default=0))  == 160) %}
            16A 11kW
          {% elif ((states('sensor.charger_wb_charging_power_customized_charge_raw') | int(default=0))  == 140) %}
            14A 9,66kW
          {% elif ((states('sensor.charger_wb_charging_power_customized_charge_raw') | int(default=0))  == 120) %}
            12A 8,28kW
          {% elif ((states('sensor.charger_wb_charging_power_customized_charge_raw') | int(default=0)) == 100) %}
            10A 6,9kW
          {% elif ((states('sensor.charger_wb_charging_power_customized_charge_raw') | int(default=0))  == 80) %}
            8A 5,52kW
          {% elif ((states('sensor.charger_wb_charging_power_customized_charge_raw') | int(default=0)) == 60) %}
            6A 4,14kW
          {% else %}
            Unknown power for customized charge!
          {% endif %}

      - name: Charger customized charge start time
        unique_id: charger_wb_customized_charge_start_time
        state: >
          {{ as_datetime(states.sensor.charger_wb_customized_charge_start_time_raw.state).strftime("%d.%m.%Y %H:%M") }}

      - name: Charger customized charge end time
        unique_id: charger_wb_customized_charge_end_time
        state: >
          {{ as_datetime(states.sensor.charger_wb_customized_charge_end_time_raw.state).strftime("%d.%m.%Y %H:%M") }}

      - name: Charger charging duration
        unique_id: charger_wb_charging_duration
        state: >
          {{ as_datetime(states.sensor.charger_wb_charging_duration_raw.state).strftime("%d.%m.%Y %H:%M") }}

      - name: Charger system datetime
        unique_id: charger_wb_system_datetime
        state: >
          {{ states('sensor.charger_system_clock_year')}}-{{"%.2d" | format(states('sensor.charger_system_clock_month') | int)}}-{{"%.2d" | format(states('sensor.charger_system_clock_day') | int)}} {{"%.2d" | format(states('sensor.charger_system_clock_hour') | int)}}:{{"%.2d" | format(states('sensor.charger_system_clock_minute') | int) }}

      - name: Charger wb surplus power from grid
        unique_id: ac_wb_surplus_power_from_grid
        state: >-
          {% if is_state("sensor.charger_wb_surplus_power_from_grid_raw", "170") %}
            On
          {% elif is_state("sensor.charger_wb_surplus_power_from_grid_raw", "85") %}
            Off
          {% else %}
            Unknown status {{ states("sensor.charger_wb_surplus_power_from_grid_raw") }}
          {% endif %}

      - name: Charger wb charging enabled
        unique_id: ac_wb_charging_enabled
        state: >-
          {% if is_state("sensor.charger_wb_charging_enabled_raw", "170") %}
            On
          {% elif is_state("sensor.charger_wb_charging_enabled_raw", "85") %}
            Off
          {% else %}
            Unknown status {{ states("sensor.charger_wb_charging_enabled_raw") }}
          {% endif %}

      ###################################
      # end charger templates
      ###################################

# getting input for Min and Max SoC
input_number:
  set_sg_min_soc:
    name: Min SoC (%)
    min: 0
    max: 50
    step: 1

  set_sg_max_soc:
    name: Max SoC (%)
    min: 50
    max: 100
    step: 1

  set_sg_reserved_soc_for_backup:
    name: Reserved SoC for backup (%)
    min: 0
    max: 100
    step: 1

  set_sg_forced_charge_discharge_power:
    name: Forced charge discharge power (W)
    min: 0
    max: 5000 # change this value according to the capability of your battery
    step: 100

  set_sg_battery_max_charge_power:
    name: Max battery charge power (W)
    min: 100
    max: 5000 # change this value according to the capability of your battery
    step: 100

  set_sg_battery_max_discharge_power:
    name: Max battery discharge power (W)
    min: 100
    max: 5000 # change this value according to the capability of your battery
    step: 100

  # This threshold is compared against the currently achievable charging power, not just against the currently available surplus.
  # If this is set higher than the maximum charging power of the battery, charging will not start.
  # If currently achievable charging power drops below this threshold, charging will stop. Actual charging power (limited by register 33047) is ignored.
  # Charging might stop before reaching 100% if set too close to the maximum charging power of the battery, due to achievable charging power naturally dropping at high state of charge.
  set_sg_battery_charging_start_power:
    name: Battery charging start power (W)
    min: 0
    max: 1000
    step: 10

  set_sg_battery_discharging_start_power:
    name: Battery discharging start power (W)
    min: 0
    max: 1000
    step: 10

  set_sg_export_power_limit:
    name: Export power limit (W)
    min: 0
    max: 10500 # TODO Note: max for SH10.RT. It would be nice to have this as a global variable /secret
    step: 100

  ###################################
  # charger input_number
  ###################################

  set_ac_wb_charging_quantity:
    name: Set charger charging quantity
    min: 1
    max: 200
    step: 1
    mode: box
    initial: 200
    
  set_ac_wb_stop_by_soc_percentage:
    name: Stop charging by SoC percentage
    min: 1
    max: 100
    step: 1
    mode: box
    icon: mdi:battery-arrow-down-outline
    
  set_ac_wb_start_by_soc_percentage:
    name: Start charging by SoC percentage
    min: 1
    max: 100
    step: 1
    mode: box
    icon: mdi:battery-arrow-up-outline

  ###################################
  # end of charger input_number
  ###################################

###################################
# charger input_button
###################################

input_button:
  set_ac_wb_start_charging:
    name: Start charging
    icon: mdi:play

  set_ac_wb_stop_charging:
    name: Stop charging
    icon: mdi:stop

###################################
# end of charger input_button
###################################

input_select:
  set_sg_inverter_run_mode:
    name: Inverter mode
    options:
      - "Enabled"
      - "Shutdown"

  # get input for battery mode (forced charge/discharge, stop (default) )
  set_sg_ems_mode:
    name: EMS mode
    options:
      - "Self-consumption mode (default)"
      - "Forced mode"
      - "External EMS" # required for multiple inverters main /follower?
    # these are commented, because they are rarely used
    #      - "VPP"
    #      - "MicroGrid"
    icon: mdi:battery-unknown

  set_sg_battery_forced_charge_discharge_cmd:
    name: Battery forced charge discharge cmd
    options:
      - "Stop (default)"
      - "Forced charge"
      - "Forced discharge"
    icon: mdi:battery-unknown

  set_sg_backup_mode:
    name: Backup mode
    options:
      - "Enabled"
      - "Disabled"
    icon: mdi:export

  set_sg_export_power_limit_mode:
    name: Export power limit mode
    options:
      - "Enabled"
      - "Disabled"
    icon: mdi:export

  set_sg_global_mpp_scan_manual:
    name: Global mpp scan manual
    options:
      - "Enabled"
      - "Disabled"
    icon: mdi:export

  ###################################
  # charger input_select
  ###################################

  set_ac_wb_charging_mode:
    name: Charging mode
    options:
      - "Fast charging"
      - "Surplus charging"
      - "Preset charging"
      - "Customized charging"
    icon: mdi:ev-station

  set_ac_wb_charging_power_customized_charge:
    name: Charging power customized charge
    options:
      - "16A 11kW"
      - "14A 9,66kW"
      - "12A 8,28kW"
      - "10A 6,9kW"
      - "8A 5,52kW"
      - "6A 4,14kW"
    icon: mdi:arrow-up-down-bold

  ###################################
  # end of charger input_select
  ###################################

###################################
# charger input_boolean
###################################

input_boolean:
  set_ac_wb_surplus_power_from_grid:
    name: Surplus charging - power from grid
    icon: mdi:transmission-tower-export
    
  set_ac_wb_stop_by_soc_enabled:
    name: Stop charging by SoC enabled
    icon: mdi:battery-arrow-down-outline
    
  set_ac_wb_start_by_soc_enabled:
    name: Start charging by SoC enabled
    icon: mdi:battery-arrow-up-outline

###################################
# end of charger input_boolean
###################################

###################################
# charger input_datetime
###################################

input_datetime:
  set_ac_wb_charging_duration:
    name: Charger charging duration picker
    has_date: true
    has_time: true
    icon: mdi:timelapse

  set_ac_wb_customized_charge_start_time:
    name: Charger customized charge start time picker
    has_date: true
    has_time: true
    icon: mdi:clock-start

  set_ac_wb_customized_charge_end_time:
    name: Charger customized charge end time picker
    has_date: true
    has_time: true
    icon: mdi:clock-end

###################################
# end of charger input_datetime
###################################

# Automations: Write modbus registers on input changes via GUI
# note: If you change a value by the sliders, it will take up to 60 seconds until the state variables are updated
# Unfortunately, I could not find a way to "force update" modbus registers, yet...
automation:
  - id: "automation_sungrow_inverter_state"
    alias: "sungrow inverter state"
    description: "Enables/ stops the inverter"
    triggers:
      - trigger: state
        entity_id:
          - input_select.set_sg_inverter_run_mode
    conditions: []
    variables:
      sg_start: 0xCF
      sg_stop: 0xCE
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 12999 # reg 13000
          value: >
            {% if is_state('input_select.set_sg_inverter_run_mode', "Enabled") %}
              {{sg_start}}
            {% else %}
              {{sg_stop}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_state_input_selector_update"
    alias: "sungrow inverter enable/ stop input selector update"
    description: "Updates enable/ stops input selector"
    triggers:
      - trigger: state
        entity_id:
          - sensor.sungrow_inverter_state
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.sungrow_inverter_state', 'unavailable') }}"
    actions:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_sg_inverter_run_mode
        data:
          option: >
            {% if is_state('sensor.sungrow_inverter_state', "Shutdown") %}
              Shutdown
            {% else %}
              Enabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_update_max_soc"
    alias: "sungrow inverter update max SoC"
    description: "Updates Sungrow max Soc holding register"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_max_soc
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13057 # reg 13058
          value: "{{ states('input_number.set_sg_max_soc') | int *10}}"
    mode: single

  - id: "automation_sungrow_inverter_update_max_soc_input_slider_update"
    alias: "sungrow inverter max SoC input slider update"
    description: "Updates Sungrow max Soc input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.max_soc
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.max_soc', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_max_soc
        data:
          value: "{{ states('sensor.max_soc') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_min_soc"
    alias: "sungrow inverter update min SoC"
    description: "Updates Sungrow min Soc holding register"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_min_soc
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13058 # reg 13059
          value: "{{ states('input_number.set_sg_min_soc') | int *10}}"
    mode: single

  - id: "automation_sungrow_inverter_update_min_soc_input_slider_update"
    alias: "sungrow inverter min SoC input slider update"
    description: "Updates Sungrow min Soc input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.min_soc
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.min_soc', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_min_soc
        data:
          value: "{{ states('sensor.min_soc') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_reserved_soc_for_backup"
    alias: "sungrow inverter update reserved soc for backup"
    description: "Updates reserved SoC for backup register"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_reserved_soc_for_backup
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13099 # reg 13100
          value: "{{ states('input_number.set_sg_reserved_soc_for_backup') | int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_reserved_backup_soc_input_slider_update"
    alias: "sungrow inverter reserved backup SoC input slider update"
    description: "Updates Sungrow reserved backup Soc input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.reserved_soc_for_backup
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.reserved_soc_for_backup', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_reserved_soc_for_backup
        data:
          value: "{{ states('sensor.reserved_soc_for_backup') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_cmd"
    alias: "sungrow inverter update battery forced charge discharge cmd"
    description: "Updates Sungrow holding register for battery forced charge discharge command"
    triggers:
      - trigger: state
        entity_id:
          - input_select.set_sg_battery_forced_charge_discharge_cmd
    conditions: []
    variables:
      ems_forced_charge: 0xAA
      ems_forced_discharge: 0xBB
      ems_stop_default: 0xCC
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13050 # reg 13051
          value: >
            {% if is_state('input_select.set_sg_battery_forced_charge_discharge_cmd', "Stop (default)") %} 
              {{ems_stop_default}}
            {% elif is_state('input_select.set_sg_battery_forced_charge_discharge_cmd', "Forced charge") %} 
              {{ems_forced_charge}}
            {% elif is_state('input_select.set_sg_battery_forced_charge_discharge_cmd', "Forced discharge") %} 
              {{ems_forced_discharge}}
            {% else %}
              {{ems_stop_default}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_cmd_input_select_update"
    alias: "sungrow inverter update battery forced charge discharge cmd input select update"
    description: "Updates Sungrow battery forced charge discharge cmd input select"
    triggers:
      - trigger: state
        entity_id:
          - sensor.battery_forced_charge_discharge_cmd
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_forced_charge_discharge_cmd', 'unavailable') }}"
    actions:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
        data:
          option: "{{ states('sensor.battery_forced_charge_discharge_cmd') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_ems_mode"
    alias: "sungrow inverter update EMS mode"
    description: "Updates EMS mode"
    triggers:
      - trigger: state
        entity_id:
          - input_select.set_sg_ems_mode
    conditions: []
    variables:
      ems_mode_self_consume: 0
      ems_mode_forced: 2
      ems_mode_external: 3
      ems_mode_vpp: 4
      ems_mode_microgrid: 8
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13049 # reg 13050
          value: >
            {% if is_state('input_select.set_sg_ems_mode', "Self-consumption mode (default)") %} 
              {{ems_mode_self_consume}}
            {% elif is_state('input_select.set_sg_ems_mode', "Forced mode") %} 
              {{ems_mode_forced}}
            {% elif is_state('input_select.set_sg_ems_mode', "External EMS") %} 
              {{ems_mode_external}}
            {% elif is_state('input_select.set_sg_ems_mode', "VPP") %} 
              {{ems_mode_vpp}}
            {% elif is_state('input_select.set_sg_ems_mode', "MicroGrid") %} 
              {{ems_mode_microgrid}}
            {% else %} 
              {{ems_mode_self_consume}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_export_power_limit_mode_update"
    alias: "sungrow inverter export power limit mode update"
    description: "Updates Enable/Disable for export power limit mode"
    triggers:
      - trigger: state
        entity_id:
          - sensor.export_power_limit_mode_raw
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.export_power_limit_mode_raw', 'unavailable') }}"
    actions:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_sg_export_power_limit_mode
        data:
          option: >
            {% if ((states('sensor.export_power_limit_mode_raw') |int) == 0x00AA) %} 
              Enabled
            {% elif ((states('sensor.export_power_limit_mode_raw') |int) == 0x0055) %} 
              Disabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_backup_mode"
    alias: "sungrow inverter backup mode"
    description: "Set backup mode"
    triggers:
      - trigger: state
        entity_id:
          - input_select.set_sg_backup_mode
    conditions: []
    variables:
      enable: 0xAA
      disable: 0x55
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13074 # reg 13075
          value: >
            {% if is_state('input_select.set_sg_backup_mode', "Enabled") %} 
              {{enable}}
            {% elif is_state('input_select.set_sg_backup_mode', "Disabled") %}
              {{disable}}
            {% else %}
              {{disable}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_backup_mode_update"
    alias: "sungrow inverter backup mode mode update"
    description: "Updates Enable/Disable for backup mode"
    triggers:
      - trigger: state
        entity_id:
          - sensor.sg_backup_mode_raw
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.sg_backup_mode_raw', 'unavailable') }}"
    actions:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_sg_backup_mode
        data:
          option: >
            {% if ((states('sensor.sg_backup_mode_raw') |int) == 0xAA) %} 
              Enabled
            {% elif ((states('sensor.sg_backup_mode_raw') |int) == 0x55) %} 
              Disabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_export_power_limit_mode"
    alias: "sungrow inverter export power limit mode"
    description: "Set export power limit mode"
    triggers:
      - trigger: state
        entity_id:
          - input_select.set_sg_export_power_limit_mode
    conditions: []
    variables:
      export_limit_enable: 0xAA
      export_limit_disable: 0x55
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13086 # reg 13087
          value: >
            {% if is_state('input_select.set_sg_export_power_limit_mode', "Enabled") %} 
              {{export_limit_enable}}
            {% elif is_state('input_select.set_sg_export_power_limit_mode', "Disabled") %}
              {{export_limit_disable}}
            {% else %}
              {{export_limit_disable}}
            {% endif %}
    mode: single

  - id: "automation_sungrow_inverter_export_power_limit_update"
    alias: "sungrow inverter export power limit update"
    description: "Updates export power limit slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.export_power_limit
    conditions: []
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_export_power_limit
        data:
          value: "{{ states('sensor.export_power_limit') }}"
    mode: single

  - id: "automation_sungrow_inverter_set_export_power_limit"
    alias: "sungrow inverter export power limit"
    description: "Sets export power limit"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_export_power_limit
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13073 # reg 13074
          value: "{{ states('input_number.set_sg_export_power_limit') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_ems_mode_input_select_update"
    alias: "sungrow inverter update EMS mode input select update"
    description: "Updates EMS mode input select"
    triggers:
      - trigger: state
        entity_id:
          - sensor.ems_mode_selection
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.ems_mode_selection', 'unavailable') }}"
    actions:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_sg_ems_mode
        data:
          option: "{{ states('sensor.ems_mode_selection') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_power"
    alias: "sungrow inverter update battery forced charge discharge power"
    description: "Sets battery forced charge discharge power"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_forced_charge_discharge_power
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 13051 # reg 13052
          value: "{{ states('input_number.set_sg_forced_charge_discharge_power') | int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_forced_charge_discharge_power_input_slider_update"
    alias: "sungrow inverter update battery forced charge discharge power input slider update"
    description: "Updates battery forced charge discharge power input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.battery_forced_charge_discharge_power
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_forced_charge_discharge_power', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_forced_charge_discharge_power
        data:
          value: "{{ states('sensor.battery_forced_charge_discharge_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_charge_power"
    alias: "sungrow inverter update battery max charge power"
    description: "Sets battery max charge power"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_battery_max_charge_power
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33046 # reg 33047
          value: "{{ states('input_number.set_sg_battery_max_charge_power') |float /10 |int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_charge_power_input_slider_update"
    alias: "sungrow inverter update battery max charge power input slider update"
    description: "Updates battery max charge power input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.battery_max_charge_power
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_max_charge_power', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_max_charge_power
        data:
          value: "{{ states('sensor.battery_max_charge_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_discharge_power"
    alias: "sungrow inverter update battery max discharge power"
    description: "Sets battery max discharge power"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_battery_max_discharge_power
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33047 # reg 33048
          value: "{{ states('input_number.set_sg_battery_max_discharge_power')  |float /10 |int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_max_discharge_power_input_slider_update"
    alias: "sungrow inverter update battery max discharge power input slider update"
    description: "Updates battery max discharge power input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.battery_max_discharge_power
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_max_discharge_power', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_max_discharge_power
        data:
          value: "{{ states('sensor.battery_max_discharge_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_charging_start_power"
    alias: "sungrow inverter update battery charging start power"
    description: "Sets battery charging start power"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_battery_charging_start_power
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33148 # reg 33149
          value: "{{ states('input_number.set_sg_battery_charging_start_power') |float /10 |int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_charging_start_power_input_slider_update"
    alias: "sungrow inverter update battery charging start power input slider update"
    description: "Updates battery charging start power input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.battery_charging_start_power
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_charging_start_power', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_charging_start_power
        data:
          value: "{{ states('sensor.battery_charging_start_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_discharging_start_power"
    alias: "sungrow inverter update battery discharging start power"
    description: "Sets battery discharging start power"
    triggers:
      - trigger: state
        entity_id:
          - input_number.set_sg_battery_discharging_start_power
    conditions: []
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33149 # reg 33150
          value: "{{ states('input_number.set_sg_battery_discharging_start_power') |float /10 | int}}"
    mode: single

  - id: "automation_sungrow_inverter_update_battery_discharging_start_power_input_slider_update"
    alias: "sungrow inverter update battery discharging start power input slider update"
    description: "Updates battery discharging start power input slider"
    triggers:
      - trigger: state
        entity_id:
          - sensor.battery_discharging_start_power
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.battery_discharging_start_power', 'unavailable') }}"
    actions:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_sg_battery_discharging_start_power
        data:
          value: "{{ states('sensor.battery_discharging_start_power') }}"
    mode: single

  - id: "automation_sungrow_inverter_global_mpp_scan_manual_update"
    alias: "sungrow inverter global mpp scan manual update"
    description: "Updates Enable/Disable for global mpp scan manual"
    triggers:
      - trigger: state
        entity_id:
          - sensor.global_mpp_scan_manual_raw
    conditions:
      - condition: template
        value_template: "{{ not is_state('sensor.global_mpp_scan_manual_raw', 'unavailable') }}"
    actions:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_sg_global_mpp_scan_manual
        data:
          option: >
            {% if ((states('sensor.global_mpp_scan_manual_raw') | int(default=0)) == 0x00AA) %} 
              Enabled
            {% elif ((states('sensor.global_mpp_scan_manual_raw') | int(default=0)) == 0x0055) %} 
              Disabled
            {% endif %}
    mode: single

  - id: "automation_sungrow_global_mpp_scan_manual"
    alias: "sungrow inverter global mpp scan manual"
    description: "Set global mpp scan manual"
    triggers:
      - trigger: state
        entity_id:
          - input_select.set_sg_global_mpp_scan_manual
    conditions: []
    variables:
      export_limit_enable: 0xAA
      export_limit_disable: 0x55
    actions:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 30229 # reg 30230
          value: >
            {% if is_state('input_select.set_sg_global_mpp_scan_manual', "Enabled") %} 
              {{export_limit_enable}}
            {% elif is_state('input_select.set_sg_global_mpp_scan_manual', "Disabled") %}
              {{export_limit_disable}}
            {% else %}
              {{export_limit_disable}}
            {% endif %}
    mode: single

# Usage: Use these scripts to simplify automations
# Example (Adjust to your needs with appropriate trigger):
# automation:
#  - alias: Forced Battery Charging Management
#    description: "Manages forced battery charging during cheapest hours."
#   triggers:
#      - trigger: state
#        entity_id:
#          - binary_sensor.cheapest_hours_for_charging_timer
#    actions:
#      - choose:
#          - conditions:
#              - condition: state
#                entity_id: binary_sensor.cheapest_hours_for_charging_timer
#                state: 'on'
#            sequence:
#              - action: script.sg_forced_charge_battery_mode
#          - conditions:
#              - condition: state
#                entity_id: binary_sensor.cheapest_hours_for_charging_timer
#                state: 'off'
#            sequence:
#              - action: script.sg_self_consumption_mode

###################################
# automations of charger
###################################

  - id: "automation_sungrow_charger_wb_charging_quantity"
    alias: "charger charging quantity"
    description: "Sets charger charging quantity"
    trigger:
      - platform: state
        entity_id:
          - input_number.set_ac_wb_charging_quantity
    condition:
      - condition: template
        value_template: >-
          {{ states('input_number.set_ac_wb_charging_quantity') | float != states('sensor.charger_wb_charging_quantity') | float }}
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33541 # reg 33542
          value: "{{ states('input_number.set_ac_wb_charging_quantity') | int * 10 }}"
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_charging_quantity
    mode: single

  - id: "automation_sungrow_charger_wb_charging_quantity_input_number_update"
    alias: "charger charging quantity update"
    description: "Sets charger charging quantity"
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.charger_wb_charging_quantity
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.charger_wb_charging_quantity', 'unavailable') }}"
    action:
      - action: input_number.set_value
        target:
          entity_id: input_number.set_ac_wb_charging_quantity
        data:
          value: "{{ states('sensor.charger_wb_charging_quantity') }}"
    mode: single

  - id: "automation_sungrow_charger_wb_charging_power_customized_charge"
    alias: "sungrow charger wb power customized charge"
    description: "Set charger wb wb power customized charge"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_ac_wb_charging_power_customized_charge
    condition:
      - condition: template
        value_template: >-
          {{ states('input_select.set_ac_wb_charging_power_customized_charge') != states('sensor.charging_power_customized_charge') }}
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33544 # reg 33545
          value: >
            {% if is_state('input_select.set_ac_wb_charging_power_customized_charge', "16A 11kW") %} 
              160
            {% elif is_state('input_select.set_ac_wb_charging_power_customized_charge', "14A 9,66kW") %} 
              140
            {% elif is_state('input_select.set_ac_wb_charging_power_customized_charge', "12A 8,28kW") %} 
              120
            {% elif is_state('input_select.set_ac_wb_charging_power_customized_charge', "10A 6,9kW") %} 
              100
            {% elif is_state('input_select.set_ac_wb_charging_power_customized_charge', "8A 5,52kW") %} 
              80
            {% elif is_state('input_select.set_ac_wb_charging_power_customized_charge', "6A 4,14kW") %} 
              60
            {% endif %}
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_charging_power_customized_charge_raw
    mode: single

  - id: "automation_sungrow_charger_wb_charging_power_customized_charge_input_select_update"
    alias: "sungrow charger wb power customized charge input select update"
    description: "Updates Sungrow charger wb power customized charge input select"
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.charger_wb_charging_power_customized_charge_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.charger_wb_charging_power_customized_charge_raw', 'unavailable') }}"
    action:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_ac_wb_charging_power_customized_charge
        data:
          option: "{{ states('sensor.charging_power_customized_charge') }}"
    mode: single

  - id: "automation_sungrow_charger_wb_charging_duration_input_datetime_update"
    alias: "sungrow charger wb charging duration input datetime update"
    description: "Updates Sungrow charger wb charging duration input datetime"
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.charger_wb_charging_duration_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.charger_wb_charging_duration_raw', 'unavailable') }}"
    action:
      - action: input_datetime.set_datetime
        target:
          entity_id: input_datetime.set_ac_wb_charging_duration
        data:
          datetime: "{{ as_datetime(states.sensor.charger_wb_charging_duration_raw.state).date() }} {{ as_datetime(states.sensor.charger_wb_charging_duration_raw.state).time() }}"
    mode: single

  - id: 'automation_set_sungrow_charger_wb_charging_duration'
    alias: set sungrow charger wb charging duration
    description: ''
    trigger:
      - platform: state
        entity_id:
        - input_datetime.set_ac_wb_charging_duration
    condition:
      - condition: template
        value_template: >-
          {{ as_datetime(states.input_datetime.set_ac_wb_charging_duration.state).strftime("%d.%m.%Y %H:%M") != as_datetime(states.sensor.charger_wb_charging_duration_raw.state).strftime("%d.%m.%Y %H:%M") }}
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          address: 33542 # reg 33543
          slave: !secret sungrow_modbus_slave
          value: >
            {% set hexTimestamp = '%0x' % as_timestamp(states('input_datetime.set_ac_wb_charging_duration')+"+00:00") | int %}
            [0x{{ hexTimestamp[4:] }}, 0x{{ hexTimestamp[:4] }}]
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_charging_duration_raw
    mode: single

  - id: "automation_sungrow_charger_wb_customized_charge_start_time_input_datetime_update"
    alias: "sungrow charger wb customized charge start time input datetime update"
    description: "Updates Sungrow charger wb customized charge start time input datetime"
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.charger_wb_customized_charge_start_time_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.charger_wb_customized_charge_start_time_raw', 'unavailable') }}"
    action:
      - action: input_datetime.set_datetime
        target:
          entity_id: input_datetime.set_ac_wb_customized_charge_start_time
        data:
          datetime: "{{ as_datetime(states.sensor.charger_wb_customized_charge_start_time_raw.state).date() }} {{ as_datetime(states.sensor.charger_wb_customized_charge_start_time_raw.state).time() }}"
    mode: single

  - id: 'automation_set_sungrow_charger_wb_customized_charge_start_time'
    alias: set sungrow charger wb customized charge start time
    description: ''
    trigger:
    - platform: state
      entity_id:
      - input_datetime.set_ac_wb_customized_charge_start_time
    condition:
      - condition: template
        value_template: >-
          {{ as_datetime(states.input_datetime.set_ac_wb_customized_charge_start_time.state).strftime("%d.%m.%Y %H:%M") != as_datetime(states.sensor.charger_wb_customized_charge_start_time_raw.state).strftime("%d.%m.%Y %H:%M") }}
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          address: 33545 # reg 33546
          slave: !secret sungrow_modbus_slave
          value: >
            {% set hexTimestamp = '%0x' % as_timestamp(states('input_datetime.set_ac_wb_customized_charge_start_time')+"+00:00") | int %}
            [0x{{ hexTimestamp[4:] }}, 0x{{ hexTimestamp[:4] }}]
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_customized_charge_start_time_raw
    mode: single

  - id: "automation_sungrow_charger_wb_customized_charge_end_time_input_datetime_update"
    alias: "sungrow charger wb customized charge end time input datetime update"
    description: "Updates Sungrow charger wb customized charge end time input datetime"
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.charger_wb_customized_charge_end_time_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.charger_wb_customized_charge_end_time_raw', 'unavailable') }}"
    action:
      - action: input_datetime.set_datetime
        target:
          entity_id: input_datetime.set_ac_wb_customized_charge_end_time
        data:
          datetime: "{{ as_datetime(states.sensor.charger_wb_customized_charge_end_time_raw.state).date() }} {{ as_datetime(states.sensor.charger_wb_customized_charge_end_time_raw.state).time() }}"
    mode: single

  - id: 'automation_set_sungrow_charger_wb_customized_charge_end_time'
    alias: set sungrow charger wb customized charge end time
    description: ''
    trigger:
    - platform: state
      entity_id:
      - input_datetime.set_ac_wb_customized_charge_end_time
    condition:
      - condition: template
        value_template: >-
          {{ as_datetime(states.input_datetime.set_ac_wb_customized_charge_end_time.state).strftime("%d.%m.%Y %H:%M") != as_datetime(states.sensor.charger_wb_customized_charge_end_time_raw.state).strftime("%d.%m.%Y %H:%M") }}
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          address: 33547 # reg 33548
          slave: !secret sungrow_modbus_slave
          value: >
            {% set hexTimestamp = '%0x' % as_timestamp(states('input_datetime.set_ac_wb_customized_charge_end_time')+"+00:00") | int %}
            [0x{{ hexTimestamp[4:] }}, 0x{{ hexTimestamp[:4] }}]
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_customized_charge_end_time_raw
    mode: single

  - id: "automation_sungrow_charger_wb_charging_mode"
    alias: "sungrow charger wb charging mode"
    description: "Set charger wb charging mode"
    trigger:
      - platform: state
        entity_id:
          - input_select.set_ac_wb_charging_mode
    condition:
      - condition: template
        value_template: >-
          {{ states('input_select.set_ac_wb_charging_mode') != states('sensor.charging_mode') }}
    variables:
      fast_charging: 0xA0 #160 #Fast charging
      surplus_charging: 0xA1 #161 #Surplus charging
      preset_charging: 0xA2 #162 #Preset charging
      customized_charging: 0xA3 #163 #Customized charging
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33540 # reg 33541
          value: >
            {% if is_state('input_select.set_ac_wb_charging_mode', "Fast charging") %} 
              {{fast_charging}}
            {% elif is_state('input_select.set_ac_wb_charging_mode', "Surplus charging") %} 
              {{surplus_charging}}
            {% elif is_state('input_select.set_ac_wb_charging_mode', "Preset charging") %} 
              {{preset_charging}}
            {% elif is_state('input_select.set_ac_wb_charging_mode', "Customized charging") %} 
              {{customized_charging}}
            {% endif %}
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_charging_mode_raw
    mode: single

  - id: "automation_sungrow_charger_wb_charging_mode_input_select_update"
    alias: "sungrow charger wb_charging mode input select update"
    description: "Updates Sungrow charger wb charging mode input select"
    trigger:
      - platform: homeassistant
        event: start
      - platform: state
        entity_id:
          - sensor.charger_wb_charging_mode_raw
    condition:
      - condition: template
        value_template: "{{ not is_state('sensor.charger_wb_charging_mode_raw', 'unavailable') }}"
    action:
      - action: input_select.select_option
        target:
          entity_id: input_select.set_ac_wb_charging_mode
        data:
          option: "{{ states('sensor.charging_mode') }}"
    mode: single

  - id: 'automation_set_ac_wb_surplus_power_from_grid_input_select_update'
    alias: toggle input for charger surplus power from grid
    description: ''
    trigger:
    - platform: homeassistant
      event: start
    - platform: state
      entity_id:
      - sensor.charger_wb_surplus_power_from_grid_raw
    condition: []
    action:
    - if:
      - condition: state
        entity_id: sensor.charger_wb_surplus_power_from_grid_raw
        state: '170'
      then:
      - action: input_boolean.turn_on
        data: {}
        target:
          entity_id: input_boolean.set_ac_wb_surplus_power_from_grid
      else:
      - action: input_boolean.turn_off
        data: {}
        target:
          entity_id: input_boolean.set_ac_wb_surplus_power_from_grid
    mode: single

  - id: 'automation_ac_wb_surplus_power_from_grid_set_power_from_grid'
    alias: enable power from grid for charger surplus mode
    description: ''
    trigger:
    - platform: state
      entity_id:
      - input_boolean.set_ac_wb_surplus_power_from_grid
      to: 'on'
    condition:
    - condition: state
      entity_id: sensor.charger_wb_surplus_power_from_grid_raw
      state: '85'
    action:
      - action: modbus.write_register
        data:
          hub: SungrowSHx
          address: 33549 # reg 33550
          slave: !secret sungrow_modbus_slave
          value: 170
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_surplus_power_from_grid_raw
    mode: single

  - id: 'automation_ac_wb_surplus_power_from_grid_set_no_power_from_grid'
    alias: disable power from grid for charger surplus mode
    description: ''
    trigger:
    - platform: state
      entity_id:
      - input_boolean.set_ac_wb_surplus_power_from_grid
      to: 'off'
    condition:
    - condition: state
      entity_id: sensor.charger_wb_surplus_power_from_grid_raw
      state: '170'
    action:
      - action: modbus.write_register
        data:
          hub: SungrowSHx
          address: 33549 # reg 33550
          slave: !secret sungrow_modbus_slave
          value: 85
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_surplus_power_from_grid_raw
    mode: single

  - id: "automation_ac_wb_start_charging"
    alias: "start charging via inverter"
    description: ""
    trigger:
      - platform: state
        entity_id:
          - input_button.set_ac_wb_start_charging
    condition:
      - condition: template
        value_template: >-
          {{ states('sensor.charger_wb_charging_enabled_raw') | int != start_charging }}
    variables:
      start_charging: 170
      stop_charging: 85
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33539 # reg 33540
          value: >
              {{start_charging}}
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_charging_enabled_raw
    mode: single

  - id: "automation_ac_wb_stop_charging"
    alias: "stop charging via inverter"
    description: ""
    trigger:
      - platform: state
        entity_id:
          - input_button.set_ac_wb_stop_charging
    condition:
      - condition: template
        value_template: >-
          {{ states('sensor.charger_wb_charging_enabled_raw') | int != stop_charging }}
    variables:
      start_charging: 170
      stop_charging: 85
    action:
      - action: modbus.write_register
        data_template:
          hub: SungrowSHx
          slave: !secret sungrow_modbus_slave
          address: 33539 # reg 33540
          value: >
              {{stop_charging}}
      - delay:
          hours: 0
          minutes: 0
          seconds: 10
          milliseconds: 0
      - action: homeassistant.update_entity
        data: {}
        target:
          entity_id: sensor.charger_wb_charging_enabled_raw
    mode: single
    
  - id: "automation_ac_wb_stop_charging_by_soc"
    alias: "stop charging via inverter by soc"
    description: ""
    trigger:
      - platform: numeric_state
        entity_id:
          - sensor.battery_level
        below: input_number.set_ac_wb_stop_by_soc_percentage
    condition:
      - condition: state
        entity_id: input_boolean.set_ac_wb_stop_by_soc_enabled
        state: "on"
      - condition: state
        state: "170"
        entity_id: sensor.charger_wb_charging_enabled_raw
      - condition: state
        state: "161"
        entity_id: sensor.charger_wb_charging_mode_raw
    action:
      - action: automation.trigger
        target:
          entity_id: automation.stop_charging_via_inverter
        data:
          skip_condition: true
    mode: single
    
  - id: "automation_ac_wb_start_charging_by_soc"
    alias: "start charging via inverter by soc"
    description: ""
    trigger:
      - platform: numeric_state
        entity_id:
          - sensor.battery_level
        above: input_number.set_ac_wb_start_by_soc_percentage
    condition:
      - condition: state
        entity_id: input_boolean.set_ac_wb_start_by_soc_enabled
        state: "on"
      - condition: state
        state: "85"
        entity_id: sensor.charger_wb_charging_enabled_raw
      - condition: state
        state: "161"
        entity_id: sensor.charger_wb_charging_mode_raw
    action:
      - action: automation.trigger
        target:
          entity_id: automation.start_charging_via_inverter
        data:
          skip_condition: true
    mode: single

###################################
# end of automations of charger
###################################

script:
  sg_set_forced_discharge_battery_mode:
    sequence:
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_ems_mode
          option: "Forced mode"
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
          option: "Forced discharge"
      # Uncomment notify action lines below for push notifications to mobile devices
      # - action: notify.notify
      #   data:
      #     title: "Forced Battery Discharge"
      #     message: "Switched to Forced Battery Discharge mode"

  sg_set_forced_charge_battery_mode:
    sequence:
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_ems_mode
          option: "Forced mode"
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
          option: "Forced charge"

  sg_set_battery_bypass_mode:
    sequence:
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_ems_mode
          option: "Forced mode"
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
          option: "Stop (default)"

  sg_set_self_consumption_mode:
    sequence:
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_ems_mode
          option: "Self-consumption mode (default)"
      - action: input_select.select_option
        data:
          entity_id: input_select.set_sg_battery_forced_charge_discharge_cmd
          option: "Stop (default)"