Skip to content

Latest commit

 

History

History
81 lines (66 loc) · 2.32 KB

README.md

File metadata and controls

81 lines (66 loc) · 2.32 KB

ESP32 ESP-IDF and ESP8266 RTOS SDK component for BH1750 ambient light sensor

Tested on

  1. ESP8266 RTOS_SDK v3.4
  2. ESP32 ESP-IDF v5.2

Features

  1. Recorded illuminance values from 0.11 to 121241 lux (depends on operation mode and sensitivity).
  2. Support automatically sensitivity adjustment.

Using

In an existing project, run the following command to install the component:

cd ../your_project/components
git clone https://github.com/aZholtikov/zh_bh1750.git

In the application, add the component:

#include "zh_bh1750.h"

Example

Reading the sensor:

#include "zh_bh1750.h"

#define I2C_PORT (I2C_NUM_MAX - 1)

void app_main(void)
{
    esp_log_level_set("zh_bh1750", ESP_LOG_NONE);
#ifdef CONFIG_IDF_TARGET_ESP8266
    i2c_config_t i2c_config = {
        .mode = I2C_MODE_MASTER,
        .sda_io_num = GPIO_NUM_4, // In accordance with used chip.
        .sda_pullup_en = GPIO_PULLUP_ENABLE,
        .scl_io_num = GPIO_NUM_5, // In accordance with used chip.
        .scl_pullup_en = GPIO_PULLUP_ENABLE,
    };
    i2c_driver_install(I2C_PORT, i2c_config.mode);
    i2c_param_config(I2C_PORT, &i2c_config);
#else
    i2c_master_bus_config_t i2c_bus_config = {
        .clk_source = I2C_CLK_SRC_DEFAULT,
        .i2c_port = I2C_PORT,
        .scl_io_num = GPIO_NUM_22, // In accordance with used chip.
        .sda_io_num = GPIO_NUM_21, // In accordance with used chip.
        .glitch_ignore_cnt = 7,
        .flags.enable_internal_pullup = true,
    };
    i2c_master_bus_handle_t i2c_bus_handle;
    i2c_new_master_bus(&i2c_bus_config, &i2c_bus_handle);
#endif
    zh_bh1750_init_config_t bh1750_init_config = ZH_BH1750_INIT_CONFIG_DEFAULT();
    bh1750_init_config.auto_adjust = true;  // Just for an example of how to enable auto adjustment the sensor sensitivity.
#ifdef CONFIG_IDF_TARGET_ESP8266
    bh1750_init_config.i2c_port = I2C_PORT;
#else
    bh1750_init_config.i2c_handle = i2c_bus_handle;
#endif
    zh_bh1750_init(&bh1750_init_config);
    zh_bh1750_adjust(69); // Just for an example of how to change the sensor sensitivity. Don’t work if auto adjustment is enabled.
    float lux = 0.0;
    for (;;)
    {
        zh_bh1750_read(&lux);
        printf("Lux %0.2f\n", lux);
        vTaskDelay(5000 / portTICK_PERIOD_MS);
    }
}

Any feedback will be gladly accepted.