- Getting Started
- Electronics
- Structural Assembly
- Acrylic Case
- Printed Case
- Plate Case
- Parts list (BOM)
To keep oriented during througout this guide, here is a photo of everything put together without the case.
For the printed version of the case, you'll need four pieces in total. You can find all the .stl files in the /case/printed. They should all print easily and don't require supports. Since they are pretty much all walls/flat surfaces, you can print with high-infill for weight and it won't take much longer.
- 1 x middle_top_a.stl
- 1 x top_b.stl
- 1 x top_c.stl
The middle_top piece slides over the stand-offs. Depending on your printer quality/settings you might need to drill out some of the holes to the proper diameter.
To finish up, the two other top pieces stack on top and you can secure everything with the various lengths of screws.
There ya go! Make sure you seat the lens properly, drop in the ball and plug it in. Feel free to contact me with any questions on building, flashing or aquiring parts. If you do build on of these I'd love to see it.