Thread_SLIP_Atmel_RF.json

{
    "config": {
        "heap-size": {
             "help": "The amount of static RAM to reserve for nsdynmemlib heap",
             "value": 50000
        },
        "radio-type":{
            "help": "options are ATMEL, MCR20",
            "value": "ATMEL"
        },
        "backhaul-driver": {
            "help": "options are ETH, SLIP",
            "value": "SLIP"
        },
        "mesh-mode": {
            "help": "Mesh networking mode. Options are LOWPAN_ND and THREAD",
            "value": "THREAD"
        },
        "backhaul-mac-src": {
            "help": "Where to get EUI48 address. Options are BOARD, CONFIG",
            "value": "BOARD"
        },
        "backhaul-mld": {
            "help": "Enable proxying Multicast Listener Discovery messages to backhaul network",
            "value": "false"
        },
        "backhaul-mac": "{0x02, 0x00, 0x00, 0x00, 0x00, 0x01}",
        "slip_hw_flow_control": "true",
        "slip_serial_baud_rate": "921600",
        "rf-channel": 22,
        "rf-channel-page": 0,
        "rf-channel-mask": "0x07fff800",
        "debug-trace":  1,
        "backhaul-dynamic-bootstrap": true,
        "backhaul-prefix": "\"fd00:300::\"",
        "backhaul-next-hop": "\"fe80::1\"",
        "backhaul-default-route": "\"::/0\"",
        "commissioning-dataset-timestamp": "0x00010000",
        "pan-id": "0x0700",
        "extended-pan-id": "{0xf1, 0xb5, 0xa1, 0xb2,0xc4, 0xd5, 0xa1, 0xbd }",
        "mesh-local-prefix": "{0xfd, 0x0, 0x0d, 0xb8, 0x0, 0x0, 0x0, 0x0}",
        "network-name": "\"Thread Network\"",
        "pskd": "\"abcdefghijklmno\"",
        "pskc": "{0xc8, 0xa6, 0x2e, 0xae, 0xf3, 0x68, 0xf3, 0x46, 0xa9, 0x9e, 0x57, 0x85, 0x98, 0x9d, 0x1c, 0xd0}",
        "thread-master-key": "{0x10, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff}",
        "thread-use-static-link-config": true,
        "LED": "NC",
        "SERIAL_TX": "NC",
        "SERIAL_RX": "NC",
        "SERIAL_CTS": "NC",
        "SERIAL_RTS": "NC"
    },
    "macros": ["MBEDTLS_USER_CONFIG_FILE=\"source/mbedtls_thread_config.h\"", "ATMEL_SPI_RST = PTD4"],
    "target_overrides": {
        "*": {
            "target.features_add": ["NANOSTACK", "COMMON_PAL", "THREAD_BORDER_ROUTER"],
            "target.features_remove": ["LWIP"],
            "mbed-trace.enable": 1,
            "nanostack.configuration": "thread_border_router",
            "platform.stdio-convert-newlines": true,
            "platform.stdio-baud-rate": 115200
        },
        "K64F": {
            "LED": "LED_GREEN",
            "SERIAL_TX": "PTE0",
            "SERIAL_RX": "PTE1",
            "SERIAL_CTS": "PTE2",
            "SERIAL_RTS": "PTE3"
        },
        "K66F": {
            "LED": "LED_GREEN"
        }
    }
}