USB-WiFi Frequently Asked Questions (FAQ)
Note: If you find that any of the issues listed below have been fixed, please let me know by posting a message in issues. Keeping the information on this site current is a challenge and can only work with your help. Thanks.
No. 1
Question: I am having problems with my Alfa AXML or Alfa AXM or Comfast CF-953AX. The wifi is not working. It seems to crash when coming up. What can I do?
Answer: This is a known problem that started in early 2024 around the time kernel 6.7 was released. There have been unsuccessful attempts to fix this problem. It is a strange problem in that it seems that bluetooth is involved. Most adapters with the mt7921au chipset do not have this problem. The 3 adapters listed in the question are the only 3 known to have this problem so it appears that something specific to these 3 adapters is causing the problem. Right now all that can be offered is a workaround.
This workaround was posted by @ZerBea :
Use one of the following Linux kernels:
$ uname -r
6.6.x
or
$ uname -r
6.12.x
Make sure you're running latest WiFi firmware:
[18615.766176] mt7921u 1-9.3:1.3: WM Firmware Version: ____010000, Build Time: 20241106151045
Disable BT stack:
echo "install btusb /bin/false" >> /etc/modprobe.d/local-dontload.conf
reboot or unload btusb
connect the AXML to a USB2 port or a USB2 hub
Now dmesg should print this:
[20844.686881] usb 1-9.3: new high-speed USB device number 12 using xhci_hcd
[20844.818337] usb 1-9.3: New USB device found, idVendor=0e8d, idProduct=7961, bcdDevice= 1.00
[20844.818343] usb 1-9.3: New USB device strings: Mfr=6, Product=7, SerialNumber=8
[20844.818346] usb 1-9.3: Product: Wireless_Device
[20844.818347] usb 1-9.3: Manufacturer: MediaTek Inc.
[20844.818349] usb 1-9.3: SerialNumber: 000000000
[20845.018645] usb 1-9.3: reset high-speed USB device number 12 using xhci_hcd
[20845.159101] mt7921u 1-9.3:1.3: HW/SW Version: 0x8a108a10, Build Time: 20241106151007a
[20845.420854] mt7921u 1-9.3:1.3: WM Firmware Version: ____010000, Build Time: 20241106151045
[20847.020857] mt7921u 1-9.3:1.3 wlp22s0f0u9u3i3: renamed from wlan0
test monitor mode and packet injection:
$ sudo hcxdumptool --rcascan=active --tot=1 -c 1a
...
^C
132 Packet(s) captured by kernel
0 Packet(s) dropped by kernel
57 PROBERESPONSE(s) captured
Monitor mode (device entered promiscuous mode) and packet injection (57 PROBERESPONSE(s) captured) is working!
exit on sigterm
$ sudo dmesg
[21146.046337] mt7921u 1-9.3:1.3 wlp22s0f0u9u3i3: entered promiscuous mode
[21153.630136] mt7921u 1-9.3:1.3 wlp22s0f0u9u3i3: left promiscuous mode
No. 2
Question: My 6GHz band shows as disabled when I run iw list. I want to be
able to use the 6 GHz band. How can I fix this?
Answer: This may happen with MEDIATEK cards and adapters on Linux 6.7.x or newer. There has been a lot of work on the WiFi support in Linux over the last year. We have seen an uptick in WiFi problems as a result. As of kernel 6.12, things seem to be getting better but there is work to be done.
A new feature called "CLC (Country Location Control)" must be disabled in the
mt7921_common module in order to use the 6 GHz band (for now). Make a file
called /etc/modprobe.d/mt7921.conf containing options mt7921_common disable_clc=1.
Example:
Open a Terminal
Create the file: $ sudo nano /etc/modprobe.d/mt7921.conf
Note: You can use your own favorite text editor in place of nano if you wish.
Add the following line to the file: options mt7921_common disable_clc=1
Save the file and reboot.
Information: https://bugzilla.kernel.org/show_bug.cgi?id=218731
No. 3
Question: It appears that the Wireless Regulation information is not correct. How can I fix this?
Answer: When you run $ iw reg get you should be able to see the country setting of your system and the bands that you can use. Examples of what you may see if there is a problem: 5GHz channels do not allow access point operation (iw list showing no-ir on all channels) and 6GHz channels would be completely disabled.
If you see the wrong country or some bands that you would expect to work are not available, the following may help:
Open a Terminal interface
Create the file: $ sudo nano /etc/modprobe.d/cfg80211.conf
Note: You can use your own favorite text editor in place of nano if you wish.
Add the following line to the file: options cfg80211 ieee80211_regdom=AU
Note: If your country code is not AU, you will need to replace AU with your country code
Save the file and reboot.
No. 4
Question: Why do I see high levels of jitter with my mt7922 based wifi card? It uses the mt7921e driver.
Answer: You can try disabling power management for that card as follows:
Open a Terminal interface
Create the file: $ sudo nano /etc/modprobe.d/mt7921.conf
Note: You can use your own favorite text editor in place of nano if you wish.
Add the following line to the file: options mt7921e disable_aspm=Y
Save the file and reboot.