Releases: Sousastep/sousastep
Releases · Sousastep/sousastep
SousaFX 0.10.2 beta
- Add autopanner.
- Pressing same dpad button twice now reverses playback.
- Declick staircase param.
- Add scatter param, based on boss rc-505’s beat scatter fx.
- Allow stutter to be effected by delays.
- Allow delays to be effected by stutter.
- Allow int/ext fx to be set separately for each of the four delays.
- Add feedback amount binding for delay send 1.
- Allow talkback mic into main delay sends.
- Move wobble inputs post-compression.
- Add compressor post-delays.
- Don’t require swirl to be enabled for max send to be >1.
- Add input volume params.
- Allow R1 & R1 + dpad to control FX Bank selection.
- Boost noise gate by 0.2 after tuba’s silent for more than 20 seconds. That way, after taking a break, the idle vfx animation won’t disengage right when the tuba’s picked up.
- Remove PCL background picture because it was using a bunch of ram.
- Fix PCL ‘is control within deadzone’ initialization.
- Removed Main Preset 1 - 4 bindings.
- Removed 16th quintuplet, and 32nd quintuplet.
- Add LFO Main Speed.
- Add LFO Floor Envelope Curve.
- Add Main Input Delay 1 fdbk.
- Add SoloFX Toggle.
- Add octaver mute.
- Allow looper fadeout trigger to quantize to either one bar or one loop.
- Add looper menu item for no fadeout, so it can be cleared immediately.
- Disallow tempo changes while looping.
- Allow soloFX to be toggled manually or automatically.
- Fix looper auto-play-after-overdub.
- Allow stutter into looper.
- Disallow stutter into looper at the beginning of the loop.
- Add LFO Main Speed param, with phase-locked loop and consistent min & max speed regardless of bpm or subdivision.
- Add bindings for LFO Main Speed, and LFO Floor Envelope Curve.
- Quantize subdiv rate reset to quarter note instead of whole note, which makes dotted rhythms feel a bit better.
- Fix low amp mod randomized phase offset issue.
- Lower minimum frequency.
- Add squareness param to low amp mod lfos.
- Allow LPF frequency to offset LPF resonance.
misc
- Add frequency weighting options to main envelope, and compressors.
- Add window layout preset system.
- Add volume param pre-compression.
- Adjust crossover’s signal flow - allows lows signal path to either bypass LPF or sum LPF LR.
- Properly clip pitch detection.
- Improve octaver synth pitch detection.
- Add speedlims to try to prevent midi port from crashing once in a blue moon.
- Have mono compressor use the same UI template as the stereo compressor.
- Ensure main UI flashes green on auto-save.
- Fix metro auto-enable logic issue.
- Add video playback patcher for collabs.
- Allow SousaFX Startup to launch streaming PC via Wake On LAN.
- Allow fx selection to load vfx presets.
- Include env pause in vfx env rate-mult output.
- Add polarkaleido implementations.
- Add Poly Star, and Spiral ISF shaders.
- Display twitch emotes via streamelements > obs > virtualcam.
SousaFX 0.10.1 beta
SousaFX
- Add two new bindable parameters to the Modulation Parameters: LFO Auto-Wah Pause, and LFO Env Pause.
- Controller Bindings: Allow multiple imputs to bind to a single output.
- Refactor the Mix Bus and Monitor Mix to make them less confusing.
- Refactor Post-crossfade FX’s signal chain into Solo FX. The main signal path auto-switches from Wobble FX to Solo FX when the looper finishes recording, and vice versa when looper finishes fading out.
- Add filter boost parameters to Main Envelope to allow frequency weighing.
- Scale the Modulation Parameters’ envelope so that it begins at the bottom of the Envelope Crossfade’s gate.
- Add limiter parameter to the delay’s feedback loop.
- Allow stutter’s startpoint to be modulated via the “staircase” parameter.
- Add peak meters to main window.
- Remove Looper’s option to auto-play next scene in Ableton once looper finishes fading out. Instead, trigger a random drum clip based on the current tempo.
- Fix Parameter Control Logic bug where some instances were referring to incorrect bindings.
- Add options for Parameter Control Logic to utilize RB, RT, and LT instead of “is tuba playing”.
- Remove Parameter Control Logic’s cool background because it was using lots of RAM.
SousaVFX
- Refactor preset management system.
SousaPlayback
- Add tempo automation clips for SousaFX to trigger.
SousaFX 0.9.4 beta
SousaFX
- Delay sends allow cross-feedback.
- Transients can trigger octaver synth ramp down.
- Startup Preferences can launch custom Ableton projects.
- Looper can auto-record after main audio input drops below the noise gate a certain number of times.
- After the looper’s done fading out, the auto-preset change now waits until the tuba stops playing.
- Drum and looper mute buttons now unmute when held, and toggle mute when single-clicked.
- Main output is now sidechained to the talkback mic, which must be manually unmuted after the tuba stops playing.
- Lowpass filter type can randomize when looper finishes fading out.
- Initial preset can be set for the bindings and main presets.
- Refactor envelopes and add main envelope sensitivity parameter.
- Allow RNBO compressors’ sidechain EQ’s midfreq to boost up to 36 dB.
- Allow post-crossfade FX to effect the attack signal path, sustain signal path, or both, and let this be set by looper status.
- Add BasicFX for using SousaVFX without SousaFX.
- Allow the Modulation Parameters’ function’s breakpoint positions to be adjusted and saved to the main preset.
- Improve documentation.
SousaPlayback
- Allow Live Link to be enabled automatically on startup.
- When SousaFX starts up, SousaPlayback’s first scene auto-plays, and second scene’s selected.
- Next scene can auto-play when SousaFX’s looper finishes fading out.
- Clips can randomize when SousaFX’s looper finishes fading out.
- Talkback mic auto-mutes itself when tuba starts playing.
- Risers can auto-play when SousaFX’s looper starts fading out.
SousaVFX
- Remove Twitch bot. Will return later.
- Allow Kick & Snare envelope to affect params.
- Replace scaling abstraction’s one-row matrix with menu.
SousaFX 0.9.3 beta
The first official release of SousaFX!