adl

Arduino Sketches

• Datalogger_V2 is the current version of the datalogger code that is implemented in the stations (edited to fit stations parameters)

• Previous versions contains all the previous versions of the sketches as well as some sketches that could be useful for adding new features to the datalogger

  1. "Datalogger_V1" -> first ittertion of the datalogger code
  2. "Datalogger_DS1307" -> code used for a DS1307 clock instead of the DS3231 (was also the implementation of using time comparison instead of alarms)
  3. "Datalogger_LCD" -> unfinished version that started to implement an LCD screen into the datalogger's funciton
  4. "Datalogger_UI" -> first version that incorperated a user interface into the datalogger
  5. "Datalogger_V2" -> latest version release

• Setup files contain sketches that can be used to help setup the Arduino datalogger

  • Note using the new version of the datalogger code the only setup code that is needed is to setup SDI sensors ("SDI_SensorSetup" or "SDI_SensorTest")
  1. "SDCard_test" -> will test to see if the SD card is readable and gives the storage used on the SD card
  2. "SDI_SensorSetup" -> test the SDI-12 sensor is connected, and allow to change the sensor's address
  3. "SDI_SensorTest" -> test the SDI-12 sensor is connected, and allow to change the sensor's address, and will take measurements to see if the sensor is working
  4. "SetDateTime" -> determines if the clock is working, and allows the user to set the date and time