0 PREPAIRING THE HARDWARE

b.o.m

for this project you need:

• a Raspberry pi Zero W (other models work too) with sd-card class10 => 8Gb
• a zigbee module cc3530 or cc 2531
• a power supply with micro usb 3A
• 5 dupont wires (or soldering skills)

software

For the raspberry you have to download the image file and burn this to a good class 10 sdcard of 8gb minimal. I always use Win32diskimager for that.
The zigbee module has to be flashed with the relative firmware (see chapter ZIGBEE MODULE).

wiring

Use the dupontwires to connect your zigbee module to the Raspberry. In case of the cc2531 you need some soldering skills.