No Satellite Data and High PPM - Related?

[dandspach]

I am perplexed by the lack of Satellite images and high PPM values, I've been through every support document I can find, watched multiple youtube videos and browsed the github and sicord channels, to no avail.
All software and functionality seems to be working as it should with the exception that I'm not seeing any actual Satellite data on my map overlays.

Can provide images as a follow-up.

Hardware:

• RTL-SDR RTL2832U
• RaspberryPI III
• Antenna: V-Dipole

Note: I have previously used this set-up for years and had great results, but wanted to upgrade the software to
raspberry-noaa-v2 for its many features.

Problem:

1. Schedule and and tasks work as they should, however, I am not seeing any Satellite images, only the map overlays.
2. High PPM values?

Steps Taken:
-Fresh sd image of raspberry-noaa-v2 installed, all applicable settings for timezone, lat/lon, hardware setup made (all working perfect)
-Config File Changes:
-Changed the minimum elevation values of each desired satellite to 30'
-Increased gain values of each desired satellite to 40.2
-Limited scheduling and capture to NOAA 15, 18, 19
-Ran both ./scripts/schedule_and_update.sh and ./scripts/schedule.sh -x then rebooted
-Checked antenna functionality by running test scripts for FM broadcast stations (can clearly hear stations)

-Results of >rtl_test clearly show SDR device present...
-Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001

-Results of 'rlt_test -p'...Is it normal to show such high PPM values?
pi@RaspiNOAA:~/raspberry-noaa-v2 $ rtl_test -p
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 ....
[R82XX] PLL not locked!
Sampling at 2048000 S/s.
Reporting PPM error measurement every 10 seconds...
Press ^C after a few minutes.
Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 32 bytes
real sample rate: 2046299 current PPM: -830 cumulative PPM: -830
real sample rate: 2049989 current PPM: 971 cumulative PPM: 115
real sample rate: 2046546 current PPM: -710 cumulative PPM: -168
real sample rate: 2047126 current PPM: -426 cumulative PPM: -234
real sample rate: 2049487 current PPM: 726 cumulative PPM: -39
real sample rate: 2048612 current PPM: 299 cumulative PPM: 19
real sample rate: 2046407 current PPM: -778 cumulative PPM: -97
real sample rate: 2048194 current PPM: 95 cumulative PPM: -72
real sample rate: 2048057 current PPM: 28 cumulative PPM: -61
real sample rate: 2049463 current PPM: 714 cumulative PPM: 17
real sample rate: 2046418 current PPM: -772 cumulative PPM: -55
real sample rate: 2046697 current PPM: -636 cumulative PPM: -104
real sample rate: 2047777 current PPM: -109 cumulative PPM: -104
real sample rate: 2050678 current PPM: 1308 cumulative PPM: -3
real sample rate: 2045632 current PPM: -1156 cumulative PPM: -81
real sample rate: 2049052 current PPM: 514 cumulative PPM: -43
real sample rate: 2048521 current PPM: 255 cumulative PPM: -26
real sample rate: 2049148 current PPM: 561 cumulative PPM: 7
real sample rate: 2046219 current PPM: -869 cumulative PPM: -39
real sample rate: 2047276 current PPM: -353 cumulative PPM: -55
real sample rate: 2049154 current PPM: 564 cumulative PPM: -25
real sample rate: 2049350 current PPM: 659 cumulative PPM: 6
real sample rate: 2046428 current PPM: -767 cumulative PPM: -28
real sample rate: 2047424 current PPM: -281 cumulative PPM: -38
real sample rate: 2048098 current PPM: 48 cumulative PPM: -35
real sample rate: 2049941 current PPM: 948 cumulative PPM: 3

-I do know from previous experience with running scans that I have some nearby cell tower RF noise, however I have always recieved
data from NOAA satellites.

[dandspach]

Figured this out. Set gain to '0'. Pics coming in now.