Introduction

 

This repository contains the SDL v1.2 source code, ported for the following handheld devices:

• Motorola Photon Q (XT897)
  Utilizes Wayland Client for rendering and is only supported on Sailfish OS v4.4.0.68.
• Motorola Droid 4 (XT894)
  Utilizes Wayland Client for rendering and is only supported on Sailfish OS v4.6.0.15.
• F(x)tec Pro1 (QX1000)
  Utilizes Wayland Client for rendering and is only supported on Sailfish OS v4.4.0.72.
• PINE64 PinePhone
  Utilizes Wayland Client for rendering and is only supported on Sailfish OS v4.6.0.15.
• Miyoo A30
  Uses OpenGL ES 2.0 for rendering. If the installed custom firmware (CFW) does not support OpenGL ES 2.0, this SDL v1.2 build will not work on the device.

 

All dependent libraries are stored in the "dependency" folder and need be built manually after building the SDL library.

smpeg-0.4.5.tar.gz
libmikmod-3.1.21.tar.gz
sdl-1.2-gfx-2.0.25.tar.gz
sdl-1.2-ttf-2.0.11.tar.gz
sdl-1.2-sound-1.0.3.tar.gz
sdl-1.2-image-1.2.12.tar.gz
sdl-1.2-mixer-1.2.12.tar.gz

 

How to Build the Source Code

Motorola Photon Q (XT897)

$ cd
$ git clone https://github.com/steward-fu/sdl
$ cd sdl
$ ./autogen.sh
$ ./configure --enable-video-xt897 --disable-video-x11 --build=arm-linux
$ make -j4
$ sudo make install

 

Motorola Droid 4 (XT894)

$ cd
$ git clone https://github.com/steward-fu/sdl
$ cd sdl
$ ./autogen.sh
$ ./configure --enable-video-xt894 --disable-video-x11 --build=arm-linux
$ make -j4
$ sudo make install

 

F(x)tec Pro1 (QX1000)

$ cd
$ git clone https://github.com/steward-fu/sdl
$ cd sdl
$ ./autogen.sh
$ ./configure --enable-video-qx1000 --disable-video-x11 --build=arm-linux
$ make -j4
$ sudo make install

 

PINE64 PinePhone

$ cd
$ git clone https://github.com/steward-fu/sdl
$ cd sdl
$ ./autogen.sh
$ ./configure --enable-video-pinephone --disable-video-x11 --build=arm-linux
$ make -j4
$ sudo make install

 

Miyoo A30

$ cd
$ wget https://github.com/steward-fu/website/releases/download/miyoo-a30/a30_toolchain-v1.0.tar.gz
$ tar xvf a30_toolchain-v1.0.tar.gz
$ sudo mv a30 /opt

$ export PATH=/opt/a30/bin:$PATH
$ export CC=arm-linux-gcc
$ export CXX=arm-linux-g++
$ export LD=arm-linux-ld
$ export AS=arm-linux-as

$ git clone https://github.com/steward-fu/sdl
$ cd sdl
$ ./autogen.sh
$ ./configure --enable-video-a30 --disable-video-x11 --build=arm-linux
$ make -j4

$ ls build/.libs/*.so*
    build/.libs/libSDL.so
    build/.libs/libSDL-1.2.so.0
    build/.libs/libSDL-1.2.so.0.11.4

 

How to Run the Program with SDL Library

Miyoo A30

Place libSDL-1.2.so.0 and the executable file in the same folder.

# kill -STOP `pidof MainUI`
# LD_LIBRARY_PATH=. ./xxx
# kill -CONT `pidof MainUI`