merge rusEFI wiki

uaEFI.md

@@ -8,29 +8,15 @@ https://github.com/rusefi/uaefi
  * sequential six smart coils with option of on-board igniters
  * sequential six injector outputs
  * two VRs: one MAX9924 one vr-discrete, both with solder-blob jumper to modify into hall input
+ * two hall inputs
  * dual DC motor to drive ETB/wastegate or stepper idle
  * on-board 4.9 LSU WBO controller
  * four above 1A current low side outputs
  * a couple of lower current low side outputs
  * Flex fuel input
-
-
-
-
-* 100x100cm or less PCB if possible
- * mm100-f4
-
- * two hall inputs
- * flex digital input https://github.com/rusefi/uaefi/issues/5
- * one knock input
- * smaller battery holder
- * both on-board MAP sensor footprints
- * analog inputs https://github.com/rusefi/uaefi/issues/4
- * tripled option USB: 1x5 header, vertical mini and flat USB-C
- * molex 2 row angle connectors with 4.2mm pitch
- * two power GND pins
- * four analog GND pins
- * four +5v sensor power pins
- * one EGT chip MAX31855 see https://github.com/rusefi/rusefi-hardware/tree/main/lambda-x2
+ * knock sensor input
+ * on-board real time clock battery
+ * on-board MAP sensor footprints
+ * on-board EGT input
  * proto area
- * 3-4 mounting holes
+ * 100x100mm 4 layer PCB