sms.cpp

#include "sms.h"

/**********************************************************
Method sends SMS

number_str:   pointer to the phone number string
message_str:  pointer to the SMS text string


return: 
        ERROR ret. val:
        ---------------
        -1 - comm. line to the GSM module is not free
        -2 - GSM module didn't answer in timeout
        -3 - GSM module has answered "ERROR" string

        OK ret val:
        -----------
        0 - SMS was not sent
        1 - SMS was sent


an example of usage:
        GSM gsm;
        gsm.SendSMS("00XXXYYYYYYYYY", "SMS text");
**********************************************************/
char SMSGSM::SendSMS(char *number_str, char *message_str) 
{
  char ret_val = -1;
  byte i;
  char end[2];
  end[0]=0x1a;
  end[1]='\0';
/*
  if (CLS_FREE != gsm.GetCommLineStatus()) return (ret_val);
  gsm.SetCommLineStatus(CLS_ATCMD);  
  ret_val = 0; // still not send
*/
  // try to send SMS 3 times in case there is some problem
  for (i = 0; i < 1; i++) {
    // send  AT+CMGS="number_str"
    
    gsm.SimpleWrite("AT+CMGS=\"");
    gsm.SimpleWrite(number_str);  
    gsm.SimpleWriteln("\"");
    
	#ifdef DEBUG_ON
		Serial.println("DEBUG:SMS TEST");
	#endif
    // 1000 msec. for initial comm tmout
    // 50 msec. for inter character timeout
    if (RX_FINISHED_STR_RECV == gsm.WaitResp(1000, 500, ">")) {
		#ifdef DEBUG_ON
			Serial.println("DEBUG:>");
		#endif
      // send SMS text
      gsm.SimpleWrite(message_str); 
      gsm.SimpleWriteln(end);
	  //_cell.flush(); // erase rx circular buffer
      if (RX_FINISHED_STR_RECV == gsm.WaitResp(7000, 5000, "+CMGS")) {
        // SMS was send correctly 
        ret_val = 1;

        break;
      }
      else continue;
    }
    else {
      // try again
      continue;

    }
  }

  gsm.SetCommLineStatus(CLS_FREE);
  return (ret_val);
}

/**********************************************************
Method sends SMS to the specified SIM phonebook position

sim_phonebook_position:   SIM phonebook position <1..20>
message_str:              pointer to the SMS text string


return: 
        ERROR ret. val:
        ---------------
        -1 - comm. line to the GSM module is not free
        -2 - GSM module didn't answer in timeout
        -3 - specified position must be > 0

        OK ret val:
        -----------
        0 - SMS was not sent
        1 - SMS was sent


an example of usage:
        GSM gsm;
        gsm.SendSMS(1, "SMS text");
**********************************************************/
char SMSGSM::SendSMS(byte sim_phonebook_position, char *message_str) 
{
  char ret_val = -1;
  char sim_phone_number[20];

  ret_val = 0; // SMS is not send yet
  if (sim_phonebook_position == 0) return (-3);
  if (1 == gsm.GetPhoneNumber(sim_phonebook_position, sim_phone_number)) {
    // there is a valid number at the spec. SIM position
    // => send SMS
    // -------------------------------------------------
    ret_val = SendSMS(sim_phone_number, message_str);
  }
  return (ret_val);

}


/**********************************************************
Method finds out if there is present at least one SMS with
specified status

Note:
if there is new SMS before IsSMSPresent() is executed
this SMS has a status UNREAD and then
after calling IsSMSPresent() method status of SMS
is automatically changed to READ

required_status:  SMS_UNREAD  - new SMS - not read yet
                  SMS_READ    - already read SMS                  
                  SMS_ALL     - all stored SMS

return: 
        ERROR ret. val:
        ---------------
        -1 - comm. line to the GSM module is not free
        -2 - GSM module didn't answer in timeout

        OK ret val:
        -----------
        0 - there is no SMS with specified status
        1..20 - position where SMS is stored 
                (suitable for the function GetGSM())


an example of use:
        GSM gsm;
        char position;  
        char phone_number[20]; // array for the phone number string
        char sms_text[100];

        position = gsm.IsSMSPresent(SMS_UNREAD);
        if (position) {
          // read new SMS
          gsm.GetGSM(position, phone_num, sms_text, 100);
          // now we have phone number string in phone_num
          // and SMS text in sms_text
        }
**********************************************************/
char SMSGSM::IsSMSPresent(byte required_status) 
{
  char ret_val = -1;
  char *p_char;
  byte status;

  if (CLS_FREE != gsm.GetCommLineStatus()) return (ret_val);
  gsm.SetCommLineStatus(CLS_ATCMD);
  ret_val = 0; // still not present

  switch (required_status) {
    case SMS_UNREAD:
      gsm.SimpleWriteln("AT+CMGL=\"REC UNREAD\"");
      break;
    case SMS_READ:
      gsm.SimpleWriteln("AT+CMGL=\"REC READ\"");
      break;
    case SMS_ALL:
      gsm.SimpleWriteln("AT+CMGL=\"ALL\"");
      break;
  }

  // 5 sec. for initial comm tmout
  // and max. 1500 msec. for inter character timeout
  gsm.RxInit(5000, 1500); 
  // wait response is finished
  do {
    if (gsm.IsStringReceived("OK")) { 
      // perfect - we have some response, but what:

      // there is either NO SMS:
      // <CR><LF>OK<CR><LF>

      // or there is at least 1 SMS
      // +CMGL: <index>,<stat>,<oa/da>,,[,<tooa/toda>,<length>]
      // <CR><LF> <data> <CR><LF>OK<CR><LF>
      status = RX_FINISHED;
      break; // so finish receiving immediately and let's go to 
             // to check response 
    }
    status = gsm.IsRxFinished();
  } while (status == RX_NOT_FINISHED);

  


  switch (status) {
    case RX_TMOUT_ERR:
      // response was not received in specific time
      ret_val = -2;
      break;

    case RX_FINISHED:
      // something was received but what was received?
      // ---------------------------------------------
      if(gsm.IsStringReceived("+CMGL:")) { 
        // there is some SMS with status => get its position
        // response is:
        // +CMGL: <index>,<stat>,<oa/da>,,[,<tooa/toda>,<length>]
        // <CR><LF> <data> <CR><LF>OK<CR><LF>
        p_char = strchr((char *)gsm.comm_buf,':');
        if (p_char != NULL) {
          ret_val = atoi(p_char+1);
        }
      }
      else {
        // other response like OK or ERROR
        ret_val = 0;
      }

      // here we have gsm.WaitResp() just for generation tmout 20msec. in case OK was detected
      // not due to receiving
      gsm.WaitResp(20, 20); 
      break;
  }

  gsm.SetCommLineStatus(CLS_FREE);
  return (ret_val);
}


/**********************************************************
Method reads SMS from specified memory(SIM) position

position:     SMS position <1..20>
phone_number: a pointer where the phone number string of received SMS will be placed
              so the space for the phone number string must be reserved - see example
SMS_text  :   a pointer where SMS text will be placed
max_SMS_len:  maximum length of SMS text excluding also string terminating 0x00 character
              
return: 
        ERROR ret. val:
        ---------------
        -1 - comm. line to the GSM module is not free
        -2 - GSM module didn't answer in timeout
        -3 - specified position must be > 0

        OK ret val:
        -----------
        GETSMS_NO_SMS       - no SMS was not found at the specified position
        GETSMS_UNREAD_SMS   - new SMS was found at the specified position
        GETSMS_READ_SMS     - already read SMS was found at the specified position
        GETSMS_OTHER_SMS    - other type of SMS was found 


an example of usage:
        GSM gsm;
        char position;
        char phone_num[20]; // array for the phone number string
        char sms_text[100]; // array for the SMS text string

        position = gsm.IsSMSPresent(SMS_UNREAD);
        if (position) {
          // there is new SMS => read it
          gsm.GetGSM(position, phone_num, sms_text, 100);
          #ifdef DEBUG_PRINT
            gsm.DebugPrint("DEBUG SMS phone number: ", 0);
            gsm.DebugPrint(phone_num, 0);
            gsm.DebugPrint("\r\n          SMS text: ", 0);
            gsm.DebugPrint(sms_text, 1);
          #endif
        }        
**********************************************************/
char SMSGSM::GetSMS(byte position, char *phone_number, char *SMS_text, byte max_SMS_len) 
{
  char ret_val = -1;
  char *p_char; 
  char *p_char1;
  byte len;

  if (position == 0) return (-3);
  if (CLS_FREE != gsm.GetCommLineStatus()) return (ret_val);
  gsm.SetCommLineStatus(CLS_ATCMD);
  phone_number[0] = 0;  // end of string for now
  ret_val = GETSMS_NO_SMS; // still no SMS
  
  //send "AT+CMGR=X" - where X = position
  gsm.SimpleWrite("AT+CMGR=");
  gsm.SimpleWriteln((int)position);  

  // 5000 msec. for initial comm tmout
  // 100 msec. for inter character tmout
  switch (gsm.WaitResp(5000, 100, "+CMGR")) {
    case RX_TMOUT_ERR:
      // response was not received in specific time
      ret_val = -2;
      break;

    case RX_FINISHED_STR_NOT_RECV:
      // OK was received => there is NO SMS stored in this position
      if(gsm.IsStringReceived("OK")) {
        // there is only response <CR><LF>OK<CR><LF> 
        // => there is NO SMS
        ret_val = GETSMS_NO_SMS;
      }
      else if(gsm.IsStringReceived("ERROR")) {
        // error should not be here but for sure
        ret_val = GETSMS_NO_SMS;
      }
      break;

    case RX_FINISHED_STR_RECV:
      // find out what was received exactly

      //response for new SMS:
      //<CR><LF>+CMGR: "REC UNREAD","+XXXXXXXXXXXX",,"02/03/18,09:54:28+40"<CR><LF>
		  //There is SMS text<CR><LF>OK<CR><LF>
      if(gsm.IsStringReceived("\"REC UNREAD\"")) { 
        // get phone number of received SMS: parse phone number string 
        // +XXXXXXXXXXXX
        // -------------------------------------------------------
        ret_val = GETSMS_UNREAD_SMS;
      }
      //response for already read SMS = old SMS:
      //<CR><LF>+CMGR: "REC READ","+XXXXXXXXXXXX",,"02/03/18,09:54:28+40"<CR><LF>
		  //There is SMS text<CR><LF>
      else if(gsm.IsStringReceived("\"REC READ\"")) {
        // get phone number of received SMS
        // --------------------------------
        ret_val = GETSMS_READ_SMS;
      }
      else {
        // other type like stored for sending.. 
        ret_val = GETSMS_OTHER_SMS;
      }

      // extract phone number string
      // ---------------------------
      p_char = strchr((char *)(gsm.comm_buf),',');
      p_char1 = p_char+2; // we are on the first phone number character
      p_char = strchr((char *)(p_char1),'"');
      if (p_char != NULL) {
        *p_char = 0; // end of string
        strcpy(phone_number, (char *)(p_char1));
      }


      // get SMS text and copy this text to the SMS_text buffer
      // ------------------------------------------------------
      p_char = strchr(p_char+1, 0x0a);  // find <LF>
      if (p_char != NULL) {
        // next character after <LF> is the first SMS character
        p_char++; // now we are on the first SMS character 

        // find <CR> as the end of SMS string
        p_char1 = strchr((char *)(p_char), 0x0d);  
        if (p_char1 != NULL) {
          // finish the SMS text string 
          // because string must be finished for right behaviour 
          // of next strcpy() function
          *p_char1 = 0; 
        }
        // in case there is not finish sequence <CR><LF> because the SMS is
        // too long (more then 130 characters) sms text is finished by the 0x00
        // directly in the gsm.WaitResp() routine

        // find out length of the SMS (excluding 0x00 termination character)
        len = strlen(p_char);

        if (len < max_SMS_len) {
          // buffer SMS_text has enough place for copying all SMS text
          // so copy whole SMS text
          // from the beginning of the text(=p_char position) 
          // to the end of the string(= p_char1 position)
          strcpy(SMS_text, (char *)(p_char));
        }
        else {
          // buffer SMS_text doesn't have enough place for copying all SMS text
          // so cut SMS text to the (max_SMS_len-1)
          // (max_SMS_len-1) because we need 1 position for the 0x00 as finish 
          // string character
          memcpy(SMS_text, (char *)(p_char), (max_SMS_len-1));
          SMS_text[max_SMS_len] = 0; // finish string
        }
      }
      break;
  }

  gsm.SetCommLineStatus(CLS_FREE);
  return (ret_val);
}

/**********************************************************
Method reads SMS from specified memory(SIM) position and
makes authorization - it means SMS phone number is compared
with specified SIM phonebook position(s) and in case numbers
match GETSMS_AUTH_SMS is returned, otherwise GETSMS_NOT_AUTH_SMS
is returned

position:     SMS position to be read <1..20>
phone_number: a pointer where the tel. number string of received SMS will be placed
              so the space for the phone number string must be reserved - see example
SMS_text  :   a pointer where SMS text will be placed
max_SMS_len:  maximum length of SMS text excluding terminating 0x00 character

first_authorized_pos: initial SIM phonebook position where the authorization process
                      starts
last_authorized_pos:  last SIM phonebook position where the authorization process
                      finishes

                      Note(important):
                      ================
                      In case first_authorized_pos=0 and also last_authorized_pos=0
                      the received SMS phone number is NOT authorized at all, so every
                      SMS is considered as authorized (GETSMS_AUTH_SMS is returned)
              
return: 
        ERROR ret. val:
        ---------------
        -1 - comm. line to the GSM module is not free
        -2 - GSM module didn't answer in timeout
        -3 - position must be > 0

        OK ret val:
        -----------
        GETSMS_NO_SMS           - no SMS was found at the specified position
        GETSMS_NOT_AUTH_SMS     - NOT authorized SMS found at the specified position
        GETSMS_AUTH_SMS         - authorized SMS found at the specified position


an example of usage:
        GSM gsm;
        char phone_num[20]; // array for the phone number string
        char sms_text[100]; // array for the SMS text string

        // authorize SMS with SIM phonebook positions 1..3
        if (GETSMS_AUTH_SMS == gsm.GetAuthorizedSMS(1, phone_num, sms_text, 100, 1, 3)) {
          // new authorized SMS was detected at the SMS position 1
          #ifdef DEBUG_PRINT
            gsm.DebugPrint("DEBUG SMS phone number: ", 0);
            gsm.DebugPrint(phone_num, 0);
            gsm.DebugPrint("\r\n          SMS text: ", 0);
            gsm.DebugPrint(sms_text, 1);
          #endif
        }

        // don't authorize SMS with SIM phonebook at all
        if (GETSMS_AUTH_SMS == gsm.GetAuthorizedSMS(1, phone_num, sms_text, 100, 0, 0)) {
          // new SMS was detected at the SMS position 1
          // because authorization was not required
          // SMS is considered authorized
          #ifdef DEBUG_PRINT
            gsm.DebugPrint("DEBUG SMS phone number: ", 0);
            gsm.DebugPrint(phone_num, 0);
            gsm.DebugPrint("\r\n          SMS text: ", 0);
            gsm.DebugPrint(sms_text, 1);
          #endif
        }
**********************************************************/
char SMSGSM::GetAuthorizedSMS(byte position, char *phone_number, char *SMS_text, byte max_SMS_len,
                           byte first_authorized_pos, byte last_authorized_pos)
{
  char ret_val = -1;
  byte i;

  ret_val = GetSMS(position, phone_number, SMS_text, max_SMS_len);
  if (ret_val < 0) {
    // here is ERROR return code => finish
    // -----------------------------------
  }
  else if (ret_val == GETSMS_NO_SMS) {
    // no SMS detected => finish
    // -------------------------
  }
  else if (ret_val == GETSMS_READ_SMS) {
    // now SMS can has only READ attribute because we have already read
    // this SMS at least once by the previous function GetSMS()
    //
    // new READ SMS was detected on the specified SMS position =>
    // make authorization now
    // ---------------------------------------------------------
    if ((first_authorized_pos == 0) && (last_authorized_pos == 0)) {
      // authorization is not required => it means authorization is OK
      // -------------------------------------------------------------
      ret_val = GETSMS_AUTH_SMS;
    }
    else {
      ret_val = GETSMS_NOT_AUTH_SMS;  // authorization not valid yet
      for (i = first_authorized_pos; i <= last_authorized_pos; i++) {
        if (gsm.ComparePhoneNumber(i, phone_number)) {
          // phone numbers are identical
          // authorization is OK
          // ---------------------------
          ret_val = GETSMS_AUTH_SMS;
          break;  // and finish authorization
        }
      }
    }
  }
  return (ret_val);
}


/**********************************************************
Method deletes SMS from the specified SMS position

position:     SMS position <1..20>

return: 
        ERROR ret. val:
        ---------------
        -1 - comm. line to the GSM module is not free
        -2 - GSM module didn't answer in timeout
        -3 - position must be > 0

        OK ret val:
        -----------
        0 - SMS was not deleted
        1 - SMS was deleted
**********************************************************/
char SMSGSM::DeleteSMS(byte position) 
{
  char ret_val = -1;

  if (position == 0) return (-3);
  if (CLS_FREE != gsm.GetCommLineStatus()) return (ret_val);
  gsm.SetCommLineStatus(CLS_ATCMD);
  ret_val = 0; // not deleted yet
  
  //send "AT+CMGD=XY" - where XY = position
  gsm.SimpleWrite("AT+CMGD=");
  gsm.SimpleWriteln((int)position);  


  // 5000 msec. for initial comm tmout
  // 20 msec. for inter character timeout
  switch (gsm.WaitResp(5000, 50, "OK")) {
    case RX_TMOUT_ERR:
      // response was not received in specific time
      ret_val = -2;
      break;

    case RX_FINISHED_STR_RECV:
      // OK was received => SMS deleted
      ret_val = 1;
      break;

    case RX_FINISHED_STR_NOT_RECV:
      // other response: e.g. ERROR => SMS was not deleted
      ret_val = 0; 
      break;
  }

  gsm.SetCommLineStatus(CLS_FREE);
  return (ret_val);
}