config.yaml

meta:
  keyboard: &keyboard_name One Up Chuck
  author: chad@transtrum.net
  version: &version v1.2
  repository: &repo https://github.com/ctranstrum/chuck
  license: &license Licensed under CERN-OHL-P v2

  # Depending on where you are ordering from, uncomment or edit one of these:
  # order_num_template: &order_text JLCJLCJLCJLC # for ordering from JLCpcb.com
  # order_num_template: &order_text WayWayWay    # for ordering from PCBway.com
  order_num_template: &order_text "" # remove the order number text completely

units:
  dx: u
  dy: u

  hdx: dx / 2
  hdy: dy / 2

  knob_diameter: 25
  # how far to drop the outside edge of the knob, knob diameter must be larger than 21
  knob_skirt: 2

  ec11_knob_height: 17
  ec11_shaft_height: 7
  ec12_knob_height: 16
  ec12_shaft_height: 2.65

  mirrored_distance: 1.5 dx

points:
  zones:
    matrix:
      # Shift the PCB down and to the right to get it on the sheet in kicad
      anchor.shift: [50, -100]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance
      key:
        autobind: .5
        tags: [key, switch]
      columns:
        pinky:
          key:
            cpdst: CP0
            splay: -10
            mirror.cpdst: CP5
          rows:
            bottom:
              cpsrc: CP1
              bind: [0, 45, 0, 0]
              tags: [key, switch, low_bumper]
            home:
              cpsrc: CP2
              tags: [key, switch]
              shared: pinky_bottom
              mirror.shared: mirror_pinky_bottom
            top:
              orient: -5
              shift: [3, 3]
              cpsrc: CP3
              tags: [key, switch, high_bumper]
              bind: [0, 4]
        ring:
          key:
            stagger: 2/3 dx
            spread: 1.05 dx
            splay: -5
            cpdst: CP0
            mirror.cpdst: CP5
          rows:
            bottom:
              cpsrc: CP4
              tags: [key, switch, return]
            home:
              cpsrc: CP5
              tags: [key, switch]
              shared: ring_bottom
              mirror:
                cpsrc: CP0
                shared: mirror_ring_bottom
            top:
              cpdst: CP1
              cpsrc: CP0
              mirror.cpdst: CP4
              tags: [key, switch]
        middle:
          key:
            stagger: hdx
            spread: 1.04 dx
            splay: -5
            cpdst: CP1
            mirror.cpdst: CP4
          rows:
            bottom:
              cpsrc: CP2
              tags: [key, switch, return]
              shared: index_bottom
              mirror.shared: mirror_index_bottom
            home:
              cpsrc: CP3
            top:
              cpsrc: CP4
              tags: [key, switch, high_bumper]
              bind: [0, 4]
              shared: middle_home
              mirror:
                cpsrc: CP1
                shared: mirror_middle_home
        index:
          key:
            stagger: -hdx
            splay: -2.5
            cpdst: CP2
            mirror.cpdst: CP3
          rows:
            bottom:
              cpdst: CP1
              cpsrc: CP5
              mirror.cpdst: CP4
            home:
              cpsrc: CP0
            top:
              cpsrc: CP1
              tags: [key, switch]
              shared: index_home
              mirror.shared: mirror_index_home
        inner:
          key:
            stagger: 2/3 hdx
            cpdst: CP2
            mirror.cpdst: CP3
          rows:
            bottom:
              cpsrc: CP3
              mirror.cpsrc: CP2
              tags: [key, switch, return]
            home:
              cpsrc: CP4
              tags: [key, switch]
              shared: inner_bottom
              mirror.shared: mirror_inner_bottom

    thumbs:
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance
      anchor: matrix_index_bottom
      columns.thumb.rows.spot:
        tags: [thumb, switch]
        splay: -20
        shift: [39.5, -10.5]
        bind: [7, 0, 0, 25]
        cpdst: CP2
        cpsrc: CP5
        mirror.cpdst: CP3

    encoder:
      anchor:
        aggregate.parts: [thumbs_thumb_spot, mirror_thumbs_thumb_spot]
        shift: [0, dx]
      key:
        tags: [encoder]
        bind: [25, 6, 25.3, 6]

    mcu:
      key.tags: [mcu]
      anchor:
        # top middle left
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [-21, 7.45]

    power:
      key.tags: [power]
      anchor:
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [28, 15.8]

    reset:
      key:
        tags: [reset]
        asym: clone
      anchor:
        ref: matrix_pinky_top
        shift: [hdx / 3, hdy + 4]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    battery:
      anchor:
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [4, -8]
      key.tags: [battery]

    palm_bumper:
      key.tags: [bumper]
      anchor:
        ref: matrix_index_bottom
        shift: [0, -17]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    thumb_bumper:
      key.tags: [bumper]
      anchor:
        ref: encoder
        shift: [0, -1.7 dy]

    center_bumper:
      key.tags: [bumper]
      anchor:
        ref: encoder
        shift: [0, 1.9 dy]

    pinky_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_pinky_home
        shift: [-hdx / 2, hdy + 1.6]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    low_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_pinky_bottom
        shift: [hdy + 2, -hdy + 2]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    middle_home_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_middle_home
        shift: [-hdx - 1.5, hdy]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    middle_top_screw:
      key.tags: [screw]
      anchor:
        ref: matrix_middle_top
        shift: [0, hdy + 4]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    thumb_screw:
      key.tags: [screw]
      anchor:
        ref: thumbs_thumb_spot
        shift: [-hdx - 2, -hdy + 3]
      mirror:
        ref: matrix_inner_home
        distance: mirrored_distance

    center_bottom_screw:
      key.tags: [screw]
      anchor:
        ref: encoder
        shift: [0, -1.3 dy]

    center_top_screw:
      key.tags: [screw]
      anchor:
        ref: battery
        shift: [-4, 22]

    pad_xiao_pos:
      key.tags: [pad_circle, xiao_pos_pad]
      anchor:
        ref: mcu
        shift: [-4, -13.75]

    pad_reset:
      key.tags: [pad_circle, reset_pad]
      anchor:
        ref: mcu
        shift: [4, -13.75]

    pad_bat_pos:
      key.tags: [pad_circle, bat_pos_pad]
      anchor:
        ref: battery
        rotate: 270
        shift: [13, 6]

    pad_neg_pos:
      key.tags: [pad_circle, bat_neg_pad]
      anchor:
        ref: battery
        shift: [16.5, 11]

outlines:
  _top_bridge:
    - what: rectangle
      where:
        aggregate.parts: [matrix_middle_top, mirror_matrix_middle_top]
        shift: [0, -7.05]
      size: [95, 50]

  _keys_surround:
    - what: rectangle
      where: [key, encoder]
      bound: true
      size: [dx + 4, dy + 4]
      corner: 2
      fillet: 2

  _thumbs_surround:
    - what: rectangle
      where: thumb
      bound: true
      size: [1.5 dx + 4, dy + 4]
      corner: 4
      fillet: 2

  outline_shapes_builder:
    - _top_bridge
    - ^_keys_surround
    - ^_thumbs_surround

  _basic_outline_shape:
    - _top_bridge
    - _keys_surround
    - _thumbs_surround

  board_outline:
    - what: outline
      name: _basic_outline_shape
      fillet: 2

  _xiao_visualizer:
    - what: rectangle
      where: mcu
      size: [17.8, 21]
      corner: 2
    - what: rectangle
      where: mcu
      size: [8, 2]
      adjust.shift: [0, 11.5]

  _xiao_light_guide:
    - what: circle
      where: mcu
      radius: 0.95
      adjust.shift: [6, 7.5]

  _xiao_cutout:
    - what: rectangle
      where: mcu
      size: [14, 22]
      corner: 1

  _xiao_bottom_cutout:
    - what: rectangle
      where: mcu
      size: [14, 25]
      adjust.shift: [0, -4]

  _xiao_cutout_wall:
    - what: rectangle
      where: mcu
      size: [19, 21.5]
      corner: 1

  _xiao_usb:
    - what: rectangle
      where: mcu
      size: [9.5, 6.5]
      adjust.shift: [0, 7.25]

  _xiao_chip:
    - what: rectangle
      where: mcu
      size: [13, 12]
      adjust.shift: [0, -2]

  _power_pcb_holes:
    - what: circle
      where: power
      radius: 0.45
      adjust.shift: [-1.5, 0]
    - what: circle
      where: power
      radius: 0.45
      adjust.shift: [1.5, 0]

  _power_visualizer:
    - what: rectangle
      where: power
      size: [8, 3.9]
    - what: rectangle
      where: power
      size: 1.3
      adjust.shift: [1.5, 2.6]
    - -_power_pcb_holes

  _power_cutout:
    - what: rectangle
      where: power
      size: [9, 4.7]
      adjust.shift: [0, -0.2]

  _reset_pcb_holes:
    - what: circle
      where: reset
      radius: 0.375
      adjust.shift: [0, 1.375]
    - what: circle
      where: reset
      radius: 0.375
      adjust.shift: [0, -1.375]

  _reset_visualizer:
    - what: rectangle
      where: reset
      size: [6.3, 3.6]
      adjust.resist: true
    - what: rectangle
      where: reset
      size: [2.55, 0.9]
      adjust:
        shift: [0, 2.05]
        resist: true
    - -_reset_pcb_holes

  _reset_cutout:
    - what: rectangle
      where: reset
      size: [7.3, 4.5]
      adjust:
        resist: true
        shift: [0, -0.25]

  _battery_cutout:
    - what: rectangle
      where: battery
      size: [23, 33]
      corner: 1

  _battery_wire_cutout:
    - _battery_cutout
    - what: circle
      where: battery
      radius: 7.5
      adjust.shift: [11, 11]

  _encoder_knob_1:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 1

  _encoder_knob_2:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.8

  _encoder_knob_3:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.6

  _encoder_knob_4:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.4

  _encoder_knob_5:
    - what: circle
      where: encoder
      radius: knob_diameter / 2 - 0.2

  _encoder_knob:
    - what: circle
      where: encoder
      radius: knob_diameter / 2

  _encoder_knob_skirt:
    - what: circle
      where: encoder
      radius: 10.5

  _encoder_stem:
    - what: circle
      where: encoder
      radius: 3
    - what: rectangle
      where: encoder
      size: 3.1
      adjust.shift: [0, 3.1]
      operation: subtract

  _encoder_stem_opening_1:
    - what: outline
      name: _encoder_stem
      expand: 0.1

  _encoder_stem_opening_2:
    - what: outline
      name: _encoder_stem
      expand: 0.2

  _encoder_screw_shaft:
    - what: circle
      where: encoder
      radius: 3.6

  _keycaps:
    - what: rectangle
      where: key
      size: 18
      corner: 1
    - what: rectangle
      where: thumb
      size: [27, 18]
      corner: 1

  top_down_view:
    - board_outline
    - _xiao_visualizer
    - _power_visualizer
    - _reset_visualizer
    - -_keycaps
    - -_encoder_knob
    - -_xiao_light_guide

  _encoder_plate_cutout:
    - what: rectangle
      where: encoder
      size: [12.4, 13.2]
    - what: rectangle
      where: encoder
      size: [6.1, 1.2]
      adjust.shift: [0, -7.2]

  _encoder_plate_cutout_expanded:
    - what: outline
      name: _encoder_plate_cutout
      expand: 1

  _diode:
    - what: rectangle
      size: [1.65, 2.7]
    - what: rectangle
      size: [0.6, 3.9]

  _diodes:
    - what: outline
      name: _diode
      where: switch
      adjust.shift: [5, -1]

  _diodes_cutout:
    - what: rectangle
      where: switch
      size: [2.2, 5.2]
      adjust.shift: [5, -1]

  _return_diodes:
    - what: outline
      name: _diode
      where: return
      adjust:
        shift: [0, -0.6 dy]
        rotate: 90
    - what: outline
      name: _diode
      where: return
      adjust:
        shift: [0, -0.75 dy]
        rotate: 90

  _return_diodes_cutout:
    - what: rectangle
      where: return
      size: 5.2
      adjust.shift: [0, -0.675 dy]

  _switches_plate_cutout:
    - what: rectangle
      where: switch
      size: 14
      corner: 1
    - _encoder_plate_cutout

  _switches_clip_cutout:
    - what: rectangle
      where: switch
      size: [14.7, 14]
      corner: 1

  # Ugh, I don't have exact measurements, so this is maybe close-ish?
  _glp_socket:
    - what: rectangle
      size: [4.04, 4.35]
      adjust.shift: [4.8, 4.7]
    - what: rectangle
      size: [1.75, 1.74]
      adjust.shift: [7.65, 4.7]
    - what: rectangle
      size: [5.94, 4.35]
      adjust.shift: [-1.85, 5.75]
    - what: rectangle
      size: [1.75, 1.74]
      adjust.shift: [-5.65, 5.75]
    - what: rectangle
      size: [4.2, 3.8]
      adjust:
        rotate: -30
        shift: [1.95, 5.2]
    - what: rectangle
      size: 1.5
      adjust.shift: [0, 8]
      operation: subtract

  _glp_socket_expanded:
    - what: outline
      name: _glp_socket
      expand: 1

  _socket_visualizer:
    - what: outline
      name: _glp_socket
      where: switch
      adjust.resist: true

  _socket_cutout:
    - what: outline
      name: _glp_socket_expanded
      where: switch
      adjust.resist: true

  _socket_post_holes:
    - what: circle
      where: switch
      radius: 2.55

  # This is only needed for visualization of the pcb_outline
  _socket_pcb_holes:
    - _socket_post_holes
    - what: circle
      where: switch
      radius: 1.5
      adjust:
        resist: true
        shift: [-2.6, 5.75]
    - what: circle
      where: switch
      radius: 1.5
      adjust:
        resist: true
        shift: [4.4, 4.7]

  _encoder_pcb_holes:
    # This is just an approximation of the encoder mounting holes
    - what: circle
      where: encoder
      radius: 1.15
      adjust.shift: [-5.6, 0]
    - what: circle
      where: encoder
      radius: 1.15
      adjust.shift: [5.6, 0]
    - what: circle
      where: encoder
      radius: 0.8
      adjust.shift: [-2.5, -7.5]
    - what: circle
      where: encoder
      radius: 0.8
      adjust.shift: [0, -7.5]
    - what: circle
      where: encoder
      radius: 0.8
      adjust.shift: [2.5, -7.5]

  _encoder_bottom_cutout:
    - what: circle
      where: encoder
      radius: 2
      adjust.shift: [-5.6, 0]
    - what: circle
      where: encoder
      radius: 2
      adjust.shift: [5.6, 0]
    - what: rectangle
      where: encoder
      size: [9, 4]
      adjust.shift: [0, -7.2]
    - what: circle
      where: encoder
      radius: 1.5
      adjust.shift: [2.5, 7]
    - what: circle
      where: encoder
      radius: 1.5
      adjust.shift: [-2.5, 7]

  _pad_cutout:
    - what: circle
      where: pad_circle
      radius: 1.5

  _screw_shaft:
    - what: circle
      where: screw
      radius: 1.2

  _countersink1:
    - what: outline
      name: _screw_shaft
      expand: 1

  _countersink2:
    - what: outline
      name: _screw_shaft
      expand: 0.8

  _countersink3:
    - what: outline
      name: _screw_shaft
      expand: 0.6

  _countersink4:
    - what: outline
      name: _screw_shaft
      expand: 0.4

  _countersink5:
    - what: outline
      name: _screw_shaft
      expand: 0.2

  pcb_outline:
    - board_outline
    - -_xiao_cutout
    - -_battery_cutout

  _hex_nut_angle:
    - what: rectangle
      size: [2.45, 4.25]

  _hex_nut:
    - _hex_nut_angle
    - what: outline
      name: _hex_nut_angle
      adjust.rotate: 60
    - what: outline
      name: _hex_nut_angle
      adjust.rotate: -60

  _hex_nuts:
    - what: outline
      name: _hex_nut
      where: screw

  _bumper:
    - what: circle
      radius: 3.1

  _low_bumper:
    - what: outline
      name: _bumper
      where: low_bumper
      adjust.shift: [-7, -7]

  _high_bumper:
    - what: outline
      name: _bumper
      where: high_bumper
      adjust.shift: [-7, 11]

  _bumpers:
    - what: outline
      name: _bumper
      where: bumper

  _all_bumpers:
    - _low_bumper
    - _high_bumper
    - _bumpers

  top_plate:
    - board_outline
    - -_switches_plate_cutout
    - ^_switches_clip_cutout
    - ^_encoder_plate_cutout_expanded
    - ^_battery_cutout
    - -_xiao_light_guide
    - ^_xiao_usb
    - ^_xiao_chip
    - ^_hex_nuts

  component_visualization:
    - board_outline
    - ^_xiao_cutout
    - ^_switches_plate_cutout
    - ^_switches_clip_cutout
    - ^_socket_visualizer
    - ^_socket_pcb_holes
    - ^_keycaps
    - -_encoder_knob
    - ^_xiao_visualizer
    - ^_xiao_light_guide
    - ^_power_visualizer
    - ^_power_cutout
    - ^_reset_visualizer
    - ^_reset_cutout
    - ^_battery_wire_cutout
    - ^_pad_cutout
    - ^_hex_nuts
    - ^_screw_shaft
    - ^_all_bumpers
    - ^_diodes
    - ^_diodes_cutout
    - ^_return_diodes
    - ^_return_diodes_cutout

  # There is probably a better way to do this, but:
  # try to select everything outside of the center,
  # so we can remove it and be left with the center...
  _dovetail_negative_space:
    - what: rectangle
      where: /^m.*_pinky/
      size: 1.6 dx + 2
    - what: rectangle
      where: /^m.*_ring/
      size: 1.6 dx + 2
    - what: rectangle
      where: /middle_home$/
      size: [dx, 3 dy]
    - what: rectangle
      where: /^m.*_middle_top$/
      size: [dx, dy]
      adjust.shift: [-0.5dx, 0]
    - what: rectangle
      where: /index_home/
      size: [dx, 3 dy]
      corner: 3
    - what: rectangle
      where: /index_home/
      size: [dx, 3 dy]
      adjust.shift: [-0.5 dx, 0]
    - what: rectangle
      where: /^m.*_bottom/
      size: [dx, 3 dy]
    - what: rectangle
      where: /^m.*_bottom/
      size: [dx, 3 dy]
      adjust.shift: [0, -2 dy]
    - what: rectangle
      where: /thumb_spot/
      size: [dx, dy]
    - what: rectangle
      where: /thumb_spot/
      size: [dx, dy]
      adjust.shift: [-0.1, -0.5 dy]

  _dovetail:
    - board_outline
    - -_dovetail_negative_space

  _dovetail_1:
    - what: outline
      name: _dovetail
      expand: 0.2
    - ~board_outline

  _dovetail_2:
    - what: outline
      name: _dovetail
      expand: 0.4
    - ~board_outline

  _dovetail_3:
    - what: outline
      name: _dovetail
      expand: 0.6
    - ~board_outline

  _dovetail_4:
    - what: outline
      name: _dovetail
      expand: 0.8
    - ~board_outline

  _left_half:
    - what: rectangle
      where: matrix_middle_bottom
      size: [115, 150]
      adjust.rotate: 20

  _right_half:
    - what: rectangle
      where: mirror_matrix_middle_bottom
      size: [115, 150]
      adjust.rotate: 20

  dovetail_visualizer:
    - board_outline
    - ^_dovetail
    - ^_left_half
    - ^_right_half

cases:
  _countersunk_screw:
    - what: outline
      name: _countersink1
      extrude: 0.2
    - what: outline
      name: _countersink2
      extrude: 0.2
      shift: [0, 0, 0.2]
    - what: outline
      name: _countersink3
      extrude: 0.2
      shift: [0, 0, 0.4]
    - what: outline
      name: _countersink4
      extrude: 0.2
      shift: [0, 0, 0.6]
    - what: outline
      name: _countersink5
      extrude: 0.2
      shift: [0, 0, 0.8]
    - what: outline
      name: _screw_shaft
      extrude: 2
      shift: [0, 0, 1]

  _encoder_knob_bevel:
    - what: outline
      name: _encoder_knob_1
      extrude: 0.2
    - what: outline
      name: _encoder_knob_2
      extrude: 0.2
      shift: [0, 0, 0.2]
    - what: outline
      name: _encoder_knob_3
      extrude: 0.2
      shift: [0, 0, 0.4]
    - what: outline
      name: _encoder_knob_4
      extrude: 0.2
      shift: [0, 0, 0.6]
    - what: outline
      name: _encoder_knob_5
      extrude: 0.2
      shift: [0, 0, 0.8]

  ec11_encoder_knob:
    - _encoder_knob_bevel
    - what: outline
      name: _encoder_knob
      extrude: ec11_knob_height - 2
      shift: [0, 0, 1]
    - what: outline
      name: _encoder_knob_5
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 1]
    - what: outline
      name: _encoder_knob_4
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.8]
    - what: outline
      name: _encoder_knob_3
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.6]
    - what: outline
      name: _encoder_knob_2
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.4]
    - what: outline
      name: _encoder_knob_1
      extrude: 0.2
      shift: [0, 0, ec11_knob_height - 0.2]
    - what: outline
      name: _encoder_stem
      extrude: ec11_shaft_height - 0.4
      shift: [0, 0, 1]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_1
      extrude: 0.2
      shift: [0, 0, ec11_shaft_height + 0.6]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_2
      extrude: 0.2
      shift: [0, 0, ec11_shaft_height + 0.8]
      operation: subtract
    - what: outline
      name: _encoder_screw_shaft
      extrude: ec11_knob_height - ec11_shaft_height - 2
      shift: [0, 0, ec11_shaft_height + 1]
      operation: subtract
    - what: outline
      name: _encoder_knob_skirt
      extrude: knob_skirt
      shift: [0, 0, ec11_knob_height - knob_skirt]
      operation: subtract

  ec12_encoder_knob:
    - _encoder_knob_bevel
    - what: outline
      name: _encoder_knob
      extrude: ec12_knob_height - 2
      shift: [0, 0, 1]
    - what: outline
      name: _encoder_knob_5
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 1]
    - what: outline
      name: _encoder_knob_4
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.8]
    - what: outline
      name: _encoder_knob_3
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.6]
    - what: outline
      name: _encoder_knob_2
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.4]
    - what: outline
      name: _encoder_knob_1
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.2]
    - what: outline
      name: _encoder_stem
      extrude: ec12_shaft_height - 0.4 + knob_skirt
      shift: [0, 0, ec12_knob_height - ec12_shaft_height - knob_skirt]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_1
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.4 - knob_skirt]
      operation: subtract
    - what: outline
      name: _encoder_stem_opening_2
      extrude: 0.2
      shift: [0, 0, ec12_knob_height - 0.2 - knob_skirt]
      operation: subtract
    - what: outline
      name: _encoder_knob_skirt
      extrude: knob_skirt
      shift: [0, 0, ec12_knob_height - knob_skirt]
      operation: subtract

  bottom_case:
    - what: outline
      name: board_outline
      extrude: 3
    - what: outline
      name: _socket_cutout
      extrude: 2
      shift: [0, 0, 1]
      operation: subtract
    - what: outline
      name: _encoder_bottom_cutout
      extrude: 2
      shift: [0, 0, 1]
      operation: subtract
    - what: outline
      name: _all_bumpers
      extrude: 1
      operation: subtract
    - what: outline
      name: _diodes_cutout
      extrude: 1.4
      shift: [0, 0, 1.6]
      operation: subtract
    - what: outline
      name: _return_diodes_cutout
      extrude: 1.2
      shift: [0, 0, 1.8]
      operation: subtract
    - what: outline
      name: _xiao_bottom_cutout
      extrude: 2.5
      shift: [0, 0, 0.5]
      operation: subtract
    - what: outline
      name: _xiao_cutout_wall
      extrude: 1.2
      shift: [0, 0, 1.8]
      operation: subtract
    - what: outline
      name: _battery_wire_cutout
      extrude: 2.1
      shift: [0, 0, 0.9]
      operation: subtract
    - what: outline
      name: _reset_cutout
      extrude: 1.8
      shift: [0, 0, 1.2]
      operation: subtract
    - what: outline
      name: _power_cutout
      extrude: 1.6
      shift: [0, 0, 1.4]
      operation: subtract
    - what: outline
      name: _socket_post_holes
      extrude: 1.8
      shift: [0, 0, 1.2]
      operation: subtract
    - -_countersunk_screw

  _top_cutouts:
    - what: outline
      name: _xiao_light_guide
      extrude: 2.5
    - what: outline
      name: _switches_plate_cutout
      extrude: 2.5
    - what: outline
      name: _encoder_plate_cutout_expanded
      extrude: 1.2
    - what: outline
      name: _switches_clip_cutout
      extrude: 1.3
    - what: outline
      name: _hex_nuts
      extrude: 1.8
    - what: outline
      name: _battery_cutout
      extrude: 1.6
    - what: outline
      name: _xiao_usb
      extrude: 1.7
    - what: outline
      name: _xiao_chip
      extrude: 0.2
    - what: outline
      name: _pad_cutout
      extrude: 1

  top_case:
    - what: outline
      name: board_outline
      extrude: 2.5
    - -_top_cutouts

  _top_dovetail:
    - what: outline
      name: _dovetail
      extrude: 0.5
      shift: [0, 0, 2]
    - what: outline
      name: _dovetail_1
      extrude: 0.5
      shift: [0, 0, 1.5]
    - what: outline
      name: _dovetail_2
      extrude: 0.5
      shift: [0, 0, 1]
    - what: outline
      name: _dovetail_3
      extrude: 0.5
      shift: [0, 0, 0.5]
    - what: outline
      name: _dovetail_4
      extrude: 0.5

  top_dovetail:
    - _top_dovetail
    - -_top_cutouts

  _top_dovetail_sides:
    - top_case
    - -_top_dovetail

  top_dovetail_left:
    - _top_dovetail_sides
    - what: outline
      name: _right_half
      extrude: 3
      operation: subtract

  top_dovetail_right:
    - top_case
    - what: outline
      name: _left_half
      extrude: 3
      operation: subtract
    - -_top_dovetail

  # Remove the underscore to print out the mock PCB if you want to check for fit
  _mock_pcb:
    - what: outline
      name: pcb_outline
      extrude: 1.6
    - what: outline
      name: _socket_pcb_holes
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _screw_shaft
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _power_pcb_holes
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _reset_pcb_holes
      extrude: 1.6
      operation: subtract
    - what: outline
      name: _encoder_pcb_holes
      extrude: 1.6
      operation: subtract

pcbs:
  chuck:
    template: kicad8
    outlines:
      main:
        outline: pcb_outline
    params:
      name: *keyboard_name
      paper: A4

    footprints:
      hotswap_sockets:
        what: ks33
        where: switch
        params:
          from: "{{cpsrc}}"
          to: "{{colrow}}"
          include_keycap: true
          include_corner_marks: true
          include_socket_silks: true
        adjust.rotate: 180

      diodes:
        what: sod123
        where: [[switch, /^matrix|^thumbs/]]
        adjust:
          shift: [5, -1]
          rotate: 90
        params:
          side: B
          designator: SW
          from: "{{colrow}}"
          to: "D_{{cpdst}}"
          smd: true
          via: pad
          labels: true
          label_rotation: 90

      mirror_diodes:
        what: sod123
        where: [[switch, /^mirror/]]
        adjust:
          shift: [5, -1]
          rotate: 270
        params:
          side: B
          designator: SW
          from: "{{colrow}}"
          to: "D_{{cpdst}}"
          smd: true
          via: pad
          labels: true
          label_rotation: 90

      return_diodes:
        what: sod123
        where: return
        adjust.shift: [0, -0.6 dy]
        params:
          side: B
          designator: D
          from: "D_{{cpdst}}"
          to: "{{cpdst}}"
          smd: true
          via: pad
          labels: true

      interrupt_diodes:
        what: sod123
        where: return
        adjust.shift: [0, -0.75 dy]
        params:
          side: B
          designator: I
          from: "D_{{cpdst}}"
          to: CP_INT
          smd: true
          via: pad
          labels: true

      encoder:
        what: encoder
        where: encoder
        params:
          include_momentary_switch_pads: true
          include_plate_hole_marking: true
          S1: ENC_S
          S2: GND

      xiao_mcu:
        what: xiao
        where: mcu
        params:
          side: B
          orientation: down
          VUSB: none
          VCC: none
          P0: ENC_S
          P1: CP0
          P2: CP1
          P3: CP2
          P4: CP3
          P5: none
          P6: CP4
          P7: CP_INT
          P8: ENC_B
          P9: ENC_A
          P10: CP5

      xiao_note:
        what: text
        where: mcu
        adjust.shift: [0, -12]
        params:
          side: B
          text: XIAO BLE FACE DOWN

      xiao_bat_pos:
        what: pad
        where: xiao_pos_pad
        params:
          side: B
          net: BAT+
          text: BAT+
          shape: circle
          align: right
          width: 2
          height: 2

      xiao_reset:
        what: pad
        where: reset_pad
        params:
          side: B
          net: RST
          text: RST
          shape: circle
          align: right
          width: 2
          height: 2

      battery_wire_guide:
        what: arc
        where: battery
        adjust.shift: [11, 11]
        params.side: B

      battery_note:
        what: text
        where: battery
        adjust.shift: [0, 18]
        params:
          text: BATTERY 5 x 20 x 30 mm
          side: B

      battery_raw_pos:
        what: pad
        where: bat_pos_pad
        params:
          side: B
          net: RAW
          text: +
          shape: circle
          width: 2
          height: 2

      battery_raw_neg:
        what: pad
        where: bat_neg_pad
        params:
          side: B
          net: GND
          text: "-"
          width: 2
          height: 2

      reset_button:
        what: evqpuc
        where: reset
        params:
          side: B
          from: GND
          to: RST

      reset_note:
        what: text
        where: reset
        adjust:
          shift: [-4, 0.6]
        params:
          side: B
          text: RESET
          justify: left

      power_slider:
        what: trislider
        where: power
        params:
          side: B
          posts: true
          vias: true
          COM: RAW
          A: BAT+

      power_label:
        what: text
        where: power
        adjust.shift: [-4.5, 0.6]
        params:
          side: B
          text: POWER
          justify: right

      power_on:
        what: text
        where: power
        adjust.shift: [-4.5, -0.8]
        params:
          side: B
          text: ON
          justify: right

      power_off:
        what: text
        where: power
        adjust.shift: [4.5, 0.6]
        params:
          side: B
          text: OFF
          justify: left

      mounting_holes:
        what: mountinghole
        where: screw

      keyboard_name:
        what: text
        where: matrix_pinky_bottom
        adjust.shift: [dx - 4.5, -0.85 hdy]
        params:
          side: F
          text: *keyboard_name
          layer: Cu
          size: 3
          thickness: 0.5
          justify: left

      board_version:
        what: text
        where.aggregate.parts: [thumbs_thumb_spot, mirror_thumbs_thumb_spot]
        adjust.shift: [0, -0.7 dy]
        params:
          text: *version
          side: F

      board_repo:
        what: text
        where.aggregate.parts: [thumbs_thumb_spot, mirror_thumbs_thumb_spot]
        adjust.shift: [0, -0.85 dy]
        params:
          side: F
          text: *repo

      license_note:
        what: text
        where: mirror_matrix_pinky_bottom
        adjust.shift: [0.75 dx, -hdy]
        params:
          side: F
          text: *license
          justify: right

      order_number:
        what: text
        where: encoder
        adjust.shift: [0, hdy - 2.75]
        params:
          side: F
          text: *order_text