Skip to content

XFM2 XVA1 Basic PCB

Jump to bottom
Benjamin Zeiss edited this page Feb 28, 2022 · 8 revisions

Please read the disclaimer before consdering to use this.

This PCB is essentially a hacked together PCB version of the original XFM2 schematic with some added pins for spdif, uart, led's and so on. It's essentially something for those of us who want something slightly nicer than a soldered perfboard and who don't want to do the wiring by hand.

Images

Schematic, Layout and Gerbers

  • Schematic (TODO)
  • PCB Layout (TODO)
  • Gerber

Bill of Materials

The BOM is the same as for the original board from futur3soundz.com. The exception is the optional pins that you may or may not want to add. For that, you'll need some additional 2.54mm pin headers. Please use sockets at least for the CMOD A7 and possibly also for the DAC.

Build instructions

Please know what you are doing when you intend to use this.

Where can I get this?

This board is open-source and DIY. It uses only through-hole components and is reasonably easy to solder even for beginners.

Clone this wiki locally