Skip to content

Latest commit

 

History

History
51 lines (30 loc) · 2.5 KB

_index.md

File metadata and controls

51 lines (30 loc) · 2.5 KB
title description weight
Elsys ERS Lite

{{< figure src="elsys-ers-lite.png" alt="ELSYS ERS Lite" class="float plain" width="80%">}}

The Elsys ERS Lite is an indoor environment sensor for measuring temperature and humidity.

Provisioning Information

The provisioning information, DevEUI, can be found on the back of the device. You can use all zeros as the JoinEUI. The AppKey is provided through an email when you purchase the device.

{{< figure src="elsys-ers-lite-back.png" alt="Elsys ERS Lite provisioning information" >}}

{{< note "Elsys ERS Lite cannot be onboarded to {{% tts %}} using QR code." />}}

Onboarding to {{% tts %}}

You can onboard your Elsys ERS Lite using the LoRaWAN Device Repository or manually option.

If you prefer onboarding with the LoRaWAN Device Repository, in the End device type section, under Input method, select the Select the end device in the LoRaWAN Device Repository option.

The [Onboarding devices without QR codes]({{< ref "/devices/adding-devices/#onboarding-devices-without-qr-codes" >}}) section of the [Adding Devices]({{< ref "/devices/adding-devices/" >}}) guide explains this procedure in detail. Following details are Elsys ERS Lite-specific:

  • End device brand: Elsys
  • Model: ERS Lite indoor environment monitoring
  • Hardware Ver.: 1.0
  • Firmware Ver.: 1.0

After configuring your device, select the Register end device button.

{{< figure src="elsys-ers-lite-device-repository.png" alt="Settings for registration through device repository" >}}

If you prefer onboarding manually, in the End device type section, under Input Method, select Enter end device specifics manually option. The [Manually adding devices]({{< ref "/devices/adding-devices/manual/" >}}) and [Over the Air Activation (OTAA)]({{< ref "/devices/adding-devices/manual/otaa/" >}}) guides explain this procedure in detail. Following details are Elsys ERS Lite-specific:

  • LoRaWAN version: LoRaWAN Specification 1.0.3
  • Regional parameters version: RP001 Regional Parameters 1.0.3 revision A

After configuring your device, select the Register end device button.

{{< figure src="elsys-ers-lite-manually.png" alt="Settings for manual registration" >}}

Monitoring Live Data

When your device is registered, select the Live Data tab to view all messages exchanged between the end device and {{% tts %}}.

{{< figure src="elsys-ers-lite-live-data.png" alt="Live data tab" >}}