Ctrl c, Ctrl v, Ctrl x?

[vvanhee]

How to do a CTRL c v x z using this keymap? There must be a way! Thanks

[vderm]

You get ctrl by pressing and holding either "z" or "m" and then pressing whatever else key. For "ctrl+c" you press and hold "z" and tap "c" or press and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold n". Hope this helps,

…

On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, ***@***.***> wrote: How to do a CTRL c v x z using this keymap? There must be a way! Thanks — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz> .

[vvanhee]

I tried doing that, but it doesn't seem to work On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros <notifications@github.com> wrote:

…

You get ctrl by pressing and holding either "z" or "m" and then pressing whatever else key. For "ctrl+c" you press and hold "z" and tap "c" or press and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold n". Hope this helps, On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, ***@***.***> wrote: > How to do a CTRL c v x z using this keymap? There must be a way! Thanks > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#1>, or mute the thread > < https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz > > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz> .

[vderm]

Did you try with "hold m" as Ctrl? Do the layers work? Like to get the numbers and arrows etc? Does hold space for shift work? Might be a qmk firmware issue? I dont know On Mon, Mar 25, 2019, 13:20 Victor C. Van Hee, <notifications@github.com> wrote:

…

I tried doing that, but it doesn't seem to work On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros < ***@***.***> wrote: > You get ctrl by pressing and holding either "z" or "m" and then pressing > whatever else key. For "ctrl+c" you press and hold "z" and tap "c" or press > and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold n". > > Hope this helps, > > On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, ***@***.*** > > wrote: > > > How to do a CTRL c v x z using this keymap? There must be a way! Thanks > > > > — > > You are receiving this because you are subscribed to this thread. > > Reply to this email directly, view it on GitHub > > <#1>, or mute the thread > > < > https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz > > > > . > > > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#1 (comment) >, > or mute the thread > < https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz > > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AKsxYEvZxbRiI4_TIR9mHUMv0AjHYMe0ks5vaQVqgaJpZM4cHYuz> .

[vvanhee]

Everything else seems to work like numbers and capital letters and !@#..., but it seems that holding down z makes the bottom row not accept taps, registering them as holds. Same thing happens holding down m On Mon, Mar 25, 2019, 12:48 PM Vasken Dermardiros <notifications@github.com> wrote:

…

Did you try with "hold m" as Ctrl? Do the layers work? Like to get the numbers and arrows etc? Does hold space for shift work? Might be a qmk firmware issue? I dont know On Mon, Mar 25, 2019, 13:20 Victor C. Van Hee, ***@***.***> wrote: > I tried doing that, but it doesn't seem to work > > On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros < > ***@***.***> > wrote: > > > You get ctrl by pressing and holding either "z" or "m" and then pressing > > whatever else key. For "ctrl+c" you press and hold "z" and tap "c" or > press > > and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold n". > > > > Hope this helps, > > > > On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, < ***@***.*** > > > > wrote: > > > > > How to do a CTRL c v x z using this keymap? There must be a way! Thanks > > > > > > — > > > You are receiving this because you are subscribed to this thread. > > > Reply to this email directly, view it on GitHub > > > <#1>, or mute the thread > > > < > > > https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz > > > > > > . > > > > > > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub > > < #1 (comment) > >, > > or mute the thread > > < > https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz > > > > . > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#1 (comment) >, > or mute the thread > < https://github.com/notifications/unsubscribe-auth/AKsxYEvZxbRiI4_TIR9mHUMv0AjHYMe0ks5vaQVqgaJpZM4cHYuz > > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAgOSe6VFcmuEr2NM50gL90KKqLsbtZ6ks5vaQvZgaJpZM4cHYuz> .

[vderm]

I don't really know why it's doing that. I left my keyboard at the office, I'll recompile and upload the files again and see if I get errors. I'm using a pro micro microcontroller and compiling/uploading on windows. On Mon, Mar 25, 2019 at 2:55 PM Victor C. Van Hee <notifications@github.com> wrote:

…

Everything else seems to work like numbers and capital letters and !@#..., but it seems that holding down z makes the bottom row not accept taps, registering them as holds. Same thing happens holding down m On Mon, Mar 25, 2019, 12:48 PM Vasken Dermardiros < ***@***.***> wrote: > Did you try with "hold m" as Ctrl? > > Do the layers work? Like to get the numbers and arrows etc? Does hold space > for shift work? > > Might be a qmk firmware issue? I dont know > > On Mon, Mar 25, 2019, 13:20 Victor C. Van Hee, ***@***.*** > > wrote: > > > I tried doing that, but it doesn't seem to work > > > > On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros < > > ***@***.***> > > wrote: > > > > > You get ctrl by pressing and holding either "z" or "m" and then > pressing > > > whatever else key. For "ctrl+c" you press and hold "z" and tap "c" or > > press > > > and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold n". > > > > > > Hope this helps, > > > > > > On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, < > ***@***.*** > > > > > > wrote: > > > > > > > How to do a CTRL c v x z using this keymap? There must be a way! > Thanks > > > > > > > > — > > > > You are receiving this because you are subscribed to this thread. > > > > Reply to this email directly, view it on GitHub > > > > <#1>, or mute the > thread > > > > < > > > > > > https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz > > > > > > > > . > > > > > > > > > > — > > > You are receiving this because you authored the thread. > > > Reply to this email directly, view it on GitHub > > > < > #1 (comment) > > >, > > > or mute the thread > > > < > > > https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz > > > > > > . > > > > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub > > < #1 (comment) > >, > > or mute the thread > > < > https://github.com/notifications/unsubscribe-auth/AKsxYEvZxbRiI4_TIR9mHUMv0AjHYMe0ks5vaQVqgaJpZM4cHYuz > > > > . > > > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#1 (comment) >, > or mute the thread > < https://github.com/notifications/unsubscribe-auth/AAgOSe6VFcmuEr2NM50gL90KKqLsbtZ6ks5vaQvZgaJpZM4cHYuz > > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AKsxYJ903cmkFK30rokmlE7Hp0ggZYjjks5vaRuHgaJpZM4cHYuz> .

[vderm]

Just tried it again and everything is working for me. I had uploaded a pre-compiled hex file (link: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alpha/keymaps/vderm) too, did you give that a try? I compiled my files on my laptop running linux and uploaded it using the QMK Toolbox on windows. On Mon, Mar 25, 2019 at 5:33 PM Vasken Dermardiros <vdermardiros@gmail.com> wrote:

…

I don't really know why it's doing that. I left my keyboard at the office, I'll recompile and upload the files again and see if I get errors. I'm using a pro micro microcontroller and compiling/uploading on windows. On Mon, Mar 25, 2019 at 2:55 PM Victor C. Van Hee < ***@***.***> wrote: > Everything else seems to work like numbers and capital letters and !@#..., > but it seems that holding down z makes the bottom row not accept taps, > registering them as holds. Same thing happens holding down m > > On Mon, Mar 25, 2019, 12:48 PM Vasken Dermardiros < > ***@***.***> > wrote: > > > Did you try with "hold m" as Ctrl? > > > > Do the layers work? Like to get the numbers and arrows etc? Does hold > space > > for shift work? > > > > Might be a qmk firmware issue? I dont know > > > > On Mon, Mar 25, 2019, 13:20 Victor C. Van Hee, < > ***@***.***> > > wrote: > > > > > I tried doing that, but it doesn't seem to work > > > > > > On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros < > > > ***@***.***> > > > wrote: > > > > > > > You get ctrl by pressing and holding either "z" or "m" and then > > pressing > > > > whatever else key. For "ctrl+c" you press and hold "z" and tap "c" > or > > > press > > > > and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold > n". > > > > > > > > Hope this helps, > > > > > > > > On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, < > > ***@***.*** > > > > > > > > wrote: > > > > > > > > > How to do a CTRL c v x z using this keymap? There must be a way! > > Thanks > > > > > > > > > > — > > > > > You are receiving this because you are subscribed to this thread. > > > > > Reply to this email directly, view it on GitHub > > > > > <#1>, or mute the > > thread > > > > > < > > > > > > > > > > https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz > > > > > > > > > > . > > > > > > > > > > > > > — > > > > You are receiving this because you authored the thread. > > > > Reply to this email directly, view it on GitHub > > > > < > > #1 (comment) > > > >, > > > > or mute the thread > > > > < > > > > > > https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz > > > > > > > > . > > > > > > > > > > — > > > You are receiving this because you commented. > > > Reply to this email directly, view it on GitHub > > > < > #1 (comment) > > >, > > > or mute the thread > > > < > > > https://github.com/notifications/unsubscribe-auth/AKsxYEvZxbRiI4_TIR9mHUMv0AjHYMe0ks5vaQVqgaJpZM4cHYuz > > > > > > . > > > > > > > — > > You are receiving this because you authored the thread. > > Reply to this email directly, view it on GitHub > > <#1 (comment) > >, > > or mute the thread > > < > https://github.com/notifications/unsubscribe-auth/AAgOSe6VFcmuEr2NM50gL90KKqLsbtZ6ks5vaQvZgaJpZM4cHYuz > > > > . > > > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#1 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/AKsxYJ903cmkFK30rokmlE7Hp0ggZYjjks5vaRuHgaJpZM4cHYuz> > . >

[vvanhee]

Thanks for your help! It's working now; I don't know what was happening previously ¯\_(ツ)_/¯ On Tue, Mar 26, 2019, 11:40 AM Vasken Dermardiros <notifications@github.com> wrote:

…

Just tried it again and everything is working for me. I had uploaded a pre-compiled hex file (link: https://github.com/qmk/qmk_firmware/tree/master/keyboards/alpha/keymaps/vderm ) too, did you give that a try? I compiled my files on my laptop running linux and uploaded it using the QMK Toolbox on windows. On Mon, Mar 25, 2019 at 5:33 PM Vasken Dermardiros ***@***.*** > wrote: > I don't really know why it's doing that. I left my keyboard at the office, > I'll recompile and upload the files again and see if I get errors. I'm > using a pro micro microcontroller and compiling/uploading on windows. > > On Mon, Mar 25, 2019 at 2:55 PM Victor C. Van Hee < > ***@***.***> wrote: > >> Everything else seems to work like numbers and capital letters and !@#..., >> but it seems that holding down z makes the bottom row not accept taps, >> registering them as holds. Same thing happens holding down m >> >> On Mon, Mar 25, 2019, 12:48 PM Vasken Dermardiros < >> ***@***.***> >> wrote: >> >> > Did you try with "hold m" as Ctrl? >> > >> > Do the layers work? Like to get the numbers and arrows etc? Does hold >> space >> > for shift work? >> > >> > Might be a qmk firmware issue? I dont know >> > >> > On Mon, Mar 25, 2019, 13:20 Victor C. Van Hee, < >> ***@***.***> >> > wrote: >> > >> > > I tried doing that, but it doesn't seem to work >> > > >> > > On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros < >> > > ***@***.***> >> > > wrote: >> > > >> > > > You get ctrl by pressing and holding either "z" or "m" and then >> > pressing >> > > > whatever else key. For "ctrl+c" you press and hold "z" and tap "c" >> or >> > > press >> > > > and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold >> n". >> > > > >> > > > Hope this helps, >> > > > >> > > > On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, < >> > ***@***.*** >> > > > >> > > > wrote: >> > > > >> > > > > How to do a CTRL c v x z using this keymap? There must be a way! >> > Thanks >> > > > > >> > > > > — >> > > > > You are receiving this because you are subscribed to this thread. >> > > > > Reply to this email directly, view it on GitHub >> > > > > <#1>, or mute the >> > thread >> > > > > < >> > > > >> > > >> > >> https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz >> > > > > >> > > > > . >> > > > > >> > > > >> > > > — >> > > > You are receiving this because you authored the thread. >> > > > Reply to this email directly, view it on GitHub >> > > > < >> > #1 (comment) >> > > >, >> > > > or mute the thread >> > > > < >> > > >> > >> https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz >> > > > >> > > > . >> > > > >> > > >> > > — >> > > You are receiving this because you commented. >> > > Reply to this email directly, view it on GitHub >> > > < >> #1 (comment) >> > >, >> > > or mute the thread >> > > < >> > >> https://github.com/notifications/unsubscribe-auth/AKsxYEvZxbRiI4_TIR9mHUMv0AjHYMe0ks5vaQVqgaJpZM4cHYuz >> > > >> > > . >> > > >> > >> > — >> > You are receiving this because you authored the thread. >> > Reply to this email directly, view it on GitHub >> > < #1 (comment) >> >, >> > or mute the thread >> > < >> https://github.com/notifications/unsubscribe-auth/AAgOSe6VFcmuEr2NM50gL90KKqLsbtZ6ks5vaQvZgaJpZM4cHYuz >> > >> > . >> > >> >> — >> You are receiving this because you commented. >> Reply to this email directly, view it on GitHub >> <#1 (comment) >, >> or mute the thread >> < https://github.com/notifications/unsubscribe-auth/AKsxYJ903cmkFK30rokmlE7Hp0ggZYjjks5vaRuHgaJpZM4cHYuz > >> . >> > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAgOSauXQ5_z4ecWzX26lwbMDYyFHPm_ks5vak1wgaJpZM4cHYuz> .

[vderm]

Sometimes problems, just solves themselves. On Tue, Mar 26, 2019 at 3:11 PM Victor C. Van Hee <notifications@github.com> wrote:

…

Thanks for your help! It's working now; I don't know what was happening previously ¯\_(ツ)_/¯ On Tue, Mar 26, 2019, 11:40 AM Vasken Dermardiros < ***@***.***> wrote: > Just tried it again and everything is working for me. I had uploaded a > pre-compiled hex file (link: > > https://github.com/qmk/qmk_firmware/tree/master/keyboards/alpha/keymaps/vderm > ) > too, did you give that a try? > > I compiled my files on my laptop running linux and uploaded it using the > QMK Toolbox on windows. > > On Mon, Mar 25, 2019 at 5:33 PM Vasken Dermardiros < ***@***.*** > > > wrote: > > > I don't really know why it's doing that. I left my keyboard at the > office, > > I'll recompile and upload the files again and see if I get errors. I'm > > using a pro micro microcontroller and compiling/uploading on windows. > > > > On Mon, Mar 25, 2019 at 2:55 PM Victor C. Van Hee < > > ***@***.***> wrote: > > > >> Everything else seems to work like numbers and capital letters and > !@#..., > >> but it seems that holding down z makes the bottom row not accept taps, > >> registering them as holds. Same thing happens holding down m > >> > >> On Mon, Mar 25, 2019, 12:48 PM Vasken Dermardiros < > >> ***@***.***> > >> wrote: > >> > >> > Did you try with "hold m" as Ctrl? > >> > > >> > Do the layers work? Like to get the numbers and arrows etc? Does hold > >> space > >> > for shift work? > >> > > >> > Might be a qmk firmware issue? I dont know > >> > > >> > On Mon, Mar 25, 2019, 13:20 Victor C. Van Hee, < > >> ***@***.***> > >> > wrote: > >> > > >> > > I tried doing that, but it doesn't seem to work > >> > > > >> > > On Mon, Mar 25, 2019, 12:16 PM Vasken Dermardiros < > >> > > ***@***.***> > >> > > wrote: > >> > > > >> > > > You get ctrl by pressing and holding either "z" or "m" and then > >> > pressing > >> > > > whatever else key. For "ctrl+c" you press and hold "z" and tap "c" > >> or > >> > > press > >> > > > and hold "m" and tap "c", etc. Alt is mapped on "hold x" and "hold > >> n". > >> > > > > >> > > > Hope this helps, > >> > > > > >> > > > On Mon, Mar 25, 2019, 12:58 Victor C. Van Hee, < > >> > ***@***.*** > >> > > > > >> > > > wrote: > >> > > > > >> > > > > How to do a CTRL c v x z using this keymap? There must be a way! > >> > Thanks > >> > > > > > >> > > > > — > >> > > > > You are receiving this because you are subscribed to this > thread. > >> > > > > Reply to this email directly, view it on GitHub > >> > > > > <#1>, or mute the > >> > thread > >> > > > > < > >> > > > > >> > > > >> > > >> > https://github.com/notifications/unsubscribe-auth/AKsxYOfOhJ6c1T8BZjzzTx2v-dZZTN5Uks5vaQA3gaJpZM4cHYuz > >> > > > > > >> > > > > . > >> > > > > > >> > > > > >> > > > — > >> > > > You are receiving this because you authored the thread. > >> > > > Reply to this email directly, view it on GitHub > >> > > > < > >> > > #1 (comment) > >> > > >, > >> > > > or mute the thread > >> > > > < > >> > > > >> > > >> > https://github.com/notifications/unsubscribe-auth/AAgOSTNvbBS6P19sjFIIB651v2Ujkuepks5vaQRqgaJpZM4cHYuz > >> > > > > >> > > > . > >> > > > > >> > > > >> > > — > >> > > You are receiving this because you commented. > >> > > Reply to this email directly, view it on GitHub > >> > > < > >> #1 (comment) > >> > >, > >> > > or mute the thread > >> > > < > >> > > >> > https://github.com/notifications/unsubscribe-auth/AKsxYEvZxbRiI4_TIR9mHUMv0AjHYMe0ks5vaQVqgaJpZM4cHYuz > >> > > > >> > > . > >> > > > >> > > >> > — > >> > You are receiving this because you authored the thread. > >> > Reply to this email directly, view it on GitHub > >> > < > #1 (comment) > >> >, > >> > or mute the thread > >> > < > >> > https://github.com/notifications/unsubscribe-auth/AAgOSe6VFcmuEr2NM50gL90KKqLsbtZ6ks5vaQvZgaJpZM4cHYuz > >> > > >> > . > >> > > >> > >> — > >> You are receiving this because you commented. > >> Reply to this email directly, view it on GitHub > >> < #1 (comment) > >, > >> or mute the thread > >> < > https://github.com/notifications/unsubscribe-auth/AKsxYJ903cmkFK30rokmlE7Hp0ggZYjjks5vaRuHgaJpZM4cHYuz > > > >> . > >> > > > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#1 (comment) >, > or mute the thread > < https://github.com/notifications/unsubscribe-auth/AAgOSauXQ5_z4ecWzX26lwbMDYyFHPm_ks5vak1wgaJpZM4cHYuz > > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AKsxYMkDyeOUstB6DRbEEnLow5oh0KLvks5vanDrgaJpZM4cHYuz> .