ci.yaml

# SPDX-License-Identifier: Apache-2.0
#
# Copyright 2023-2025 The Enola <https://enola.dev> Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions

name: CI

on:
  push:
    branches: [main]
  pull_request:
    # The branches below must be a subset of the branches above
    branches: [main]
    # https://github.com/orgs/community/discussions/25722
    types: [opened, synchronize, reopened, ready_for_review]

# Cancel any in-progress job or run if there is a newer commit
concurrency:
  group: ${{ github.ref }}
  cancel-in-progress: true

jobs:
  devcontainer:
    # https://github.com/orgs/community/discussions/25722
    if:
      (github.repository == 'enola-dev/enola') &&
      (github.event.pull_request.draft == false)
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      - name: DevContainer
        # TODO if: ${{ github.event_name == 'push' }}
        uses: devcontainers/ci@v0.3
        with:
          # TODO imageName: ghcr.io/example/example-devcontainer
          # TODO cacheFrom: ghcr.io/example/example-devcontainer
          # TODO push: always
          push: never
          runCmd: echo DevContainer OK!
          # TODO runCmd: ./tools/test-ci/test.bash

  build:
    # https://github.com/orgs/community/discussions/25722
    if:
      (github.repository == 'enola-dev/enola') &&
      (github.event.pull_request.draft == false)
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

      - name: Install bun
        uses: oven-sh/setup-bun@v2
        with:
          bun-version-file: .tool-versions
      - name: Install Web dependencies
        working-directory: web
        run: bun install
      # - name: Run Typescript Compiler (TSC)
      #  working-directory: web
      #  run: bun tsc
      - name: Build Web
        working-directory: web
        run: ./build

      - uses: actions/setup-java@v4
        with:
          distribution: "temurin"
          # NB: Repeated below in push-container-image: job; must keep in sync!
          java-version: "21"

      - name: Install graphviz
        # NB: We unfortunately cannot cache this, see https://github.com/enola-dev/enola/issues/823
        run: sudo apt-get install -y graphviz && dot -V
        shell: bash

      - name: Cache Bazel
        uses: bazel-contrib/setup-bazel@0.13.0
        with:
          # KEEP IN SYNC WITH BELOW!
          bazelisk-cache: true
          bazelisk-version: 1.25.0
          disk-cache: ${{ github.workflow }}
          # TODO manifest: npm: package-lock.json ??
          external-cache: true
          repository-cache: true

      - name: Cache Python
        uses: actions/cache@v4
        with:
          path: .venv/
          key: ${{ runner.os }}-venv-${{ hashFiles('requirements.txt') }}
          restore-keys: ${{ runner.os }}-venv-
      - name: Cache Node.js
        uses: actions/cache@v4
        with:
          path: ~/.npm
          # -${{ hashFiles('**/package-lock.json') }}
          key: ${{ runner.os }}-npm
          restore-keys: ${{ runner.os }}-npm
      - name: Cache Go
        uses: actions/cache@v4
        with:
          path: |
            ~/.cache/go-build
            ~/go
          key: ${{ runner.os }}-go-${{ hashFiles('**/go.sum') }}
          restore-keys: |
            ${{ runner.os }}-go-
      - name: Cache Pre-Commit
        uses: actions/cache@v4
        with:
          path: ~/.cache/pre-commit/
          key:
            ${{ runner.os }}-cache-${{ hashFiles('.pre-commit-config.yaml') }}
          restore-keys: ${{ runner.os }}-cache-
      - name: Cache Demo
        uses: actions/cache@v4
        with:
          path: .cache/demo/
          key: ${{ runner.os }}-demo-${{ hashFiles('tools/demo/*.bash') }}
          restore-keys: ${{ runner.os }}-demo-

      # https://asdf-vm.com
      - name: Setup ASDF itself
        uses: asdf-vm/actions/setup@v3
      - name: Cache ASDF
        uses: actions/cache@v4
        id: asdf-cache
        with:
          # https://github.com/asdf-vm/asdf/blob/master/.gitignore
          path: |
            ~/.asdf/installs
            ~/.asdf/plugins
            ~/.asdf/shims
          key: ${{ runner.os }}-asdf-tools-${{ hashFiles('.tool-versions') }}
          restore-keys: ${{ runner.os }}-asdf-tools-
      - name: Install ASDF plugins
        uses: asdf-vm/actions/install@v3
        # See https://github.com/asdf-vm/actions/issues/445
        if: ${{ steps.asdf-cache.outputs.cache-hit != 'true' }}
        with:
          # Keep this asdf_branch version in sync with //tools/asdf/install.bash
          asdf_branch: v0.14.0
      - name: Reshim installed ASDF tools
        run: asdf reshim
        shell: bash

      - run: ./tools/test-ci/test.bash

      # Build docs/ into site/ (not just on main branch but also for pull requests, as test)
      - name:
          Build Docs Site (but skip [slow] screencast recording, because on PR)
        if: ${{ github.event_name == 'pull_request' }}
        run: ./tools/docs/build.bash --without-demo-screencasts
      - name: Build Docs Site, now with Screencasts (because on branch)
        if: ${{ github.event_name == 'push' }}
        run: ./tools/docs/build.bash

      # TODO Move *BEFORE* ./tools/test-ci/test.bash, so that "dirty" changes cause build to abort
      - name: pre-commit run --all-files
        run: .venv/bin/pre-commit run --all-files

      # The following steps deploy site/ (using GitHub Pages)
      # to https://enola-dev.github.io = https://docs.enola.dev

      - name: Setup Pages
        if: ${{ github.event_name == 'push' }}
        uses: actions/configure-pages@v5

      - name: Upload site/ directory as GitHub Pages artifact
        if: ${{ github.event_name == 'push' }}
        uses: actions/upload-pages-artifact@v3
        with:
          path: "site/"

  deploy-website:
    needs: build
    if: ${{ github.event_name == 'push' }}
    runs-on: ubuntu-latest
    # https://docs.github.com/en/actions/security-guides/automatic-token-authentication
    # Sets required permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
    permissions:
      pages: write
      id-token: write
    environment:
      name: github-pages
      url: ${{ steps.deployment.outputs.page_url }}
    steps:
      # https://github.com/actions/deploy-pages
      - name: Deploy to GitHub Pages
        id: deployment
        uses: actions/deploy-pages@v4

  # https://docs.github.com/en/packages/managing-github-packages-using-github-actions-workflows/publishing-and-installing-a-package-with-github-actions#publishing-a-package-using-an-action
  push-container-image:
    needs: build
    if: ${{ github.event_name == 'push' }}
    runs-on: ubuntu-latest
    # This is a separate job from 'build' only because it needs additional permissions which we don't want 'build' to have:
    permissions:
      contents: read
      packages: write
    env:
      REGISTRY: ghcr.io
      IMAGE_NAME: ${{ github.repository }}
    steps:
      - uses: actions/checkout@v4
      - uses: actions/setup-java@v4
        with:
          distribution: "temurin"
          # NB: Repeated above in build: job; must keep in sync!
          java-version: "21"
      - name: Cache Bazel
        uses: bazel-contrib/setup-bazel@0.13.0
        with:
          # KEEP IN SYNC WITH ABOVE!
          bazelisk-cache: true
          bazelisk-version: 1.25.0
          disk-cache: ${{ github.workflow }}
          # TODO manifest: npm: package-lock.json ??
          external-cache: true
          repository-cache: true
      - name: Build Container Image # again, because technically it was already built in the 'build' job, but oh well!
        run: ./tools/distro/build.bash
      # Uses the `docker/login-action` action to log in to the Container registry registry using the account and password that will publish the packages. Once published, the packages are scoped to the account defined here.
      - name: Log in to the Container registry
        uses: docker/login-action@v3
        with:
          registry: ${{ env.REGISTRY }}
          username: ${{ github.actor }}
          password: ${{ secrets.GITHUB_TOKEN }}
      # This step uses [docker/metadata-action](https://github.com/docker/metadata-action#about) to extract tags and labels that will be applied to the specified image. The `id` "meta" allows the output of this step to be referenced in a subsequent step. The `images` value provides the base name for the tags and labels.
      - name: Extract metadata (tags, labels) for Docker
        id: meta
        uses: docker/metadata-action@v5
        with:
          images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}
      # This step uses the `docker/build-push-action` action to build the image, based on your repository's `Dockerfile`. If the build succeeds, it pushes the image to GitHub Packages.
      # It uses the `context` parameter to define the build's context as the set of files located in the specified path. For more information, see "[Usage](https://github.com/docker/build-push-action#usage)" in the README of the `docker/build-push-action` repository.
      # It uses the `tags` and `labels` parameters to tag and label the image with the output from the "meta" step.
      - name: Build and push Docker image
        uses: docker/build-push-action@v6
        with:
          context: .
          push: true
          tags: ${{ steps.meta.outputs.tags }}
          labels: ${{ steps.meta.outputs.labels }}