ninaAPI 2.1.7.1

• ⚠️ Breaking Enums are now serialized as strings, check the documentation for concrete updates. Please note, that not everything might be updated correctly ⚠️

• Added support for the Livestack plugin (>= 1.0.0.9)

• livestack/start to start the livestack

• livestack/stop to stop the livestack

• livestack/image/{target}/{filter} to get the current stacked image for a given filter and target

• STACK-UPDATED event in the websocket added, to notify when a new image is available

• Added waitForResult to framing/slew

• Added version to the documentation, it was always there just not documented

• Added application/plugins to get a list of installed plugins

• Added a 1s delay to the IMAGE-SAVE event to give NINA a bit more time to finish up the image

• image/{index} now automatically retries the image retrieval 10 times with a 200ms delay between each try, if it fails to load the image (because it is in use for example)

• Fixed solving a capture image

• Fixed an issue where the slew failed if no image was loaded in the framing assistant. An image is now automatically loaded

ninaAPI 2.1.6.1

• Fixed a critical bug that could cause NINA to crash

ninaAPI 2.1.6.0

• framing/determine-rotation added to determine the rotation from the camera
• camera/set-binning added to set the binning of the camera, the binning mode has to be supported by the camera
• camera/capture:
  • URL parameter omitImage added to ignore the captured image, use if only the platesolve result is of interest
  • URL parameter stream added to stream the image, content type will be either image/jpg or image/png
  • URL parameter waitForResult added to wait for the capture to finish and then return the result. All parameters which you would normally use together with getResult will apply here as well
• Added stream parameter to image/{index} to stream the image, content type will be either image/jpg or image/png
• Added stream parameter to application/screenshot to stream the image, content type will be either image/jpg or image/png
• New Websocket Events:
  • FOCUSER-USER-FOCUSED
  • AUTOFOCUS-FINISHED
  • API-CAPTURE-FINISHED is sent, when camera/capture finishes

ninaAPI 2.1.5.0

• mount/flip added to perfom a meridian flip, the flip will only be executed if it is needed
• mount/slew slews the mount to the specified ra and dec angles
• dome/set-follow to start or stop the dome following the mount
• dome/sync to start a sync of mount and scope
• dome/slew to slew the dome to the specified azimuth angle (degree)
• DOME-SLEWED and DOME-SYNCED added as new events in the websocket

ninaAPI 2.1.4.0

• guider/start now accepts the parameter calibrate to force a calibration (true / false)
• Guider info now contains a State field indicating what the guider is currently doing
• guider/clear-calibration added to clear the current calibration
• guider/graph to get the last n guide steps as configured on the guide graph in NINA (in NINA you can set x to be 50, 100, 200 or 400)

ninaAPI 2.1.3.0

• Added query parameter skipRescan to all connect endpoints, which can be used to skip the rescanning process resulting in a faster connection
• Some websockets events now include more information:
  • FILTERWHEEL-CHANGED includes the previous and new filter
  • FLAT-BRIGHTNESS-CHANGED includes the previous and new brightness
  • SAFETY-CHANGED includes the new status
• image/{index} now also includes parameters to configure the stretch parameters. These default to the profile default if omitted

ninaAPI 2.1.2.0

⚠️ THIS UPDATE REMOVES V1 SUPPORT ⚠️

Changes:

• ⚠️ Breaking Removed support for the deprecated v1 api ⚠️
• Added more endpoints to flatdevice:
  • flatdevice/set-cover to open or close the cover
  • flatdevice/set-light to toggle the light on or off
  • flatdevice/set-brightness to change the brightness of the flatpanel
• Added more events regarding the flat panel:
  • FLAT-LIGHT-TOGGLED
  • FLAT-COVER-OPENED
  • FLAT-COVER-CLOSED
  • FLAT-BRIGHTNESS-CHANGED
• Added sequence/set-target to update the target in a target container
• The server now automatically picks the next available port to launch the api
• Implemented IMessageBroker for cross Plugin communication. Use Topic AdvancedAPI.RequestPort to request the port the api is running on, subscribe to AdvancedAPI.Port to recieve the answer. The port is directly written into Content

ninaAPI 2.1.1.0

Promotion to release channel

• Fixed an issue where the sequence wasn't complete when the target container was nested

ninaAPI 2.1.0.0-beta 7

• profile/change-value fixes
• framing/set-source added
• camera/set-readout added to set the readout mode
• version now returns the Plugin Version instead of an Independent Version number

ninaAPI 2.1.0.0-beta 6

• Moved GlobalTriggers to the top of the returned json as it seems to have caused confusion
• Added the field ImageType to the IMAGE-SAVE Event and image-history
• Removed the Id field from image-history, just use the index of the Image in the returned Array
• All Image Types (LIGHT, DARK, BIAS, FLAT, SNAPSHOT) now raise an IMAGE-SAVE event
• Eventwatchers are now started independently of the api, therefore Events can still be retrieved using event-history even if the api wasn't running before.