Skip to content

Latest commit

 

History

History
75 lines (49 loc) · 1.77 KB

sipmobile.org-Connect SIP PBX.md

File metadata and controls

75 lines (49 loc) · 1.77 KB

Connect SIP PBX Posted on August 24, 2014 by snlsnl — No Comments ↓

You can connect SIP PBX to out service to make outgoing calls and incoming calls from mobile clients.

First of all you must create Sipmobile account,

change password to be able to edit your account.

Below is an example how to connect Asterisk PBX. Outgoing calls

  1. If you have compiled Asterisk from source please ensure you have enabled SRTP:

./configure make menuselect (check res_srtp in “resource modules”) make make install

If you are using Asterisk distributions like FreePBX – consult corresponding documentation.

You can check that SRTP module is loaded by the following commands:

asterisk -r

CLI> module show like srtp

If module is loaded you will see output like this:

Module Description Use Count res_srtp.so Secure RTP (SRTP)

  1. For outgoing calls edit this files:

/etc/asterisk/sip.conf

in [general] section:

register=991xxxxxxx:yyyyyyy@sipmobile.org, where 991xxxxxxx is your phone number, yyyyyyy – your SIP password.

Add section:

[Sipmobile] host=sipmobile.org username=991xxxxxxx secret=yyyyyyy type=peer fromuser=991xxxxxxx fromdomain=sipmobile.org outboundproxy=sip.sipmobile.org context=to-trunk-sip-Sipmobile encryption=yes

Edit your extensions.conf to forward calls to Sipmobile trunk.

Example:

exten => tdial,n,Dial(SIP/Sipmobile/${OUTNUM},90,Tt)

  1. Pay some money in Bulling and Payments and you are ready to make cheep international calls. Incoming calls

Add the following section to your sip.conf:

[Sipmobile] host=144.76.238.124 type=peer canreinvite=no context=from-trunk-sipmobile encryption=yes transport=udp,tcp,tls

In extensions.conf under the section [from-trunk-sipmobile] you can set your rooting logic.

If you have questions please contact support@sipmobile.org