Add pre-commit hook and vm_image_builder job

.flake8

@@ -13,4 +13,4 @@ extend-ignore = W503,E203,E501,W505
 max-line-length = 88
 max-doc-length = 120
 
-per-file-ignores = __init__.py:F401,E402
+per-file-ignores = __init__.py:F401,E402

.github/workflows/build.yml

@@ -2,41 +2,40 @@ name: knx-stack
 
 on:
   push:
-    branches: [ kickoff ]
+    branches: [kickoff]
   pull_request:
-    branches: [ kickoff ]
+    branches: [kickoff]
 
 jobs:
   build:
-
     runs-on: ubuntu-latest
 
     steps:
-    - uses: actions/checkout@v2
-    - name: Set up Python 3.8
-      uses: actions/setup-python@v2
-      with:
-        python-version: 3.8
-    - name: Install dependencies
-      run: |
-        python -m pip install --upgrade pip
-        pip install flake8 pytest coverage
-        if [ -f requirements.txt ]; then pip install -r requirements.txt; fi
-        python setup.py install
-    # - name: Lint with flake8
-    #  run: |
-        # stop the build if there are Python syntax errors or undefined names
-        # flake8 . --count --select=E9,F63,F7,F82 --show-source --statistics
-        # exit-zero treats all errors as warnings. The GitHub editor is 127 chars wide
-        # flake8 . --count --exit-zero --max-complexity=10 --max-line-length=127 --statistics
-    - name: Test and Coverage
-      run: |
-        python -m coverage run
-        python -m coverage report
-    - name: Build egg
-      run: |
-        python setup.py bdist_egg        
-    - name: Upload a Build Artifact
-      uses: actions/upload-artifact@v2.1.4
-      with:
-        path: dist/*
+      - uses: actions/checkout@v2
+      - name: Set up Python 3.8
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.8
+      - name: Install dependencies
+        run: |
+          python -m pip install --upgrade pip
+          pip install flake8 pytest coverage
+          if [ -f requirements.txt ]; then pip install -r requirements.txt; fi
+          python setup.py install
+      # - name: Lint with flake8
+      #  run: |
+      # stop the build if there are Python syntax errors or undefined names
+      # flake8 . --count --select=E9,F63,F7,F82 --show-source --statistics
+      # exit-zero treats all errors as warnings. The GitHub editor is 127 chars wide
+      # flake8 . --count --exit-zero --max-complexity=10 --max-line-length=127 --statistics
+      - name: Test and Coverage
+        run: |
+          python -m coverage run
+          python -m coverage report
+      - name: Build egg
+        run: |
+          python setup.py bdist_egg
+      - name: Upload a Build Artifact
+        uses: actions/upload-artifact@v2.1.4
+        with:
+          path: dist/*

.packit.yaml

@@ -1,13 +1,15 @@
 # See the documentation for more information:
 # https://packit.dev/docs/configuration/
-packit_instances: ["stg", ]
+packit_instances: ["stg", "prod"]
 
 specfile_path: python-knx-stack.spec
 
 # add or remove files that should be synced
 synced_files:
-    - python-knx-stack.spec
-    - .packit.yaml
+  - python-knx-stack.spec
+  - .packit.yaml
+
+#release_suffix: ""
 
 # name in upstream package repository or registry (e.g. in PyPI)
 upstream_package_name: knx-stack
@@ -18,15 +20,27 @@ upstream_project_url: https://github.com/majamassarini/knx-stack
 issue_repository: https://github.com/majamassarini/knx-stack
 
 jobs:
-- job: copr_build
-  trigger: pull_request
-  metadata:
+  - job: copr_build
+    trigger: pull_request
     targets: fedora-stable
     owner: mmassari
     project: knx-stack
-- job: copr_build
-  trigger: commit
-  metadata:
+  - job: copr_build
+    trigger: commit
     targets: fedora-stable
     owner: mmassari
     project: knx-stack
+  - job: vm_image_build
+    trigger: pull_request
+    copr_chroot: fedora-36-x86_64
+    owner: mmassari
+    project: knx-stack
+    image_customizations:
+      packages: [python-knx-stack]
+    image_distribution: fedora-36
+    image_request:
+      architecture: x86_64
+      image_type: aws
+      upload_request:
+        type: aws
+        options: {}

.pre-commit-config.yaml

@@ -0,0 +1,59 @@
+# HOWTO: https://pre-commit.com/#usage
+# pip3 install pre-commit
+# pre-commit install -t pre-commit -t pre-push
+
+repos:
+  - repo: https://github.com/asottile/pyupgrade
+    rev: v3.1.0
+    hooks:
+      - id: pyupgrade
+  - repo: https://github.com/psf/black
+    rev: 22.10.0
+    hooks:
+      - id: black
+  - repo: https://github.com/pre-commit/mirrors-prettier
+    rev: v3.0.0-alpha.3
+    hooks:
+      - id: prettier
+  - repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: v4.3.0
+    hooks:
+      - id: check-added-large-files
+      - id: check-ast
+      #- id: check-builtin-literals
+      - id: check-docstring-first
+      - id: check-executables-have-shebangs
+      - id: check-merge-conflict
+      - id: check-symlinks
+      - id: check-yaml
+      - id: detect-private-key
+      - id: end-of-file-fixer
+      - id: mixed-line-ending
+      - id: trailing-whitespace
+  - repo: https://github.com/PyCQA/flake8
+    rev: 5.0.4
+    hooks:
+      - id: flake8
+        args:
+          - --ignore=F821,BLK100
+          # line break before binary operator - introduced by black (W503)
+          # E203 whitespace before ':' - introduced by black (E203)
+          # doctests are not well formatted, lines are too long and are not fixed by black, ignore them (W501)
+          # W505 doc line too long - doctests results are too long end exceed doc line length, ignore them (W505)
+          - --extend-ignore=W503,E203,E501,W505
+          # black setting is 88
+          - --max-line-length=88
+          - --max-doc-length=120
+          - --per-file-ignores=__init__.py:F401,E402
+  #  - repo: https://github.com/PyCQA/isort
+  #    rev: 5.10.1
+  #    hooks:
+  #      - id: isort
+  #        args: [--profile, black]
+  #- repo: https://github.com/pre-commit/mirrors-mypy
+  #  rev: v0.982
+  #  hooks:
+  #    - id: mypy
+  #      args: [--show-error-codes, --ignore-missing-imports]
+  #      additional_dependencies:
+  #        [types-pkg_resources, types-requests, types-python-dateutil]

CHANGELOG.txt

@@ -2,4 +2,4 @@ Change Log
 ----------
 
 Version 0.9.2 Sun Feb 6 2022
-  - first public release
+  - first public release

README.md

@@ -6,13 +6,14 @@
 
 A Python 3 KNX stack, not complete but easily extensible.
 
-It is able to *encode/decode* knx messages for both **USB HID** and **KNXnet IP**.
+It is able to _encode/decode_ knx messages for both **USB HID** and **KNXnet IP**.
 
 It can be used with an **asynchronous** or **synchronous** client.
 
 ## Examples
 
-### Setup 
+### Setup
+
 ```python
     >>> import knx_stack
     >>> individual_address = knx_stack.Address(0x0001)
@@ -137,7 +138,6 @@ It can be used with an **asynchronous** or **synchronous** client.
     ('DPT_Switch', {'action': 'off'})
 ```
 
-
 ## Installation
 
 ```
@@ -155,4 +155,3 @@ Pull requests are welcome.
 ## License
 
 knx-stack is licensed under the MIT license.
-

daemon/Makefile

@@ -3,7 +3,7 @@ SOURCE=usbhid.c
 
 all: $(TARGET)
 
-clean: 
+clean:
 	rm -f knxstack-usbhid-daemon
 
 $(TARGET) : $(SOURCE)

docs/source/addresses.rst

@@ -20,4 +20,3 @@ ThreeLevelStyle
 ---------------
 
 .. autoclass:: knx_stack.address.ThreeLevelStyle
-

docs/source/conf.py

@@ -12,18 +12,19 @@
 
 import os
 import sys
-sys.path.insert(0, os.path.abspath('../../'))
-print(os.path.abspath('../../'))
+
+sys.path.insert(0, os.path.abspath("../../"))
+print(os.path.abspath("../../"))
 
 
 # -- Project information -----------------------------------------------------
 
-project = 'knx-stack'
-copyright = '2021, Maja Massarini'
-author = 'Maja Massarini'
+project = "knx-stack"
+copyright = "2021, Maja Massarini"
+author = "Maja Massarini"
 
 # The full version, including alpha/beta/rc tags
-release = '0.9'
+release = "0.9"
 
 
 # -- General configuration ---------------------------------------------------
@@ -32,18 +33,18 @@
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = [
-    'sphinx.ext.doctest',
-    'sphinx.ext.autodoc',
+    "sphinx.ext.doctest",
+    "sphinx.ext.autodoc",
 ]
 autodoc_inherit_docstrings = True
 autodoc_default_options = {
-    'member-order': 'bysource',
-    'members': True,
-    'undoc-members': True,
+    "member-order": "bysource",
+    "members": True,
+    "undoc-members": True,
 }
 
 # Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
+templates_path = ["_templates"]
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
@@ -56,10 +57,10 @@
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 #
-html_theme = 'sphinx_rtd_theme'
+html_theme = "sphinx_rtd_theme"
 # html_theme = 'nature'
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
+html_static_path = ["_static"]

docs/source/datapointtypes.rst

@@ -62,4 +62,3 @@ Description Factory
 ^^^^^^^^^^^^^^^^^^^^^^
 
 .. autoclass:: knx_stack.datapointtypes.DPT_Value_Power
-