Chinese.xml

<settings>
    <MainForm id="0">主界面</MainForm>
    <ECG id="1">心电图</ECG>
    <VisualChart id="2">视力表</VisualChart>
    <ColorBlindness id="3">色觉图</ColorBlindness>
    <Setting id="4">设置</Setting>
    <ReStart id="5">重启</ReStart>
    <PatientType id="6">病人类型:</PatientType>
    <NIBPTest id="7">血压测量</NIBPTest>
    <BSTest id="8">血糖测量</BSTest>
    <Print id="9">打印</Print>
    <Reset id="10">重置</Reset>
    <BS id="11">血糖</BS>
    <BT id="12">体温</BT>
    <SBP id="13">收缩压</SBP>
    <MAP id="14">平均压</MAP>
    <DBP id="15">舒张压</DBP>
    <SPO2 id="16">血氧饱和度</SPO2>
    <PR id="17">脉率</PR>
    <Max id="18">上限</Max>
    <Min id="19">下限</Min>
    <Lead id="20">导联</Lead>
    <Gain id="21">增益</Gain>
    <ECCGSet id="22">心电设置</ECCGSst>
    <ECGChannel1 id="23">心电通道1</ECGChannel1>
    <ECGChannel2 id="24">心电通道2</ECGChannel2>
    <LeadSet id="25">导联设置</LeadSet>
    <GainSet id="26">增益设置</GainSet>
    <LeadChange id="27">导联切换</LeadChange>
    <GainChange id="28">增益切换</GainChange>
    <Other id="29">其他</Other>
    <ModelSet id="30">模式设置</ModelSet>
    <MonitorModel id="31">监护模式</MonitorModel>
    <ECGModel id="32">心电图模式</ECGModel>
    <Calibrate id="33">定标</Calibrate>
    <Freezing id="34">冻结</Freezing>
    <HR id="35">心率</HR>
    <Magnify id="36">放大</Magnify>
    <Narrow id="37">缩小</Narrow>
    <Random id="38">随机</Random>
    <Right id="39">正确</Right>
    <Fault id="40">错误</Fault>
    <Result id="41">结果</Result>
    <Clear id="42">清除</Clear>
    <Previous id="43">上一页</Previous>
    <Next id="44">下一页</Next>
    <PRAlarm id="45">脉率报警</PRAlarm>
    <Spo2Alarm id="46">血氧报警</Spo2Alarm>
    <BSAlarm id="47">血糖报警</BSAlarm>
    <BTAlarm id="48">体温报警</BTAlarm>
    <SBPAlarm id="49">收缩压报警</SBPAlarm>
    <DBPAlarm id="50">舒张压报警</DBPAlarm>
    <MAPAlarm id="51">平均压报警</MAPAlarm>
    <TimeSet id="52">时间设置</TimeSet>
    <Set id="53">设置</Set>
    <LangueSet id="54">语言设置</LangueSet>
    <BuzzingSet id="55">蜂鸣设置</BuzzingSet>
    <LocalIP id="56">本机IP</LocalIP>
    <GateWay id="57">网关</GateWay>
    <SubnetMask id="58">掩码</SubnetMask>
    <Port id="59">端口</Port>
    <OK id="60">确认</OK>
    <DEL id="61">删除</DEL>
    <SystemSet id="62">系统配置</SystemSet>
</settings>