3dr radios sending corrupted data

[sonyccd]

Using Reach View 2.2.5

I have connected 3dr radios to the uart port on the reach. When I start up the reach the two radios lock. The base station is sending corrections. The rover is not saying it has them but the radio shows to is getting the packets. When I directly connect to the rovers radio I see garbage data coming in. I then shut off the correction broadcasting on the base and sshed into it. So make sure this was not something with the data itself I typed directly to the radio from the rover radio and was seeing the correct text but when i typed on the base radio it got to the rover as garbage. If I connect to the two radios via usb and type into them it works. This is happening also with another pair of radios. I have also tried multiple configurations in the radio settings. Has anyone had anything like this happen?

https://community.emlid.com/t/3dr-radios-not-sending-data-correctly/5184/5

[sonyccd]

Removed the RTS and CTS and the problem is still there. Going to try everything with a different reach.