Instrument definitions for sequentix cirklon located in the instruments folder.
- Elektron Machinedrum
- Korg Monologue (Copied from sequentix forum user Ripperton.)
- Roland JV-1080
Machinedrum Notes & Instructions (click to expand)
- The default MIDI settings are required for this instrument definition to work. Specifically the setting the
Base MIDI Channelsto 1-4. - Each sound machine (1-16) has a dedicated instrument in order to provide access to all the parameters.
- Suggestion: On the cirklon, I have tracks 16-32 configured to match the machinedrums respective sound machines.
Roland JV-1080 Notes & Instructions (click to expand)
| Parameter | CC# |
|---|---|
| Mod Wheel | CC #1 |
| Control 1 | CC #74 * |
| Control 2 | CC #71 * |
| Reverb EFX Level | CC #91 |
| Chorus EFX Level | CC #93 |
* User-assigned in JV-1080 system settings. See instructions below.
- The JV-1080 doesn’t expose very many parameters via MIDI CC. No filter cutoff, resonance, amp envelope where you might expect to find them. Instead, there are 3 assignable (including the mod wheel) parameters.
- The 3 assignable parameters are patch-specific and configured in the JV-1080.
- The instructions below are required to ensure the CONTROL 1 and CONTROL 2 parameters work correctly.
- The control values are set to CC#74, and CC#71. This is arbitrary and can be set to your preference––just make sure to match the values in the cirklon match those set in JV-1080 using the instructions below.
For performance mode, the mode I've been using on the JV-1080.
- Press PERFORMANCE button.
- Press SYSTEM button.
- Press TONE SWITCH #3 (MIDI) button.
- Use Up/Down arrow buttons to navigate page to “CONTROL ASSIGN”.
- Use Left/Right arrow buttons to edit “Control 1” or “Control 2”.
- Use Jog Wheel to set CC value for numbered control. - For CONTROL 1: CC74 (usually used for filter cutoff) - For CONTROL 2: CC71 (usually used for filter resonance) - NOTE: These values are arbitrary but match the included instrument definition. Must match cirklon track value CC#’s.
- (Optional?) Press UTILITY -> WRITE -> ENTER.
These values should be set as followed on the in the System MIDI settings.
- Press PERFORMANCE button.
- Press SYSTEM button.
- Press TONE SWITCH #3 (MIDI) button.
- Use Up/Down arrow buttons to navigate pages.
Control Channel - 16 Clock - MIDI Stack - shouldn't matter
| Property | Value |
|---|---|
| P.C | ON |
| BnK | ON |
| C.C | ON |
| Vol | ON |
| Hld | ON |
| Bnd | ON |
| Mod | ON |
| Aft | ON |