Spoolman to slicer config generator

Intro

A python program to create filament configurations in OrcaSlicer and SuperSlicer from the active spools in Spoolman's database.'

It could easily be extended to support more slicers.

The filament configuration files are based on templates. My templates are included in the repo, but you should make your own based on your settings. See below for how to do that.

The workflow

You add your spools' manufacturers, filaments and the spools to Spoolman.

For each filament that has at least one active spool, spoolman2slicer creates a filament configuration.

The next time you start the slicer you will see the available filaments.

My templates contain a "filament_start_gcode" command, ASSERT_ACTIVE_FILAMENT ID={{id}}, which comes from this file in my other repo, nfc2klipper. It will run whenever the print starts to use that filament.

That macro checks that the active_filament variable is the same as the choosen filament.

The active_filament variable is set by first calling SET_ACTIVE_FILAMENT ID= and the id. That is called automatically by nfc2klipper.

There is a Moonraker agent spool2klipper that can be used to update the active_filament variable whenever the spool is changed in moonraker (via frontends, code macros) etc.

Usage

usage: spoolman2slicer.py [-h] [--version] -d DIR
                          [-s {orcaslicer,prusaslicer,slic3r,superslicer}]
                          [-u URL] [-U] [-D]

Fetches filaments from Spoolman and creates slicer filament config files.

options:
  -h, --help            show this help message and exit
  --version             show program\'s version number and exit
  -d DIR, --dir DIR     the filament config dir
  -s {orcaslicer,prusaslicer,slic3r,superslicer}, --slicer {orcaslicer,prusaslicer,slic3r,superslicer}
                        the slicer
  -u URL, --url URL     URL for the Spoolman installation
  -U, --updates         keep running and update filament configs if they\'re
                        updated in Spoolman
  -v, --verbose         verbose output
  -D, --delete-all      delete all filament configs before adding existing
                        ones

Prepare for running

Run:

virtualenv venv
. venv/bin/activate
pip install -r requirements.txt

Configuring the filament config templates

Intro

spoolman2slicer uses Jinja2 templates for the configuration files it creates and it also uses such a template for the configuration files' names.

Where the files are read from

The templates are stored with the filaments' material's name in $HOME/.config/spoolman2slicer/templates-<slicer>/<material>.<suffix>.template.

Where slicer is the used slicer (superslicer or orcaslicer). <material> is the material used in the filament in Spoolman, ie PLA, ABS etc. <suffix> is ini for Super Slicer, info and json for Orca Slicer (it uses two files per filament).

Available variables in the templates

The variables available to use in the templates comes from the return data from Spoolman's filament request, described here.

spoolman2slicer also adds its own fields under the sm2s field:

• name - the name of the tool's program file.
• version - the version of the tool.
• now - the time when the file is created.
• now_int - the time when the file is created as the number of seconds since UNIX' epoch.
• slicer_suffix - the filename's suffix.

The available variables, and their values, can be printed by spoolman2slicer when the filament is about to be written. Use the -v argument as argument to spoolman2slicer when it is started.

With my Spoolman install the output can look like this (after pretty printing it):

{
  'id': 17,
  'registered': '2024-10-08T12:23:04Z',
  'name': 'Gilford PLA+ Black',
  'vendor': {
    'id': 8,
    'registered': '2024-10-08T12:20:15Z',
    'name': 'Gilford',
    'extra': {}
  },
  'material': 'PLA',
  'price': 250.0,
  'density': 1.24,
  'diameter': 1.75,
  'weight': 1000.0,
  'spool_weight': 116.0,
  'article_number': '102001A',
  'settings_extruder_temp': 190,
  'settings_bed_temp': 60,
  'color_hex': '000000',
  'extra': {
    'pressure_advance': '0.045'
  },
  'sm2s': {
    'name': 'spoolman2slicer.py',
    'version': '0.0.1',
    'now': 'Sun Jan 26 10:57:51 2025',
    'now_int': 1737885471,
    'slicer_suffix': 'ini'
  }
}

Writing the templates

The default templates are based on mine. They assume there is an extra Spoolman filament field defined called "pressure_advance" and sets the pressure advance settings based on it. The Orca Slicer files also assumes one had added the Voron filaments in Orca Slicer as they inherit from them.

When making your own, it is better to copy your existing filament settings files (one per material) and update the files' fields to use the available variables.

To generate your own templates, copy your existing filament settings from the slicer's config dir (on linux: ~/.config/SuperSlicer/filament/ or ~/.config/OrcaSlicer/user/default/filament/) to the template dir and name it like described above.

In the templates, variables are surrounded by { and }. For variables with values that contain more variables, you write all the variable names with a dot between. Ie the vendor's name (Gilford above) is written as: {vendor.name}. Be careful to use the same style as the original file. If the file wrote "Gilford", remember to keep the " characters around the variable.

There is one special template file, the filename.template. It is used to create the name of the generated files. Just copy the default one.

The templates are quite advanced. Follow the link above to jinja2 to read its documentation.

Run

Ubuntu SuperSlicer

./spoolman2slicer.py -U -d ~/.config/SuperSlicer/filament/

Ubuntu OrcaSlicer

./spoolman2slicer.py -s orcaslicer -U -d ~/.config/OrcaSlicer/user/default/filament/

MacOs OrcaSlicer

./spoolman2slicer.py -s orcaslicer -U -d  ~/Library/Application\ Support/OrcaSlicer/user/default/filament

See the other options above.

Development

Please format the code with make fmt and lint it with make lint before making a PR.