GFSv16.3.23 - updated USAF snow filename and WW3 optimized point output #2913
Comments
KateFriedman-NOAA
changed the title
KateFriedman-NOAA
changed the title
|
Release branch for this created: https://github.com/NOAA-EMC/global-workflow/tree/release/gfs.v16.3_obsproc_snow Will rename release branch to version once the version is known. |
|
The new snow file will need to be exported from here. I have been using AFWA_GLOBAL_FILE. The AFWA_NH_FILE and AFWA_SH_FILE variables can be removed. How can we test this? |
@ilianagenkova Do you have a para COM for |
|
On Dogwood: /lfs/h2/emc/stmp/iliana.genkova/CRON/R13/com/obsproc/v1.3/g*/*/atmos/usaf -rw-r--r-- 1 iliana.genkova emc 42315832 Sep 12 05:40 gdas.20240912/00/atmos/gdas.t00z.snow.usaf.grib2 |
|
Branch renamed and recut based on |
KateFriedman-NOAA
changed the title
KateFriedman-NOAA
changed the title
@ilianagenkova Is this available on Cactus as well? |
Replace AFWA_NH_FILE and AFWA_SH_FILE with AFWA_GLOBAL_FILE Refs NOAA-EMC#2913
|
@ilianagenkova Do you have a copy of the new obsproc |
Also include mention of related updates for AFWA snow filename and GSI code update. Refs NOAA-EMC#2913
Nevermind, I see it now, thanks!
I've gone ahead and installed copies of both the obsproc and prepobs release branches for this upgrade. I will use the provided COM and installs to test the GFS on Cactus. |
|
@ilianagenkova I ran the GFSv16 workflow with the new Please take a look at the following log and output on WCOSS2-Cactus and let me know if the prep job ran as expected. Thanks! |
|
@KateFriedman-NOAA , thanks for testing the processing end-to-end. The prep job output looks good! |
|
@ilianagenkova Excellent! I see I even reproduced your prepbufr file: Thanks for checking and confirming! |
|
@GeorgeGayno-NOAA I think we're ready for a UFS_UTILS tag to include in the release branch for this update. |
See: https://github.com/ufs-community/UFS_UTILS/releases/tag/ops-gfsv16.3.20 |
Add it back if decision is made to update for saildrone. Refs NOAA-EMC#2913
Add further information to describe change to AFWA global snow file Refs NOAA-EMC#2913
Updates for the new `obsproc/v1.3` and AFWA global snow filename. A new UFS_UTILS tag (`ops-gfsv16.3.20`) is used for the snow filename changes. The prepobs package is also updated to `v1.2.0` but is internal to the upstream obsproc package so only the `prepobs_run_ver` variables are updated for dev mode usage. Additionally, workflow updates are made to allow the EMCSFC_SFC_PREP (sfcprep) job to be run as part of the rocoto mesh in dev/emc mode. A new switch `DO_SFCPREP` is added to `config.base.emc.dyn` and is set to "NO" by default. Setting it to "YES" will add the `sfcprep` job to the rocoto mesh ahead of the `prep` job and will generate the snogrb files that are usually generated in ops and used via the GDA. Refs #2913
|
Once the ARFC in issue #2951 goes in I will sync those updates into the release branch for this. Only remaining question is whether a GSI update to handle saildrone data in the new |
|
@ADCollard and @KateFriedman-NOAA : |
The order of this upgrade was moved back and thus the release branch needed to be remade. Includes all updates for the GFS upgrade to obsproc/v1.3 and the new global AFWA data file. Refs NOAA-EMC#2913
|
Thanks! @RussTreadon-NOAA |
|
Thanks @RussTreadon-NOAA ! I have added the new tag name to PR #3182, which remakes the release branch for this upgrade. @ADCollard and @RussTreadon-NOAA please review when able, thanks! Once approved, I will merge my fork branch into the auth branch, recut the hand-off tag, and coordinate with NCO to get the para install updated. |
|
@KateFriedman-NOAA I checked out your branch and ensured that the GSI tag was checked out as expected. |
|
Awesome, thanks @ADCollard ! |
The order of the upgrade to obsproc/v1.3 and the new AFWA global file was moved back and thus the release branch needed to be remade. This PR includes all updates for the GFS upgrade to obsproc/v1.3 and the new global AFWA data file: - new UFS_UTILS tag (`ops-gfsv16.3.20`) to support new global AFWA file - new GSI tag (`gfsda.v16.3.22`) to support obsproc/v1.3 and saildrone - workflow changes to support obsproc/v1.3 (and prepobs/v1.2 internal to obsproc) and AFWA global file - also workflow changes to allow developers to run the emcsfc_sfc_prep job within the rocoto mesh via `DO_SFCPREP=YES` in config.base This PR is a repeat of prior ones to get this package in place. Refs #2913
|
Hand-off tag recut: https://github.com/NOAA-EMC/global-workflow/releases/tag/EMC-v16.3.22 FYI @DianeStokes-NCO |
NCO provided increase in ncpus to avoid ncpu burst warnings. Refs #2913
|
Added small adjustment to resource settings for the |
The `ww3_outp` is optimized to read per time step binary output and create per point spectral and bull/cbull output. Refs #2913
|
@ADCollard Going back to an old discussion about the GSI saildrone update...can it go into ops before obsproc/v.1.3 goes in? NCO is looking to adjust the order of the upcoming GFS updates due to further delay of obsproc/v1.3. They'd like to know if the GSI saildrone updates can go in before obsproc/v1.3. Let me know, thanks! |
KateFriedman-NOAA
changed the title
Introduces bufr station updates into the GFSv16.3.23 operational package. There are three updated stations and 121 new stations added to the bufr station parm files. Changes provided by @BoCui-NOAA . Refs #2913
WalterKolczynski-NOAA
added
nco-bug
KateFriedman-NOAA
changed the title
Adjust the package to the new v16.3.23 and incorporate updates from the new v16.3.22 package (now ahead of this update). Additionally, the obsproc (and prepobs) updates are backed out for a later upgrade. Now use `obsproc/v1.2.3`. Refs #2913
Description
Updated description:
Changes for this package:
Old description:
The snow data file provided by the USAF has changed names and the new name will go into affect withobsproc.v1.3. The GFS will need to update to use the newobsproc.v1.3and the new snow filename. Additionally, the GSI will require a change in the GSI code (read_prepbufr.f) for the saildrone data.The prepobs package is also updating tov1.2.0withobsproc/v1.3.0. This version is internal to the obsproc package but we'll want to update both obsproc and prepobs versions indevelopfor GFSv17. Will handle that separately.FYI @ilianagenkova @GeorgeGayno-NOAA @ADCollard
Update 10/21/24: NCO pulled the new CO2 fix files for 2025 into the gfs.v16.3.20 para install. Part of issue #2558 will be resolved via this issue.Now going in ahead of this as the new v16.3.20.Update 11/5/24: PlanetIQ GPSRO data is now switched on for active assimilation (NOAA-EMC/GSI#803). The gfsda.v16.3.20 tag was updated to reflect this changes.Went in v16.3.20Target version
v16.3.23 (previously v16.3.22 (previously v16.3.21 (previously v16.3.20)))
Expected workflow changes
- [x] Updateobsproc_ver=v1.3.and PlanetIQ GPSROchangesThe updated UFS_UTILS release tag is being worked under: Issue #973
The test branch is here: release/ops-gfsv16.3.1
Will need to coordinate to pass in the global afwa file from the JJOB to ./scripts/exemcsfc_global_sfc_prep.sh
The text was updated successfully, but these errors were encountered: